[PATCH v4 13/19] arm64: dts: qcom: sc7280: Add minidump SRAM config to SCM node

[Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>]

Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/kodiak.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi
index fa540d8c2615..6d805cbe5b4f 100644
--- a/arch/arm64/boot/dts/qcom/kodiak.dtsi
+++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi
@@ -720,6 +720,7 @@ firmware {
 		scm: scm {
 			compatible = "qcom,scm-sc7280", "qcom,scm";
 			qcom,dload-mode = <&tcsr_2 0x13000>;
+			sram = <&minidump_config>;
 		};
 	};
 
@@ -6698,6 +6699,10 @@ sram@146a5000 {
 
 			ranges = <0 0 0x146a5000 0x6000>;
 
+			minidump_config: minidump-sram@1c {
+				reg = <0x1c 0x4>;
+			};
+
 			ipa_modem_tables: modem-tables@3000 {
 				reg = <0x3000 0x2000>;
 			};
-- 
2.53.0