Devicetree
 help / color / mirror / Atom feed
From: Loic Poulain <loic.poulain@oss.qualcomm.com>
To: Lee Jones <lee@kernel.org>, Pavel Machek <pavel@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>
Cc: linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	Loic Poulain <loic.poulain@oss.qualcomm.com>
Subject: [PATCH v4 3/4] leds: pca963x: add multicolor LED class support
Date: Wed, 08 Jul 2026 16:19:02 +0200	[thread overview]
Message-ID: <20260708-monza-leds-v4-3-a7acfc524c0b@oss.qualcomm.com> (raw)
In-Reply-To: <20260708-monza-leds-v4-0-a7acfc524c0b@oss.qualcomm.com>

Allow grouping of individual PCA963x PWM channels into a single
multicolor LED device by adding support for the LED multicolor class.

A child node with sub-children is treated as a multicolor group,
others are treated as single leds, keeping full backwards compatibility.

Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
---
 drivers/leds/Kconfig        |   1 +
 drivers/leds/leds-pca963x.c | 126 ++++++++++++++++++++++++++++++++++++++------
 2 files changed, 110 insertions(+), 17 deletions(-)

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index f4a0a3c8c8705e0f10ba26584277dbb2d5eac5b5..14df88f92b12bbe43908b67f9480cf23056e27e2 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -596,6 +596,7 @@ config LEDS_PCA963X
 	tristate "LED support for PCA963x I2C chip"
 	depends on LEDS_CLASS
 	depends on I2C
+	select LEDS_CLASS_MULTICOLOR
 	help
 	  This option enables support for LEDs connected to the PCA963x
 	  LED driver chip accessed via the I2C bus. Supported
diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
index e3a81c60ee27c96e5050a829523dfd43e1f0663f..f6f6bafcc2bd5bad51a3184c4cb08fc50693a0a5 100644
--- a/drivers/leds/leds-pca963x.c
+++ b/drivers/leds/leds-pca963x.c
@@ -27,6 +27,7 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
+#include <linux/led-class-multicolor.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/property.h>
@@ -101,8 +102,11 @@ struct pca963x;
 struct pca963x_led {
 	struct pca963x *chip;
 	struct led_classdev led_cdev;
+	struct led_classdev_mc mc_cdev;
+	struct mc_subled subleds[4];
 	int led_num; /* 0 .. 15 potentially */
 	bool blinking;
+	bool is_mc;
 	u8 gdc;
 	u8 gfrq;
 };
@@ -205,7 +209,7 @@ static int pca963x_power_state(struct pca963x_led *led)
 	unsigned long *leds_on = &led->chip->leds_on;
 	unsigned long cached_leds = *leds_on;
 
-	if (led->led_cdev.brightness)
+	if (led->is_mc ? led->mc_cdev.led_cdev.brightness : led->led_cdev.brightness)
 		set_bit(led->led_num, leds_on);
 	else
 		clear_bit(led->led_num, leds_on);
@@ -237,6 +241,28 @@ static int pca963x_led_set(struct led_classdev *led_cdev,
 	return ret;
 }
 
+static int pca963x_led_mc_set(struct led_classdev *led_cdev,
+			      enum led_brightness value)
+{
+	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
+	struct pca963x_led *led = container_of(mc_cdev, struct pca963x_led, mc_cdev);
+	unsigned int i;
+	int ret;
+
+	led_mc_calc_color_components(mc_cdev, value);
+
+	guard(mutex)(&led->chip->mutex);
+
+	for (i = 0; i < mc_cdev->num_colors; i++) {
+		led->led_num = mc_cdev->subled_info[i].channel;
+		ret = pca963x_brightness(led, mc_cdev->subled_info[i].brightness);
+		if (ret < 0)
+			return ret;
+	}
+
+	return pca963x_power_state(led);
+}
+
 static unsigned int pca963x_period_scale(struct pca963x_led *led,
 					 unsigned int val)
 {
@@ -300,6 +326,84 @@ static int pca963x_blink_set(struct led_classdev *led_cdev,
 	return 0;
 }
 
