From: Cosmo Chou <chou.cosmo@gmail.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
joel@jms.id.au, andrew@codeconstruct.com.au
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
cosmo.chou@quantatw.com, Cosmo Chou <chou.cosmo@gmail.com>
Subject: [PATCH v2 3/4] ARM: dts: aspeed: bletchley: Add second source PCA9532 LED controllers
Date: Wed, 29 Jul 2026 19:43:11 +0800 [thread overview]
Message-ID: <20260729114312.3947300-4-chou.cosmo@gmail.com> (raw)
In-Reply-To: <20260729114312.3947300-1-chou.cosmo@gmail.com>
Add alternative PCA9532 LED controllers at address 0x66 to support boards
populated with the PCA9532 instead of the primary PCA9552 at 0x67.
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
---
.../aspeed/aspeed-bmc-facebook-bletchley.dts | 422 ++++++++++++++++++
1 file changed, 422 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
index e1fa3a18ea5c..3da1cf9bbb99 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -6,6 +6,7 @@
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/usb/pd.h>
#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/leds/leds-pca9532.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/i2c/i2c.h>
@@ -86,6 +87,66 @@ led-7 {
};
};
+ fan_gpio_leds_alt {
+ compatible = "gpio-leds";
+
+ led-0 {
+ default-state = "on";
+ gpios = <&fan_leds_alt 8 GPIO_ACTIVE_HIGH>;
+ label = "fan0_blue";
+ retain-state-shutdown;
+ };
+
+ led-1 {
+ default-state = "on";
+ gpios = <&fan_leds_alt 9 GPIO_ACTIVE_HIGH>;
+ label = "fan1_blue";
+ retain-state-shutdown;
+ };
+
+ led-2 {
+ default-state = "on";
+ gpios = <&fan_leds_alt 10 GPIO_ACTIVE_HIGH>;
+ label = "fan2_blue";
+ retain-state-shutdown;
+ };
+
+ led-3 {
+ default-state = "on";
+ gpios = <&fan_leds_alt 11 GPIO_ACTIVE_HIGH>;
+ label = "fan3_blue";
+ retain-state-shutdown;
+ };
+
+ led-4 {
+ default-state = "off";
+ gpios = <&fan_leds_alt 12 GPIO_ACTIVE_HIGH>;
+ label = "fan0_amber";
+ retain-state-shutdown;
+ };
+
+ led-5 {
+ default-state = "off";
+ gpios = <&fan_leds_alt 13 GPIO_ACTIVE_HIGH>;
+ label = "fan1_amber";
+ retain-state-shutdown;
+ };
+
+ led-6 {
+ default-state = "off";
+ gpios = <&fan_leds_alt 14 GPIO_ACTIVE_HIGH>;
+ label = "fan2_amber";
+ retain-state-shutdown;
+ };
+
+ led-7 {
+ default-state = "off";
+ gpios = <&fan_leds_alt 15 GPIO_ACTIVE_HIGH>;
+ label = "fan3_amber";
+ retain-state-shutdown;
+ };
+ };
+
front_gpio_leds {
compatible = "gpio-leds";
@@ -162,6 +223,24 @@ led-1 {
};
};
+ sled1_gpio_leds_alt {
+ compatible = "gpio-leds";
+
+ led-0 {
+ default-state = "keep";
+ gpios = <&sled1_leds_alt 0 GPIO_ACTIVE_LOW>;
+ label = "sled1_amber";
+ retain-state-shutdown;
+ };
+
+ led-1 {
+ default-state = "keep";
+ gpios = <&sled1_leds_alt 1 GPIO_ACTIVE_LOW>;
+ label = "sled1_blue";
+ retain-state-shutdown;
+ };
+ };
+
sled2_gpio_leds {
compatible = "gpio-leds";
@@ -180,6 +259,24 @@ led-1 {
};
};
+ sled2_gpio_leds_alt {
+ compatible = "gpio-leds";
+
+ led-0 {
+ default-state = "keep";
+ gpios = <&sled2_leds_alt 0 GPIO_ACTIVE_LOW>;
+ label = "sled2_amber";
+ retain-state-shutdown;
+ };
+
+ led-1 {
+ default-state = "keep";
+ gpios = <&sled2_leds_alt 1 GPIO_ACTIVE_LOW>;
+ label = "sled2_blue";
+ retain-state-shutdown;
+ };
+ };
+
sled3_gpio_leds {
compatible = "gpio-leds";
@@ -198,6 +295,24 @@ led-1 {
};
};
+ sled3_gpio_leds_alt {
+ compatible = "gpio-leds";
+
+ led-0 {
+ default-state = "keep";
+ gpios = <&sled3_leds_alt 0 GPIO_ACTIVE_LOW>;
+ label = "sled3_amber";
+ retain-state-shutdown;
+ };
+
+ led-1 {
+ default-state = "keep";
+ gpios = <&sled3_leds_alt 1 GPIO_ACTIVE_LOW>;
+ label = "sled3_blue";
+ retain-state-shutdown;
+ };
+ };
+
sled4_gpio_leds {
compatible = "gpio-leds";
@@ -216,6 +331,24 @@ led-1 {
};
};
+ sled4_gpio_leds_alt {
+ compatible = "gpio-leds";
+
+ led-0 {
+ default-state = "keep";
+ gpios = <&sled4_leds_alt 0 GPIO_ACTIVE_LOW>;
+ label = "sled4_amber";
+ retain-state-shutdown;
+ };
+
+ led-1 {
+ default-state = "keep";
+ gpios = <&sled4_leds_alt 1 GPIO_ACTIVE_LOW>;
+ label = "sled4_blue";
+ retain-state-shutdown;
+ };
+ };
+
sled5_gpio_leds {
compatible = "gpio-leds";
@@ -234,6 +367,24 @@ led-1 {
};
};
+ sled5_gpio_leds_alt {
+ compatible = "gpio-leds";
+
+ led-0 {
+ default-state = "keep";
+ gpios = <&sled5_leds_alt 0 GPIO_ACTIVE_LOW>;
+ label = "sled5_amber";
+ retain-state-shutdown;
+ };
+
+ led-1 {
+ default-state = "keep";
+ gpios = <&sled5_leds_alt 1 GPIO_ACTIVE_LOW>;
+ label = "sled5_blue";
+ retain-state-shutdown;
+ };
+ };
+
sled6_gpio_leds {
compatible = "gpio-leds";
@@ -252,6 +403,24 @@ led-1 {
};
};
+ sled6_gpio_leds_alt {
+ compatible = "gpio-leds";
+
+ led-0 {
+ default-state = "keep";
+ gpios = <&sled6_leds_alt 0 GPIO_ACTIVE_LOW>;
+ label = "sled6_amber";
+ retain-state-shutdown;
+ };
+
+ led-1 {
+ default-state = "keep";
+ gpios = <&sled6_leds_alt 1 GPIO_ACTIVE_LOW>;
+ label = "sled6_blue";
+ retain-state-shutdown;
+ };
+ };
+
spi {
compatible = "spi-gpio";
#address-cells = <1>;
@@ -430,6 +599,35 @@ eeprom@54 {
reg = <0x54>;
};
+ sled1_leds_alt: pca9532@66 {
+ compatible = "nxp,pca9532";
+ reg = <0x66>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ gpio-line-names =
+ "led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
+ "","","","",
+ "","","","",
+ "","","","";
+
+ led-0 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-1 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-2 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-3 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+ };
