From: Nabige Aala <nabige.aala@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Arpit Saini <arpit.saini@oss.qualcomm.com>,
Nabige Aala <nabige.aala@oss.qualcomm.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/4] arm64: qcom: dts: Add display support for Qualcomm Shikra
Date: Mon, 06 Jul 2026 11:34:40 +0530 [thread overview]
Message-ID: <20260706-shikra-dt-changes-v2-0-56fcd1659ea4@oss.qualcomm.com> (raw)
This series adds display support for the Qualcomm Shikra platform.
It introduces the Qualcomm Shikra MDSS display subsystem support
at the SoC level, and enables display on the Qualcomm Shikra CQS
EVK and CQM EVK boards with the required DSI panel nodes.
---
Changes in v2:
- Replace QCM2290-specific RPM power domain identifiers with generic
RPMPD_VDDCX/VDDMX macros in Shikra display and DSI nodes.
- Add missing blank line before status = "okay" in &mdss_dsi0 node(Dmitry).
- Split avdd-supply and avee-supply into separate regulators vreg_disp_p
and vreg_disp_n instead of sharing the same lcd_bias regulator(Dmitry).
- Sort tlmm pin state entries by pin number: gpio3, gpio86, gpio91,
gpio151 (Dmitry).
- Add vph_pwr as an always-on fixed regulator representing the main
board power supply, used as vin-supply for lcd_bias.
- Droped the 5th patch "Shikra LT9611UXD support". NAK by Dmitry. Once
the hdmi-dsi driver is fixed then we will post DT changes.
- Link to v1: https://patch.msgid.link/20260627-shikra-dt-changes-v1-0-449a402673d0@oss.qualcomm.com
prerequisite-message-id: <20260611-shikra-dt-v5-0-103ed26a8529@oss.qualcomm.com>
prerequisite-message-id: <20260608-shikra-dt-m1-v4-0-2114300594a6@oss.qualcomm.com>
prerequisite-message-id: <20260604-shikra-dispcc-gpucc-v4-0-8204f1029311@oss.qualcomm.com>
prerequisite-message-id: <20260608-shikra-display-v4-0-88a846afdd5d@oss.qualcomm.com>
prerequisite-message-id: <20260618-ili7807s-v2-0-b3f0c109b102@oss.qualcomm.com>
prerequisite-message-id: <20260508134009.4582-1-syyang@lontium.com>
prerequisite-message-id: <20260611-lt9611-b4-send-v1-0-42abbcd3bb1e@oss.qualcomm.com>
Signed-off-by: Arpit Saini <arpit.saini@oss.qualcomm.com>
Signed-off-by: Nabige Aala <nabige.aala@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konradybcio@kernel.org>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: arpit.saini@oss.qualcomm.com
---
Arpit Saini (3):
arm64: dts: qcom: shikra-cqm-evk: Enable display and add ili7807s panel
arm64: defconfig: Enable ILI7807S DSI panel driver
arm64: dts: qcom: shikra-cqs-evk: Enable display and add ili7807s panel
Nabige Aala (1):
arm64: dts: qcom: shikra: Add MDSS display subsystem
arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 126 +++++++++++++++++
arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 126 +++++++++++++++++
arch/arm64/boot/dts/qcom/shikra.dtsi | 203 +++++++++++++++++++++++++++-
arch/arm64/configs/defconfig | 1 +
4 files changed, 454 insertions(+), 2 deletions(-)
---
base-commit: f28fb4ff0d25819c58341fec6e3953f1ebb1fc2e
change-id: 20260626-shikra-dt-changes-8d127be951d5
Best regards,
--
Nabige Aala <nabige.aala@oss.qualcomm.com>
next reply other threads:[~2026-07-06 6:04 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-06 6:04 Nabige Aala [this message]
2026-07-06 6:04 ` [PATCH v2 1/4] arm64: dts: qcom: shikra: Add MDSS display subsystem Nabige Aala
2026-07-06 12:59 ` Konrad Dybcio
2026-07-06 6:04 ` [PATCH v2 2/4] arm64: dts: qcom: shikra-cqm-evk: Enable display and add ili7807s panel Nabige Aala
2026-07-06 6:33 ` Krzysztof Kozlowski
2026-07-06 8:52 ` Arpit Saini
2026-07-06 9:19 ` Krzysztof Kozlowski
2026-07-06 13:48 ` Dmitry Baryshkov
2026-07-06 15:33 ` Krzysztof Kozlowski
2026-07-06 10:03 ` Konrad Dybcio
2026-07-06 6:04 ` [PATCH v2 3/4] arm64: defconfig: Enable ILI7807S DSI panel driver Nabige Aala
2026-07-06 6:04 ` [PATCH v2 4/4] arm64: dts: qcom: shikra-cqs-evk: Enable display and add ili7807s panel Nabige Aala
2026-07-06 6:34 ` Krzysztof Kozlowski
2026-07-06 8:54 ` Arpit Saini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260706-shikra-dt-changes-v2-0-56fcd1659ea4@oss.qualcomm.com \
--to=nabige.aala@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=arpit.saini@oss.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox