From: Chris Morgan <macroalpha82@gmail.com>
To: linux-iio@vger.kernel.org
Cc: andy@kernel.org, nuno.sa@analog.com, dlechner@baylibre.com,
jic23@kernel.org, jean-baptiste.maneyrol@tdk.com,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
robh@kernel.org, andriy.shevchenko@intel.com,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V14 7/9] iio: imu: inv_icm42607: Add Gyroscope to icm42607
Date: Wed, 24 Jun 2026 13:23:46 -0500 [thread overview]
Message-ID: <20260624182350.50467-8-macroalpha82@gmail.com> (raw)
In-Reply-To: <20260624182350.50467-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
Add gyroscope functions to the icm42607 driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
drivers/iio/imu/inv_icm42607/Makefile | 1 +
drivers/iio/imu/inv_icm42607/inv_icm42607.h | 4 +
.../iio/imu/inv_icm42607/inv_icm42607_core.c | 5 +
.../iio/imu/inv_icm42607/inv_icm42607_gyro.c | 305 ++++++++++++++++++
4 files changed, 315 insertions(+)
create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
diff --git a/drivers/iio/imu/inv_icm42607/Makefile b/drivers/iio/imu/inv_icm42607/Makefile
index 372c6d6bdcec..8e73385c8f4b 100644
--- a/drivers/iio/imu/inv_icm42607/Makefile
+++ b/drivers/iio/imu/inv_icm42607/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_INV_ICM42607) += inv-icm42607.o
inv-icm42607-y += inv_icm42607_core.o
+inv-icm42607-y += inv_icm42607_gyro.o
inv-icm42607-y += inv_icm42607_accel.o
obj-$(CONFIG_INV_ICM42607_I2C) += inv-icm42607-i2c.o
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index cd78b43f36fa..81d56920f356 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -142,6 +142,7 @@ struct inv_icm42607_suspended {
* @lock: lock for serializing multiple registers access.
* @map: regmap pointer.
* @indio_accel: accelerometer IIO device.
+ * @indio_gyro: gyroscope IIO device.
* @vddio_supply: I/O voltage regulator for the chip.
* @vddio_en: I/O voltage status for runtime PM.
* @suspended: suspended sensors configuration.
@@ -153,6 +154,7 @@ struct inv_icm42607_state {
struct mutex lock;
struct regmap *map;
struct iio_dev *indio_accel;
+ struct iio_dev *indio_gyro;
struct regulator *vddio_supply;
bool vddio_en;
struct inv_icm42607_suspended suspended;
@@ -414,6 +416,8 @@ int inv_icm42607_core_probe(struct regmap *regmap,
const struct inv_icm42607_hw *hw,
inv_icm42607_bus_setup bus_setup);
+struct iio_dev *inv_icm42607_gyro_init(struct inv_icm42607_state *st);
+
struct iio_dev *inv_icm42607_accel_init(struct inv_icm42607_state *st);
#endif
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index 26cedec0c97c..a849c68227ae 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -534,6 +534,11 @@ int inv_icm42607_core_probe(struct regmap *regmap,
if (IS_ERR(st->indio_accel))
return PTR_ERR(st->indio_accel);
+ /* Initialize IIO device for Gyro */
+ st->indio_gyro = inv_icm42607_gyro_init(st);
+ if (IS_ERR(st->indio_gyro))
+ return PTR_ERR(st->indio_gyro);
+
return 0;
}
EXPORT_SYMBOL_NS_GPL(inv_icm42607_core_probe, "IIO_ICM42607");
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
new file mode 100644
index 000000000000..c7215b3826ad
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/cleanup.h>
+#include <linux/device/devres.h>
+#include <linux/err.h>
+#include <linux/iio/iio.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#include "inv_icm42607.h"
+
+#define INV_ICM42607_GYRO_CHAN(_modifier, _index, _ext_info) \
+{ \
+ .type = IIO_ANGL_VEL, \
+ .modified = 1, \
+ .channel2 = _modifier, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
+ .ext_info = _ext_info, \
+}
+
+enum inv_icm42607_gyro_scan {
+ INV_ICM42607_GYRO_SCAN_X,
+ INV_ICM42607_GYRO_SCAN_Y,
+ INV_ICM42607_GYRO_SCAN_Z,
+};
+
+static const struct iio_chan_spec_ext_info inv_icm42607_gyro_ext_infos[] = {
+ IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, inv_icm42607_get_mount_matrix),
+ { }
+};
+
+static const struct iio_chan_spec inv_icm42607_gyro_channels[] = {
