[PATCH v9 28/38] phy: rockchip: usbdp: Disable USB3 on probe

[Sebastian Reichel <sebastian.reichel@collabora.com>]

Disable USB3 support during probe, so that the driver always starts with
a clean state. With this it no longer makes sense to use -EPROBE_DEFER
for cmn ana lcpll lock timeouts afterwards. This error code should only
appear during probe and the PHY initialization function is also being
called at normal runtime.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 146edd35cf83..f788405dfa1f 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -756,17 +756,7 @@ static int rk_udphy_status_check(struct rk_udphy *udphy)
 					       (val & CMN_ANA_LCPLL_LOCK_DONE), 200, 100000);
 		if (ret) {
 			dev_err(udphy->dev, "cmn ana lcpll lock timeout\n");
-			/*
-			 * If earlier software (U-Boot) enabled USB once already
-			 * the PLL may have problems locking on the first try.
-			 * It will be successful on the second try, so for the
-			 * time being a -EPROBE_DEFER will solve the issue.
-			 *
-			 * This requires further investigation to understand the
-			 * root cause, especially considering that the driver is
-			 * asserting all reset lines at probe time.
-			 */
-			return -EPROBE_DEFER;
+			return ret;
 		}
 
 		if (!udphy->flip) {
@@ -965,6 +955,8 @@ static int rk_udphy_get_initial_status(struct rk_udphy *udphy)
 		msleep(100);
 	}
 
+	rk_udphy_u3_port_disable(udphy, true);
+
 exit:
 	rk_udphy_disable(udphy);
 

-- 
2.53.0