From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Guenter Roeck <linux@roeck-us.net>, Lee Jones <lee@kernel.org>,
Linus Walleij <linusw@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Peter Rosin <peda@axentia.se>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
kernel@pengutronix.de, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-gpio@vger.kernel.org, David Jander <david@protonic.nl>
Subject: [PATCH v15 0/6] mfd: Add support for NXP MC33978/MC34978 MSDI
Date: Fri, 10 Jul 2026 12:13:49 +0200 [thread overview]
Message-ID: <20260710101358.2606941-1-o.rempel@pengutronix.de> (raw)
changes v15:
- move platform part out of MFD patch
changes v7:
- drop gpiolib irq fix and make pinctrl more robust against NULL point
dereference.
This series adds support for the NXP MC33978/MC34978 Multiple Switch Detection
Interface (MSDI) via the MFD framework.
Architecture overview:
* mfd: Core driver handling 2-frame pipelined SPI, regulator sequencing, and
linear irq_domain. Harvests status bits from SPI MISO MSB.
* pinctrl: Exposes 22 physical switch inputs as standard GPIOs. Proxies IRQs to
the MFD domain.
* hwmon: Exposes thermal limits, VBATP/VDDQ voltage boundaries, and dynamic
fault alarms.
* mux: Controls the 24-to-1 AMUX routing analog signals (switch voltages,
temperature, VBATP) to an external ADC.
Initial pinctrl implementation by David Jander, reworked into this MFD
architecture.
Best regards,
Oleksij
David Jander (1):
pinctrl: add NXP MC33978/MC34978 pinctrl driver
Oleksij Rempel (5):
dt-bindings: pinctrl: add NXP MC33978/MC34978 MSDI
platform: misc: add NXP MC33978/MC34978 core driver
mfd: mc33978: Add NXP MC33978/MC34978 MSDI support
hwmon: add NXP MC33978/MC34978 driver
mux: add NXP MC33978/MC34978 AMUX driver
.../bindings/pinctrl/nxp,mc33978.yaml | 160 ++
drivers/hwmon/Kconfig | 10 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/mc33978-hwmon.c | 580 ++++++++
drivers/mfd/Kconfig | 16 +
drivers/mfd/Makefile | 2 +
drivers/mfd/mc33978.c | 195 +++
drivers/mux/Kconfig | 14 +
drivers/mux/Makefile | 2 +
drivers/mux/mc33978-mux.c | 141 ++
drivers/pinctrl/Kconfig | 16 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-mc33978.c | 1042 +++++++++++++
drivers/platform/Kconfig | 2 +
drivers/platform/Makefile | 1 +
drivers/platform/misc/Kconfig | 10 +
drivers/platform/misc/Makefile | 6 +
drivers/platform/misc/mc33978-core.c | 1285 +++++++++++++++++
include/linux/mfd/mc33978.h | 196 +++
19 files changed, 3680 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/nxp,mc33978.yaml
create mode 100644 drivers/hwmon/mc33978-hwmon.c
create mode 100644 drivers/mfd/mc33978.c
create mode 100644 drivers/mux/mc33978-mux.c
create mode 100644 drivers/pinctrl/pinctrl-mc33978.c
create mode 100644 drivers/platform/misc/Kconfig
create mode 100644 drivers/platform/misc/Makefile
create mode 100644 drivers/platform/misc/mc33978-core.c
create mode 100644 include/linux/mfd/mc33978.h
--
2.47.3
next reply other threads:[~2026-07-10 10:14 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-10 10:13 Oleksij Rempel [this message]
2026-07-10 10:13 ` [PATCH v15 1/6] dt-bindings: pinctrl: add NXP MC33978/MC34978 MSDI Oleksij Rempel
2026-07-10 10:19 ` sashiko-bot
2026-07-10 10:13 ` [PATCH v15 2/6] platform: misc: add NXP MC33978/MC34978 core driver Oleksij Rempel
2026-07-10 10:24 ` sashiko-bot
2026-07-10 10:13 ` [PATCH v15 3/6] mfd: mc33978: Add NXP MC33978/MC34978 MSDI support Oleksij Rempel
2026-07-10 10:25 ` sashiko-bot
2026-07-10 10:13 ` [PATCH v15 4/6] pinctrl: add NXP MC33978/MC34978 pinctrl driver Oleksij Rempel
2026-07-10 10:27 ` sashiko-bot
2026-07-10 15:22 ` Alvin Šipraga
2026-07-11 5:21 ` Oleksij Rempel
2026-07-10 10:13 ` [PATCH v15 5/6] hwmon: add NXP MC33978/MC34978 driver Oleksij Rempel
2026-07-10 10:23 ` sashiko-bot
2026-07-10 10:13 ` [PATCH v15 6/6] mux: add NXP MC33978/MC34978 AMUX driver Oleksij Rempel
2026-07-10 10:25 ` sashiko-bot
2026-07-10 12:53 ` Alvin Šipraga
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260710101358.2606941-1-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=conor+dt@kernel.org \
--cc=david@protonic.nl \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=peda@axentia.se \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox