[PATCH RFC 1/2] dt-bindings: leds-group-multicolor: Introduce default-intensity

[Stefan Wahren <wahrenst@gmx.net>]

Currently it's not possible to specify the initial color of a LED group
during boot. So introduce a new property similar to default-brightness,
which specifies the intensity of each LED in the group.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 .../devicetree/bindings/leds/leds-group-multicolor.yaml    | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml
index 5c9cfa39396b..18b722b807ba 100644
--- a/Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml
@@ -19,6 +19,12 @@ properties:
 
   leds: true
 
+  default-intensity:
+    description:
+      Intensity to be set for each individual LED. Used only during
+      initialization. If the property is not set then max intensity is used.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
 required:
   - leds
 
@@ -56,6 +62,7 @@ examples:
         color = <LED_COLOR_ID_RGB>;
         function = LED_FUNCTION_INDICATOR;
         leds = <&led0>, <&led1>, <&led2>;
+        default-intensity = <1 0 0>;
     };
 
 ...
-- 
2.43.0