[PATCH v2] dt-bindings: clock: fix bracket

[PATCH v2] dt-bindings: clock: fix bracket

[Manuel Ebner]

Add ')' and fix sentence structure.

Signed-off-by: Manuel Ebner <manuelebner@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
[v2]
 fix subject
 add reviewed-by
 .../bindings/clock/renesas,rcar-usb2-clock-sel.yaml           | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
index c84f29f1810f..a14be249fa33 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
@@ -13,8 +13,8 @@ description: |
   If you connect an external clock to the USB_EXTAL pin only, you should set
   the clock rate to "usb_extal" node only.
   If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
-  is not needed because this is default setting. (Of course, you can set the
-  clock rates to both "usb_extal" and "usb_xtal" nodes.
+  is not needed because this is default setting (Of course, you can set the
+  clock rates to both "usb_extal" and "usb_xtal" nodes).
 
   Case 1: An external clock connects to R-Car SoC
     +----------+   +--- R-Car ---------------------+
-- 
2.54.0