+ INV_ICM42607_GYRO_CHAN(IIO_MOD_X, INV_ICM42607_GYRO_SCAN_X,
+ inv_icm42607_gyro_ext_infos),
+ INV_ICM42607_GYRO_CHAN(IIO_MOD_Y, INV_ICM42607_GYRO_SCAN_Y,
+ inv_icm42607_gyro_ext_infos),
+ INV_ICM42607_GYRO_CHAN(IIO_MOD_Z, INV_ICM42607_GYRO_SCAN_Z,
+ inv_icm42607_gyro_ext_infos),
+};
+
+static const int inv_icm42607_gyro_scale_nano[][2] = {
+ [INV_ICM42607_GYRO_FS_2000DPS] = { 0, 1065264 },
+ [INV_ICM42607_GYRO_FS_1000DPS] = { 0, 532632 },
+ [INV_ICM42607_GYRO_FS_500DPS] = { 0, 266316 },
+ [INV_ICM42607_GYRO_FS_250DPS] = { 0, 133158 },
+};
+
+static int inv_icm42607_gyro_read_scale(struct iio_dev *indio_dev,
+ int *val, int *val2)
+{
+ struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+ unsigned int idx;
+
+ guard(mutex)(&st->lock);
+
+ idx = st->conf.gyro.fs;
+
+ *val = inv_icm42607_gyro_scale_nano[idx][0];
+ *val2 = inv_icm42607_gyro_scale_nano[idx][1];
+ return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int inv_icm42607_gyro_write_scale(struct iio_dev *indio_dev,
+ int val, int val2)
+{
+ struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+ struct device *dev = regmap_get_device(st->map);
+ unsigned int idx;
+ struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+ size_t scales_len = ARRAY_SIZE(inv_icm42607_gyro_scale_nano);
+ int ret;
+
+ for (idx = 0; idx < scales_len; idx++) {
+ if (val == inv_icm42607_gyro_scale_nano[idx][0] &&
+ val2 == inv_icm42607_gyro_scale_nano[idx][1])
+ break;
+ }
+ if (idx >= scales_len)
+ return -EINVAL;
+
+ conf.fs = idx;
+
+ PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+ ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+ if (ret)
+ return ret;
+
+ guard(mutex)(&st->lock);
+
+ return inv_icm42607_set_sensor_conf(st, &conf, IIO_ANGL_VEL);
+}
+
+static const int inv_icm42607_gyro_odr[][2] = {
+ [INV_ICM42607_ODR_1600HZ] = { 1600, 0 },
+ [INV_ICM42607_ODR_800HZ] = { 800, 0 },
+ [INV_ICM42607_ODR_400HZ] = { 400, 0 },
+ [INV_ICM42607_ODR_200HZ] = { 200, 0 },
+ [INV_ICM42607_ODR_100HZ] = { 100, 0 },
+ [INV_ICM42607_ODR_50HZ] = { 50, 0 },
+ [INV_ICM42607_ODR_25HZ] = { 25, 0 },
+ [INV_ICM42607_ODR_12_5HZ] = { 12, 500000 },
+};
+
+static int inv_icm42607_gyro_read_odr(struct inv_icm42607_state *st,
+ int *val, int *val2)
+{
+ unsigned int odr;
+ unsigned int i;
+
+ guard(mutex)(&st->lock);
+
+ odr = st->conf.gyro.odr;
+
+ for (i = 5; i < ARRAY_SIZE(inv_icm42607_gyro_odr); ++i) {
+ if (i == odr)
+ break;
+ }
+ if (i >= ARRAY_SIZE(inv_icm42607_gyro_odr))
+ return -EINVAL;
+
+ *val = inv_icm42607_gyro_odr[i][0];
+ *val2 = inv_icm42607_gyro_odr[i][1];
+
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int inv_icm42607_gyro_write_odr(struct iio_dev *indio_dev,
+ int val, int val2)
+{
+ struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+ struct device *dev = regmap_get_device(st->map);
+ unsigned int idx;
+ struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+ int ret;
+
+ for (idx = 5; idx < ARRAY_SIZE(inv_icm42607_gyro_odr); ++idx) {
+ if (val == inv_icm42607_gyro_odr[idx][0] &&
+ val2 == inv_icm42607_gyro_odr[idx][1])
+ break;
+ }
+ if (idx >= ARRAY_SIZE(inv_icm42607_gyro_odr))
+ return -EINVAL;
+
+ conf.odr = idx;
+
+ PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+ ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+ if (ret)
+ return ret;
+
+ guard(mutex)(&st->lock);
+
+ return inv_icm42607_set_sensor_conf(st, &conf, IIO_ANGL_VEL);
+}
+
+static int inv_icm42607_gyro_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+ s16 data;
+ int ret;
+
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = inv_icm42607_read_sensor(indio_dev, chan, &data);
+ if (ret)
+ return ret;
+ *val = data;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ return inv_icm42607_gyro_read_scale(indio_dev, val, val2);
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return inv_icm42607_gyro_read_odr(st, val, val2);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int inv_icm42607_gyro_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals,
+ int *type, int *length, long mask)
+{
+ if (chan->type != IIO_ANGL_VEL)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ *vals = (const int *)inv_icm42607_gyro_scale_nano;
+ *type = IIO_VAL_INT_PLUS_NANO;
+ *length = ARRAY_SIZE(inv_icm42607_gyro_scale_nano) * 2;
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *vals = (const int *)inv_icm42607_gyro_odr[5];
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ *length = (ARRAY_SIZE(inv_icm42607_gyro_odr) - 5) * 2;
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int inv_icm42607_gyro_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ int ret;
+
+ if (chan->type != IIO_ANGL_VEL)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ ret = inv_icm42607_gyro_write_scale(indio_dev, val, val2);
+ return ret;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return inv_icm42607_gyro_write_odr(indio_dev, val, val2);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int inv_icm42607_gyro_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ if (chan->type != IIO_ANGL_VEL)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info inv_icm42607_gyro_info = {
+ .read_raw = inv_icm42607_gyro_read_raw,
+ .read_avail = inv_icm42607_gyro_read_avail,
+ .write_raw = inv_icm42607_gyro_write_raw,
+ .write_raw_get_fmt = inv_icm42607_gyro_write_raw_get_fmt,
+};
+
+struct iio_dev *inv_icm42607_gyro_init(struct inv_icm42607_state *st)
+{
+ struct device *dev = regmap_get_device(st->map);
+ const char *name;
+ struct inv_icm42607_sensor_state *gyro_st;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ name = devm_kasprintf(dev, GFP_KERNEL, "%s-gyro", st->hw->name);
+ if (!name)
+ return ERR_PTR(-ENOMEM);
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*gyro_st));
+ if (!indio_dev)
+ return ERR_PTR(-ENOMEM);
+ gyro_st = iio_priv(indio_dev);
+
+ gyro_st->power_mode = INV_ICM42607_SENSOR_MODE_LOW_NOISE;
+ gyro_st->filter = INV_ICM42607_FILTER_BW_73HZ;
+
+ iio_device_set_drvdata(indio_dev, st);
+ indio_dev->name = name;
+ indio_dev->info = &inv_icm42607_gyro_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = inv_icm42607_gyro_channels;
+ indio_dev->num_channels = ARRAY_SIZE(inv_icm42607_gyro_channels);
+
+ ret = devm_iio_device_register(dev, indio_dev);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return indio_dev;
+}
--
2.43.0
next prev parent reply other threads:[~2026-06-24 18:32 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-24 18:23 [PATCH V14 0/9] Add Invensense ICM42607 Chris Morgan
2026-06-24 18:23 ` [PATCH V14 1/9] dt-bindings: iio: imu: icm42600: Add mount-matrix Chris Morgan
2026-06-24 18:23 ` [PATCH V14 2/9] dt-bindings: iio: imu: icm42600: Add icm42607 Chris Morgan
2026-06-24 18:39 ` sashiko-bot
2026-06-24 18:23 ` [PATCH V14 3/9] iio: imu: inv_icm42607: Add inv_icm42607 Core Driver Chris Morgan
2026-06-24 18:23 ` [PATCH V14 4/9] iio: imu: inv_icm42607: Add SPI For icm42607 Chris Morgan
2026-06-24 18:23 ` [PATCH V14 5/9] iio: imu: inv_icm42607: Add PM support for icm42607 Chris Morgan
2026-06-24 18:54 ` sashiko-bot
2026-06-24 18:23 ` [PATCH V14 6/9] iio: imu: inv_icm42607: Add Accelerometer " Chris Morgan
2026-06-24 18:50 ` sashiko-bot
2026-06-24 18:23 ` Chris Morgan [this message]
2026-06-24 18:23 ` [PATCH V14 8/9] iio: imu: inv_icm42607: Add Temp Support in icm42607 Chris Morgan
2026-06-24 18:51 ` sashiko-bot
2026-06-24 18:23 ` [PATCH V14 9/9] arm64: dts: rockchip: Add icm42607p IMU for RG-DS Chris Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260624182350.50467-8-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=andriy.shevchenko@intel.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=heiko@sntech.de \
--cc=jean-baptiste.maneyrol@tdk.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=macromorgan@hotmail.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox