* [PATCH v3 1/4] dt-bindings: timer: Add the Renesas RZ/N1 timer
2026-07-17 9:55 [PATCH v3 0/4] timers: Add support for RZ/N1 SoCs timers Herve Codina (Schneider Electric)
@ 2026-07-17 9:55 ` Herve Codina (Schneider Electric)
2026-07-17 9:55 ` [PATCH v3 2/4] clocksource/drivers: Add support for the Renesas RZ/N1 timers Herve Codina (Schneider Electric)
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Herve Codina (Schneider Electric) @ 2026-07-17 9:55 UTC (permalink / raw)
To: Wolfram Sang, Herve Codina, Daniel Lezcano, Thomas Gleixner,
Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Geert Uytterhoeven, Magnus Damm
Cc: linux-renesas-soc, linux-kernel, devicetree, Pascal Eberhard,
Miquel Raynal, Thomas Petazzoni, Krzysztof Kozlowski
The Renesas RZ/N1 timer block controller is the controller in charge of
timers available in the Renesas RZ/N1 SoCs family.
This controller handles 8 timers:
- 6 16-bit timers
- 2 32-bit timers
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
.../bindings/timer/renesas,rzn1-timer.yaml | 74 +++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/renesas,rzn1-timer.yaml
diff --git a/Documentation/devicetree/bindings/timer/renesas,rzn1-timer.yaml b/Documentation/devicetree/bindings/timer/renesas,rzn1-timer.yaml
new file mode 100644
index 000000000000..f00ad941f8cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,rzn1-timer.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,rzn1-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 timers
+
+maintainers:
+ - Herve Codina <herve.codina@bootlin.com>
+
+description: |
+ The Renesas RZ/N1 SoCs timers block controller is composed of 8 independent
+ timers.
+ - 6 are 16-bit timers
+ - 2 are 32-bit timers
+
+ Each timer has its own interrupt line and can work in either one-shot or
+ periodic mode.
+
+properties:
+ compatible:
+ items:
+ - const: renesas,r9a06g032-timer # RZ/N1D
+ - const: renesas,rzn1-timer
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: APB internal bus clock
+
+ clock-names:
+ items:
+ - const: pclk
+
+ power-domains:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 8
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - power-domains
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+ timer@51001000 {
+ compatible = "renesas,r9a06g032-timer", "renesas,rzn1-timer";
+ reg = <0x51001000 0x400>;
+ clocks = <&sysctrl R9A06G032_HCLK_TIMER0>;
+ clock-names = "pclk";
+ power-domains = <&sysctrl>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ };
+...
--
2.55.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v3 2/4] clocksource/drivers: Add support for the Renesas RZ/N1 timers
2026-07-17 9:55 [PATCH v3 0/4] timers: Add support for RZ/N1 SoCs timers Herve Codina (Schneider Electric)
2026-07-17 9:55 ` [PATCH v3 1/4] dt-bindings: timer: Add the Renesas RZ/N1 timer Herve Codina (Schneider Electric)
@ 2026-07-17 9:55 ` Herve Codina (Schneider Electric)
2026-07-17 10:08 ` sashiko-bot
2026-07-17 9:55 ` [PATCH v3 3/4] ARM: dts: r9a06g032: Add support for timers Herve Codina (Schneider Electric)
2026-07-17 9:55 ` [PATCH v3 4/4] MAINTAINERS: Add the Renesas RZ/N1 timers driver entry Herve Codina (Schneider Electric)
3 siblings, 1 reply; 6+ messages in thread
From: Herve Codina (Schneider Electric) @ 2026-07-17 9:55 UTC (permalink / raw)
To: Wolfram Sang, Herve Codina, Daniel Lezcano, Thomas Gleixner,
Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Geert Uytterhoeven, Magnus Damm
Cc: linux-renesas-soc, linux-kernel, devicetree, Pascal Eberhard,
Miquel Raynal, Thomas Petazzoni
The Renesas RZ/N1 timer block controller is the controller in charge of
timers available in the Renesas RZ/N1 SoCs family.
This controller handles 8 timers:
- 6 16-bit timers
- 2 32-bit timers
Each timer has its own interrupt, its own prescaler that can be used to
divide the clock by 25 and all of them can work in either one-shot or
periodic mode.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
---
drivers/clocksource/Kconfig | 11 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-rzn1.c | 455 +++++++++++++++++++++++++++++++
3 files changed, 467 insertions(+)
create mode 100644 drivers/clocksource/timer-rzn1.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index d9c76dd443f8..da83483296d5 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -152,6 +152,17 @@ config REALTEK_OTTO_TIMER
RT8391, RTL8392, RTL8393 and RTL8396 and chips of the RTL930x series
such as RTL9301, RTL9302 or RTL9303.
+config RZN1_TIMER
+ bool "Renesas RZ/N1 Timer"
+ depends on HAS_IOMEM && COMMON_CLK
+ depends on ARCH_RZN1 || COMPILE_TEST
+ help
+ Enables support for RZ/N1 SoC timers.
+ A timers block in RZ/N1 SoCs is composed of 8 timers
+ - 6 16-bit timers
+ - 2 32-bit timers
+ Two timers blocks are available in RZ/N1 SoCs.
+
config SUN4I_TIMER
bool "Sun4i timer driver" if COMPILE_TEST
depends on HAS_IOMEM
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index b46376af6b49..464ec6690ab6 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -96,3 +96,4 @@ obj-$(CONFIG_EP93XX_TIMER) += timer-ep93xx.o
obj-$(CONFIG_RALINK_TIMER) += timer-ralink.o
obj-$(CONFIG_NXP_STM_TIMER) += timer-nxp-stm.o
obj-$(CONFIG_RTK_SYSTIMER) += timer-realtek.o
+obj-$(CONFIG_RZN1_TIMER) += timer-rzn1.o
diff --git a/drivers/clocksource/timer-rzn1.c b/drivers/clocksource/timer-rzn1.c
new file mode 100644
index 000000000000..024f01bb0227
--- /dev/null
+++ b/drivers/clocksource/timer-rzn1.c
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RZ/N1 timers driver
+ *
+ * Copyright (C) 2026 Schneider-Electric
+ *
+ * Author: Herve Codina <herve.codina@bootlin.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/cpuhotplug.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/sched_clock.h>
+
+/* Per-timer register offsets */
+#define RZN1_TIMER_LOAD_COUNT_REG 0x00
+#define RZN1_TIMER_CURRENT_COUNT_REG 0x04
+#define RZN1_TIMER_CONTROL_REG 0x08
+#define RZN1_TIMER_CONTROL_INT_UNMASK BIT(3)
+#define RZN1_TIMER_CONTROL_ENABLE BIT(2)
+#define RZN1_TIMER_CONTROL_AUTORELOAD BIT(1)
+#define RZN1_TIMER_CONTROL_PRESCALER_DIV25 BIT(0)
+#define RZN1_TIMER_CLEAR_INT_REG 0x0c
+#define RZN1_TIMER_STATUS_INT0_REG 0x10
+#define RZN1_TIMER_STATUS_INT1_REG 0x14
+
+/*
+ * 8 timers are available. Among those 8 timers, the first 6 timers are 16-bit
+ * timers and the last two ones are 32-bit timers.
+ */
+#define RZN1_TIMER_BASE_INDEX_16BIT_TIMERS 0
+#define RZN1_TIMER_NB_16BIT_TIMERS 6
+#define RZN1_TIMER_LAST_INDEX_16BIT_TIMERS (RZN1_TIMER_BASE_INDEX_16BIT_TIMERS + \
+ RZN1_TIMER_NB_16BIT_TIMERS - 1)
+
+#define RZN1_TIMER_BASE_INDEX_32BIT_TIMERS 6
+#define RZN1_TIMER_NB_32BIT_TIMERS 2
+#define RZN1_TIMER_LAST_INDEX_32BIT_TIMERS (RZN1_TIMER_BASE_INDEX_32BIT_TIMERS + \
+ RZN1_TIMER_NB_32BIT_TIMERS - 1)
+
+#define RZN1_TIMER_IS_16BIT_TIMER(_i) ((_i) < RZN1_TIMER_BASE_INDEX_32BIT_TIMERS)
+
+/* Total numbers of timers */
+#define RZN1_TIMER_NB_TIMERS (RZN1_TIMER_NB_16BIT_TIMERS + \
+ RZN1_TIMER_NB_32BIT_TIMERS)
+
+/* Offset of registers related to the timer number _i in the timers regs area */
+#define RZN1_TIMER_REGS_OFFSET(_i) (0x20 * (_i))
+
+struct rzn1_timer {
+ void __iomem *base;
+ unsigned int width;
+ unsigned long rate;
+ unsigned long hz_period;
+ struct clock_event_device ced;
+};
+
+static int rzn1_timer_config(struct rzn1_timer *timer, u32 period, bool is_periodic)
+{
+ u32 ctrl;
+
+ ctrl = readl(timer->base + RZN1_TIMER_CONTROL_REG);
+
+ /* Disable the timer */
+ writel(ctrl & ~RZN1_TIMER_CONTROL_ENABLE,
+ timer->base + RZN1_TIMER_CONTROL_REG);
+
+ /* Set the new period */
+ writel(period, timer->base + RZN1_TIMER_LOAD_COUNT_REG);
+
+ /* Prepare the timer mode */
+ if (is_periodic)
+ ctrl |= RZN1_TIMER_CONTROL_AUTORELOAD;
+ else
+ ctrl &= ~RZN1_TIMER_CONTROL_AUTORELOAD;
+
+ /*
+ * Enable the timer.
+ *
+ * This automatically resets the CURRENT_COUNT register.
+ */
+ ctrl |= RZN1_TIMER_CONTROL_ENABLE;
+ writel(ctrl, timer->base + RZN1_TIMER_CONTROL_REG);
+
+ return 0;
+}
+
+static void rzn1_timer_disable(struct rzn1_timer *timer)
+{
+ u32 ctrl;
+
+ ctrl = readl(timer->base + RZN1_TIMER_CONTROL_REG);
+ ctrl &= ~RZN1_TIMER_CONTROL_ENABLE;
+ writel(ctrl, timer->base + RZN1_TIMER_CONTROL_REG);
+}
+
+static void rzn1_timer_int_enable(struct rzn1_timer *timer)
+{
+ u32 ctrl;
+
+ ctrl = readl(timer->base + RZN1_TIMER_CONTROL_REG);
+ ctrl |= RZN1_TIMER_CONTROL_INT_UNMASK;
+ writel(ctrl, timer->base + RZN1_TIMER_CONTROL_REG);
+}
+
+static irqreturn_t rzn1_timer_interrupt(int irq, void *dev_id)
+{
+ struct rzn1_timer *timer = dev_id;
+
+ /* Ack the interrupt */
+ readl(timer->base + RZN1_TIMER_CLEAR_INT_REG);
+
+ timer->ced.event_handler(&timer->ced);
+ return IRQ_HANDLED;
+}
+
+static int rzn1_clkevt_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct rzn1_timer *timer = container_of(evt, struct rzn1_timer, ced);
+
+ return rzn1_timer_config(timer, cycles, false);
+}
+
+static int rzn1_clkevt_shutdown(struct clock_event_device *evt)
+{
+ struct rzn1_timer *timer = container_of(evt, struct rzn1_timer, ced);
+
+ rzn1_timer_disable(timer);
+ return 0;
+}
+
+static int rzn1_clkevt_set_periodic(struct clock_event_device *evt)
+{
+ struct rzn1_timer *timer = container_of(evt, struct rzn1_timer, ced);
+
+ rzn1_timer_config(timer, timer->hz_period, true);
+ return 0;
+}
+
+/*
+ * This global lock is used to prevent race conditions during global timers
+ * test and set operation in case the driver is using the async probe option.
+ */
+static DEFINE_MUTEX(rzn1_global_timers_lock);
+
+static int rzn1_timer_instance;
+
+/* scheduler and clocksource */
+static struct rzn1_timer *rzn1_sched_clock;
+
+static u64 notrace rzn1_sched_read(void)
+{
+ return readl_relaxed(rzn1_sched_clock->base + RZN1_TIMER_CURRENT_COUNT_REG);
+}
+
+static u64 rzn1_clksrc_read(struct clocksource *cs)
+{
+ return readl_relaxed(rzn1_sched_clock->base + RZN1_TIMER_CURRENT_COUNT_REG);
+}
+
+static struct clocksource rzn1_clocksource = {
+ .name = "rzn1_timer_clocksource",
+ .rating = 200,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP,
+ .read = rzn1_clksrc_read,
+};
+
+/* Timers table where 32-bit timers will be assigned per-cpu */
+static struct rzn1_timer *rzn1_tab_timers;
+
+static int rzn1_local_timer_starting_cpu(unsigned int cpu)
+{
+ struct rzn1_timer *timer;
+
+ if (cpu > RZN1_TIMER_NB_32BIT_TIMERS)
+ return -EINVAL;
+
+ timer = &rzn1_tab_timers[cpu + RZN1_TIMER_BASE_INDEX_32BIT_TIMERS];
+
+ timer->ced.cpumask = cpumask_of(cpu);
+ irq_force_affinity(timer->ced.irq, cpumask_of(cpu));
+ clockevents_config_and_register(&timer->ced, timer->rate, 1,
+ GENMASK(timer->width - 1, 0));
+
+ return 0;
+}
+
+static void rzn1_timer_init(struct rzn1_timer *timer, unsigned int index,
+ void __iomem *timers_base, unsigned long clock_rate)
+{
+ timer->base = timers_base + RZN1_TIMER_REGS_OFFSET(index);
+
+ /* Disable the timer */
+ writel(0, timer->base + RZN1_TIMER_CONTROL_REG);
+
+ /* Clear potential interrupts */
+ readl(timer->base + RZN1_TIMER_CLEAR_INT_REG);
+
+ if (RZN1_TIMER_IS_16BIT_TIMER(index)) {
+ timer->width = 16;
+ /*
+ * Enable pre-scaler for 16-bit timers.
+ *
+ * Timers are fed by a 25MHz clock. With this pre-scaler (1/25)
+ * enabled, the 16-bit timers resolution is 1 microsecond.
+ */
+ writel(RZN1_TIMER_CONTROL_PRESCALER_DIV25,
+ timer->base + RZN1_TIMER_CONTROL_REG);
+ timer->rate = clock_rate / 25;
+ } else {
+ timer->width = 32;
+ timer->rate = clock_rate;
+ }
+ timer->hz_period = DIV_ROUND_UP(timer->rate, HZ);
+}
+
+static void rzn1_timer_clkevt_init_ced(struct rzn1_timer *timer, const char *name,
+ int irq)
+{
+ timer->ced.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ timer->ced.set_next_event = rzn1_clkevt_set_next_event;
+ timer->ced.set_state_shutdown = rzn1_clkevt_shutdown;
+ timer->ced.set_state_periodic = rzn1_clkevt_set_periodic;
+ timer->ced.cpumask = cpu_possible_mask;
+
+ /*
+ * 32-bit timers are fed with a 25 MHz clock directly derived from the
+ * main PLL (1 GHz). The arch timer, ARMv7 CP15 in RZ/N1 SoCs, is fed
+ * with to a 6.25 MHz clock.
+ *
+ * The clock of the RZ/N1 timers block is a stable one and the RZ/N1
+ * timers have a higher resolution than the ARM CP15 one.
+ *
+ * Also those 32-bit RZ/N1 timers are assigned per-cpu.
+ *
+ * Use a high rating for the 32-bit RZ/N1 timers in order to have them
+ * chosen by the system.
+ */
+ timer->ced.rating = timer->width == 16 ? 200 : 460;
+ timer->ced.owner = THIS_MODULE;
+ timer->ced.name = name;
+ timer->ced.irq = irq;
+}
+
+static int rzn1_timer_setup_timers(struct platform_device *pdev,
+ struct rzn1_timer *tab_timers,
+ unsigned int first_timer_index,
+ unsigned int last_timer_index,
+ void __iomem *base, unsigned long clock_rate)
+{
+ struct device *dev = &pdev->dev;
+ struct rzn1_timer *timer;
+ unsigned int i;
+ char *name;
+ int irq;
+ int ret;
+
+ for (i = first_timer_index; i <= last_timer_index; i++) {
+ timer = &tab_timers[i];
+
+ rzn1_timer_init(timer, i, base, clock_rate);
+
+ irq = platform_get_irq(pdev, i);
+ if (irq < 0)
+ return irq;
+
+ name = devm_kasprintf(dev, GFP_KERNEL, "%s-%u", dev_name(dev), i);
+ if (!name)
+ return -ENOMEM;
+
+ rzn1_timer_clkevt_init_ced(timer, name, irq);
+
+ ret = devm_request_irq(dev, timer->ced.irq, rzn1_timer_interrupt,
+ IRQF_TIMER, timer->ced.name, timer);
+ if (ret < 0)
+ return dev_err_probe(dev, irq, "timer%u: Failed to request IRQ\n", i);
+
+ rzn1_timer_int_enable(timer);
+ }
+ return 0;
+}
+
+static void rzn1_timer_register_clkevt(struct rzn1_timer *tab_timers,
+ unsigned int first_timer_index,
+ unsigned int last_timer_index)
+{
+ struct rzn1_timer *timer;
+ unsigned int i;
+
+ for (i = first_timer_index; i <= last_timer_index; i++) {
+ timer = &tab_timers[i];
+ clockevents_config_and_register(&timer->ced, timer->rate,
+ 1, GENMASK(timer->width - 1, 0));
+ }
+}
+
+static int rzn1_timer_probe_first(struct platform_device *pdev,
+ struct rzn1_timer *tab_timers,
+ void __iomem *base, unsigned long clock_rate)
+{
+ struct device *dev = &pdev->dev;
+ struct rzn1_timer *timer;
+ int ret;
+
+ /*
+ * Probe the first instance. In that case, timers are assigned as
+ * follow:
+ * - First 16-bit timer: clocksource and sched_clock
+ * - Other 16-bit timers: clock events for all possible CPUs
+ * - 32-bit timers: clock events per CPU
+ *
+ * First step, perform all operation that could fail without calling
+ * clockevents_config_and_register(), sched_clock_register() nor
+ * cpuhp_setup_state(). Those operation don't have unregister nor
+ * teardown counterparts and so, once called, we cannot remove the
+ * related resource.
+ */
+
+ /*
+ * First step for 16-bit timers except the first one and all 32-bit
+ * timers.
+ */
+ ret = rzn1_timer_setup_timers(pdev, tab_timers,
+ RZN1_TIMER_BASE_INDEX_16BIT_TIMERS + 1,
+ RZN1_TIMER_LAST_INDEX_32BIT_TIMERS,
+ base, clock_rate);
+ if (ret)
+ return ret;
+
+ /*
+ * Second step, almost all operations that can fail have been called.
+ * Timers are ready to work. Start with the last operation that can fail,
+ * installing and invoking hotplug callbacks
+ */
+ rzn1_tab_timers = tab_timers;
+ ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+ "clockevents/rzn1/global_timer:starting",
+ rzn1_local_timer_starting_cpu, NULL);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Setup CPU hotplug state failed\n");
+
+ /*
+ * At this point, no more operations can fail. Perform remaining
+ * operations. Starting by handling the first 16-bit timer
+ */
+ timer = &tab_timers[RZN1_TIMER_BASE_INDEX_16BIT_TIMERS];
+
+ rzn1_timer_init(timer, RZN1_TIMER_BASE_INDEX_16BIT_TIMERS, base, clock_rate);
+ rzn1_timer_config(timer, GENMASK(timer->width - 1, 0), true);
+
+ rzn1_sched_clock = timer;
+
+ sched_clock_register(rzn1_sched_read, rzn1_sched_clock->width, rzn1_sched_clock->rate);
+
+ rzn1_clocksource.mask = CLOCKSOURCE_MASK(rzn1_sched_clock->width);
+ clocksource_register_hz(&rzn1_clocksource, rzn1_sched_clock->rate);
+
+ /*
+ * Register clockevents only for 16-bit timers. 32-bit timers clockevents
+ * are registered by CPU hotplug startup function set previously by the
+ * cpuhp_setup_state() call.
+ */
+ rzn1_timer_register_clkevt(tab_timers,
+ RZN1_TIMER_BASE_INDEX_16BIT_TIMERS + 1,
+ RZN1_TIMER_LAST_INDEX_16BIT_TIMERS);
+
+ return 0;
+}
+
+static int rzn1_timer_probe_other(struct platform_device *pdev,
+ struct rzn1_timer *tab_timers,
+ void __iomem *base, unsigned long clock_rate)
+{
+ int ret;
+
+ /*
+ * Probe other instance(s), i.e. not the first one. In that case,
+ * all timers are used as clock events and available for all possible
+ * CPUs
+ *
+ * First step, perform all operation that could fail without calling
+ * clockevents_config_and_register(). Unregister counterpart does not
+ * exist and so, once called, we cannot remove the related resource.
+ */
+ ret = rzn1_timer_setup_timers(pdev, tab_timers,
+ RZN1_TIMER_BASE_INDEX_16BIT_TIMERS,
+ RZN1_TIMER_LAST_INDEX_32BIT_TIMERS,
+ base, clock_rate);
+ if (ret)
+ return ret;
+
+ /*
+ * Second step, all operation that can fail have been called. We can
+ * register our timers.
+ */
+ rzn1_timer_register_clkevt(tab_timers,
+ RZN1_TIMER_BASE_INDEX_16BIT_TIMERS,
+ RZN1_TIMER_LAST_INDEX_32BIT_TIMERS);
+ return 0;
+}
+
+static int rzn1_timer_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rzn1_timer *tab_timers;
+ unsigned long clock_rate;
+ void __iomem *base;
+ struct clk *clk;
+ int ret;
+
+ tab_timers = devm_kcalloc(dev, RZN1_TIMER_NB_TIMERS, sizeof(*tab_timers),
+ GFP_KERNEL);
+ if (!tab_timers)
+ return -ENOMEM;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ clk = devm_clk_get_enabled(dev, "pclk");
+ if (IS_ERR(clk))
+ return dev_err_probe(dev, PTR_ERR(clk), "Failed to get pclk\n");
+
+ clock_rate = clk_get_rate(clk);
+
+ scoped_guard(mutex, &rzn1_global_timers_lock) {
+ ret = !rzn1_timer_instance ?
+ rzn1_timer_probe_first(pdev, tab_timers, base, clock_rate) :
+ rzn1_timer_probe_other(pdev, tab_timers, base, clock_rate);
+ if (!ret)
+ rzn1_timer_instance++;
+ }
+
+ return ret;
+}
+
+static const struct of_device_id rzn1_timer_of_match[] = {
+ { .compatible = "renesas,rzn1-timer", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver rzn1_timer_driver = {
+ .driver = {
+ .name = "rzn1_timer",
+ .of_match_table = rzn1_timer_of_match,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver_probe(rzn1_timer_driver, rzn1_timer_probe);
--
2.55.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v3 3/4] ARM: dts: r9a06g032: Add support for timers
2026-07-17 9:55 [PATCH v3 0/4] timers: Add support for RZ/N1 SoCs timers Herve Codina (Schneider Electric)
2026-07-17 9:55 ` [PATCH v3 1/4] dt-bindings: timer: Add the Renesas RZ/N1 timer Herve Codina (Schneider Electric)
2026-07-17 9:55 ` [PATCH v3 2/4] clocksource/drivers: Add support for the Renesas RZ/N1 timers Herve Codina (Schneider Electric)
@ 2026-07-17 9:55 ` Herve Codina (Schneider Electric)
2026-07-17 9:55 ` [PATCH v3 4/4] MAINTAINERS: Add the Renesas RZ/N1 timers driver entry Herve Codina (Schneider Electric)
3 siblings, 0 replies; 6+ messages in thread
From: Herve Codina (Schneider Electric) @ 2026-07-17 9:55 UTC (permalink / raw)
To: Wolfram Sang, Herve Codina, Daniel Lezcano, Thomas Gleixner,
Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Geert Uytterhoeven, Magnus Damm
Cc: linux-renesas-soc, linux-kernel, devicetree, Pascal Eberhard,
Miquel Raynal, Thomas Petazzoni
In the Renesas RZ/N1 SoCs family, two timers block are available.
Each block contains 8 timers composed of 6 16-bits timers and 2 32-bits
timers.
Each timer has its own interrupt line.
Describe those timers blocks.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/renesas/r9a06g032.dtsi | 34 ++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
index 442ea26b40f5..ba3f011e8c17 100644
--- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
@@ -722,6 +722,40 @@ gpioirqmux: interrupt-controller@51000480 {
status = "disabled";
};
+ timer0: timer@51001000 {
+ compatible = "renesas,r9a06g032-timer", "renesas,rzn1-timer";
+ reg = <0x51001000 0x400>;
+ clocks = <&sysctrl R9A06G032_HCLK_TIMER0>;
+ clock-names = "pclk";
+ power-domains = <&sysctrl>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer1: timer@51002000 {
+ compatible = "renesas,r9a06g032-timer", "renesas,rzn1-timer";
+ reg = <0x51002000 0x400>;
+ clocks = <&sysctrl R9A06G032_HCLK_TIMER1>;
+ clock-names = "pclk";
+ power-domains = <&sysctrl>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
can0: can@52104000 {
compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
reg = <0x52104000 0x800>;
--
2.55.0
^ permalink raw reply related [flat|nested] 6+ messages in thread