+static int pca963x_register_single_led(struct device *dev,
+					struct pca963x_led *led, u32 reg,
+					struct fwnode_handle *fwnode,
+					bool hw_blink)
+{
+	struct led_init_data init_data = {};
+	char default_label[32];
+	struct i2c_client *client = led->chip->client;
+
+	led->led_num = reg;
+	led->is_mc = false;
+	led->led_cdev.brightness_set_blocking = pca963x_led_set;
+	if (hw_blink)
+		led->led_cdev.blink_set = pca963x_blink_set;
+
+	init_data.fwnode = fwnode;
+	init_data.devicename = "pca963x";
+	snprintf(default_label, sizeof(default_label), "%d:%.2x:%u",
+		 client->adapter->nr, client->addr, reg);
+	init_data.default_label = default_label;
+
+	return devm_led_classdev_register_ext(dev, &led->led_cdev, &init_data);
+}
+
+static int pca963x_register_mc_led(struct device *dev,
+				   struct pca963x_led *led, u32 reg,
+				   struct fwnode_handle *fwnode,
+				   const struct pca963x_chipdef *chipdef)
+{
+	struct mc_subled *subleds = led->subleds;
+	unsigned int num_colors = 0;
+	struct led_init_data init_data = {};
+	char default_label[32];
+	struct i2c_client *client = led->chip->client;
+	int ret;
+
+	fwnode_for_each_child_node_scoped(fwnode, sub) {
+		u32 color, subreg;
+
+		if (num_colors >= ARRAY_SIZE(led->subleds)) {
+			dev_err(dev, "Too many sub-LEDs for node %pfw\n", fwnode);
+			return -EINVAL;
+		}
+
+		ret = fwnode_property_read_u32(sub, "reg", &subreg);
+		if (ret || subreg >= chipdef->n_leds) {
+			dev_err(dev, "Invalid 'reg' for sub-LED %pfw\n", sub);
+			return -EINVAL;
+		}
+
+		ret = fwnode_property_read_u32(sub, "color", &color);
+		if (ret) {
+			dev_err(dev, "Missing 'color' for sub-LED %pfw\n", sub);
+			return ret;
+		}
+
+		subleds[num_colors].channel = subreg;
+		subleds[num_colors].color_index = color;
+		subleds[num_colors].intensity = LED_FULL;
+		num_colors++;
+	}
+
+	led->led_num = reg;
+	led->is_mc = true;
+	led->mc_cdev.subled_info = subleds;
+	led->mc_cdev.num_colors = num_colors;
+	led->mc_cdev.led_cdev.max_brightness = LED_FULL;
+	led->mc_cdev.led_cdev.brightness_set_blocking = pca963x_led_mc_set;
+
+	init_data.fwnode = fwnode;
+	init_data.devicename = "pca963x";
+	snprintf(default_label, sizeof(default_label), "%d:%.2x:%u",
+		 client->adapter->nr, client->addr, reg);
+	init_data.default_label = default_label;
+
+	return devm_led_classdev_multicolor_register_ext(dev, &led->mc_cdev, &init_data);
+}
+
 static int pca963x_register_leds(struct i2c_client *client,
 				 struct pca963x *chip)
 {
@@ -338,9 +442,6 @@ static int pca963x_register_leds(struct i2c_client *client,
 		return ret;
 
 	device_for_each_child_node_scoped(dev, child) {
-		struct led_init_data init_data = {};
-		char default_label[32];
-
 		ret = fwnode_property_read_u32(child, "reg", &reg);
 		if (ret || reg >= chipdef->n_leds) {
 			dev_err(dev, "Invalid 'reg' property for node %pfw\n",
@@ -348,22 +449,13 @@ static int pca963x_register_leds(struct i2c_client *client,
 			return -EINVAL;
 		}
 
-		led->led_num = reg;
 		led->chip = chip;
-		led->led_cdev.brightness_set_blocking = pca963x_led_set;
-		if (hw_blink)
-			led->led_cdev.blink_set = pca963x_blink_set;
 		led->blinking = false;
 
-		init_data.fwnode = child;
-		/* for backwards compatibility */
-		init_data.devicename = "pca963x";
-		snprintf(default_label, sizeof(default_label), "%d:%.2x:%u",
-			 client->adapter->nr, client->addr, reg);
-		init_data.default_label = default_label;
-
-		ret = devm_led_classdev_register_ext(dev, &led->led_cdev,
-						     &init_data);
+		if (fwnode_get_child_node_count(child) > 0)
+			ret = pca963x_register_mc_led(dev, led, reg, child, chipdef);
+		else
+			ret = pca963x_register_single_led(dev, led, reg, child, hw_blink);
 		if (ret) {
 			dev_err(dev, "Failed to register LED for node %pfw\n",
 				child);

-- 
2.34.1


  parent reply	other threads:[~2026-07-08 14:19 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-08 14:18 [PATCH v4 0/4] leds: pca963x: Add multicolor support and enable Monza RGB LEDs Loic Poulain
2026-07-08 14:19 ` [PATCH v4 1/4] dt-bindings: leds: nxp,pca963x: fix reg maximum for pca9635 Loic Poulain
2026-07-08 14:26   ` sashiko-bot
2026-07-08 16:25   ` Conor Dooley
2026-07-08 14:19 ` [PATCH v4 2/4] dt-bindings: leds: nxp,pca963x: add multicolor LED support Loic Poulain
2026-07-08 14:27   ` sashiko-bot
2026-07-08 16:27   ` Conor Dooley
2026-07-08 14:19 ` Loic Poulain [this message]
2026-07-08 14:38   ` [PATCH v4 3/4] leds: pca963x: add multicolor LED class support sashiko-bot
2026-07-08 14:19 ` [PATCH v4 4/4] arm64: dts: monaco-arduino-monza: microcontroller LEDs Loic Poulain
2026-07-08 14:30   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260708-monza-leds-v4-3-a7acfc524c0b@oss.qualcomm.com \
    --to=loic.poulain@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=lee@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox