[PATCH v6 4/4] arm64: dts: cix: sky1: add audss cru

[joakim.zhang@cixtech.com]

From: Joakim Zhang <joakim.zhang@cixtech.com>

Add the AUDSS CRU device node providing clocks and software resets
for audio subsystem peripherals.

Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com>
---
 arch/arm64/boot/dts/cix/sky1.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
index bb5cfb1f2113..6d045d7216e6 100644
--- a/arch/arm64/boot/dts/cix/sky1.dtsi
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -6,6 +6,10 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/cix,sky1.h>
+#include <dt-bindings/clock/cix,sky1-audss-cru.h>
+#include <dt-bindings/reset/cix,sky1-system-control.h>
+#include <dt-bindings/reset/cix,sky1-s5-system-control.h>
+#include <dt-bindings/reset/cix,sky1-audss-cru.h>
 #include "sky1-power.h"
 
 / {
@@ -488,6 +492,20 @@ mbox_pm2ap: mailbox@65a0080 {
 			cix,mbox-dir = "rx";
 		};
 
+		audss_cru: clock-controller@7110000 {
+			compatible = "cix,sky1-audss-cru";
+			reg = <0x0 0x07110000 0x0 0x10000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&scmi_clk CLK_TREE_AUDIO_CLK0>,
+				 <&scmi_clk CLK_TREE_AUDIO_CLK2>,
+				 <&scmi_clk CLK_TREE_AUDIO_CLK4>,
+				 <&scmi_clk CLK_TREE_AUDIO_CLK5>;
+			clock-names = "x8k", "x11k", "sys", "48m";
+			power-domains = <&smc_devpd SKY1_PD_AUDIO>;
+			resets = <&s5_syscon SKY1_AUDIO_HIFI5_NOC_RESET_N>;
+		};
+
 		mbox_sfh2ap: mailbox@8090000 {
 			compatible = "cix,sky1-mbox";
 			reg = <0x0 0x08090000 0x0 0x10000>;
-- 
2.50.1