Re: [PATCH V15 8/9] iio: imu: inv_icm42607: Add Temp Support in icm42607

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 26 Jun 2026 11:12:29 -0500
Chris Morgan <macroalpha82@gmail.com> wrote:

> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add functions for reading temperature sensor data.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
The earlier comments on read_avail are really about a change need in this patch.

> diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
> index c7215b3826ad..4e5db5e19e9f 100644
> --- a/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
> +++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c

>  
>  static const int inv_icm42607_gyro_scale_nano[][2] = {
> @@ -182,6 +185,11 @@ static int inv_icm42607_gyro_read_raw(struct iio_dev *indio_dev,
>  	switch (chan->type) {
>  	case IIO_ANGL_VEL:
>  		break;
> +	case IIO_TEMP:

This works for read_raw, but the read_avail reported on earlier patches is
still an issue for temperature channels.

> +		if (mask != IIO_CHAN_INFO_SAMP_FREQ)
> +			return inv_icm42607_temp_read_raw(indio_dev, chan,
> +							  val, val2, mask);
> +		break;
>  	default:
>  		return -EINVAL;
>  	}