[PATCH v9 2/2] arm64: dts: qcom: monaco: enable inline crypto engine for SDHC

[Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>]

From: Neeraj Soni <neeraj.soni@oss.qualcomm.com>

Add the dedicated ICE node for monaco and reference it from the SDHC
controller via qcom,ice.

Also, define power-domains and clocks properties similar to the UFS
node.

Signed-off-by: Neeraj Soni <neeraj.soni@oss.qualcomm.com>
Co-developed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/monaco.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi
index 400c75437978..ffb13d61ee36 100644
--- a/arch/arm64/boot/dts/qcom/monaco.dtsi
+++ b/arch/arm64/boot/dts/qcom/monaco.dtsi
@@ -4864,6 +4864,8 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 			supports-cqe;
 			dma-coherent;
 
+			qcom,ice = <&sdhc_ice>;
+
 			mmc-ddr-1_8v;
 			mmc-hs200-1_8v;
 			mmc-hs400-1_8v;
@@ -4896,6 +4898,17 @@ opp-384000000 {
 			};
 		};
 
+		sdhc_ice: crypto@87c8000 {
+			compatible = "qcom,qcs8300-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0x0 0x087c8000 0x0 0x18000>;
+			clocks = <&gcc GCC_SDCC1_ICE_CORE_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			power-domains = <&rpmhpd RPMHPD_CX>;
+		};
+
 		usb_1_hsphy: phy@8904000 {
 			compatible = "qcom,qcs8300-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";

-- 
2.34.1