[PATCH v4 11/19] arm64: dts: qcom: sm8550: Add minidump SRAM config to SCM node

[Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>]

Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 396201905ef2..8830da63261f 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -391,6 +391,7 @@ scm: scm {
 			qcom,dload-mode = <&tcsr 0x19000>;
 			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			sram = <&minidump_config>;
 		};
 	};
 
@@ -5537,6 +5538,10 @@ sram@14680000 {
 
 			ranges = <0 0 0x14680000 0x2c000>;
 
+			minidump_config: minidump-sram@1c {
+				reg = <0x1c 0x4>;
+			};
+
 			ipa_modem_tables: modem-tables@8000 {
 				reg = <0x8000 0x2000>;
 			};
-- 
2.53.0