+
sled1_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
@@ -520,6 +718,35 @@ eeprom@54 {
reg = <0x54>;
};
+ sled2_leds_alt: pca9532@66 {
+ compatible = "nxp,pca9532";
+ reg = <0x66>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ gpio-line-names =
+ "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
+ "","","","",
+ "","","","",
+ "","","","";
+
+ led-0 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-1 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-2 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-3 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+ };
+
sled2_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
@@ -610,6 +837,35 @@ eeprom@54 {
reg = <0x54>;
};
+ sled3_leds_alt: pca9532@66 {
+ compatible = "nxp,pca9532";
+ reg = <0x66>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ gpio-line-names =
+ "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
+ "","","","",
+ "","","","",
+ "","","","";
+
+ led-0 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-1 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-2 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-3 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+ };
+
sled3_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
@@ -700,6 +956,35 @@ eeprom@54 {
reg = <0x54>;
};
+ sled4_leds_alt: pca9532@66 {
+ compatible = "nxp,pca9532";
+ reg = <0x66>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ gpio-line-names =
+ "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
+ "","","","",
+ "","","","",
+ "","","","";
+
+ led-0 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-1 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-2 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-3 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+ };
+
sled4_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
@@ -790,6 +1075,35 @@ eeprom@54 {
reg = <0x54>;
};
+ sled5_leds_alt: pca9532@66 {
+ compatible = "nxp,pca9532";
+ reg = <0x66>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ gpio-line-names =
+ "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
+ "","","","",
+ "","","","",
+ "","","","";
+
+ led-0 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-1 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-2 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-3 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+ };
+
sled5_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
@@ -880,6 +1194,35 @@ eeprom@54 {
reg = <0x54>;
};
+ sled6_leds_alt: pca9532@66 {
+ compatible = "nxp,pca9532";
+ reg = <0x66>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ gpio-line-names =
+ "led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
+ "","","","",
+ "","","","",
+ "","","","";
+
+ led-0 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-1 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-2 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-3 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+ };
+
sled6_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
@@ -993,6 +1336,85 @@ tmp421@4d {
reg = <0x4d>;
};
+ fan_leds_alt: pca9532@66 {
+ compatible = "nxp,pca9532";
+ reg = <0x66>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ gpio-line-names =
+ "presence-fan0","presence-fan1",
+ "presence-fan2","presence-fan3",
+ "power-fan0-good","power-fan1-good",
+ "power-fan2-good","power-fan3-good",
+ "","","","",
+ "","","","";
+
+ led-0 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-1 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-2 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-3 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-4 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-5 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-6 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-7 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-8 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-9 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-10 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-11 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-12 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-13 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-14 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+
+ led-15 {
+ type = <PCA9532_TYPE_GPIO>;
+ };
+ };
+
fan_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
--
2.43.0
next prev parent reply other threads:[~2026-07-29 11:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-29 11:43 [PATCH v2 0/4] ARM: dts: aspeed: bletchley: Cleanups and second source devices Cosmo Chou
2026-07-29 11:43 ` [PATCH v2 1/4] ARM: dts: aspeed: bletchley: Sort i2c device nodes by address Cosmo Chou
2026-07-29 11:43 ` [PATCH v2 2/4] ARM: dts: aspeed: bletchley: Fix style warnings Cosmo Chou
2026-07-29 11:43 ` Cosmo Chou [this message]
2026-07-29 12:08 ` [PATCH v2 3/4] ARM: dts: aspeed: bletchley: Add second source PCA9532 LED controllers sashiko-bot
2026-07-29 11:43 ` [PATCH v2 4/4] ARM: dts: aspeed: bletchley: Add second source ISL1208 RTC Cosmo Chou
2026-07-29 11:51 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260729114312.3947300-4-chou.cosmo@gmail.com \
--to=chou.cosmo@gmail.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=cosmo.chou@quantatw.com \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox