From: shengjiu.wang@oss.nxp.com
To: lgirdwood@gmail.com, broonie@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, Frank.Li@nxp.com,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, shawnguo@kernel.org,
linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, shengjiu.wang@gmail.com,
Xiubo.Lee@gmail.com, nicoleotsuka@gmail.com, perex@perex.cz,
tiwai@suse.com, linuxppc-dev@lists.ozlabs.org
Cc: Shengjiu Wang <shengjiu.wang@nxp.com>
Subject: [PATCH v3 4/5] ASoC: fsl_asrc: expose individual DAIs per conversion path
Date: Tue, 4 Aug 2026 18:02:17 +0800 [thread overview]
Message-ID: <20260804100218.49587-5-shengjiu.wang@oss.nxp.com> (raw)
In-Reply-To: <20260804100218.49587-1-shengjiu.wang@oss.nxp.com>
From: Shengjiu Wang <shengjiu.wang@nxp.com>
The i.MX ASRC hardware supports three independent conversion pairs
(A, B, C). The driver previously registered a single DAI with generic
stream names "ASRC-Playback" and "ASRC-Capture", which prevents
multiple independent conversion paths from being used simultaneously.
Replace the single fsl_asrc_dai instance with an array of three DAI
drivers to allow up to three independent conversion paths to be active
at the same time:
asrc-0 -- ASRC-Playback / ASRC-Capture (backward compatible)
asrc-1 -- ASRC1-Playback / ASRC1-Capture
asrc-2 -- ASRC2-Playback / ASRC2-Capture
asrc-0 retains the original generic stream names to preserve backward
compatibility with existing machine drivers and board configurations.
Each DAI retains the same channel, rate and format capabilities as the
original. Update the devm_snd_soc_register_component() call to register
all three DAIs.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/fsl/fsl_asrc.c | 89 +++++++++++++++++++++++++++++++---------
1 file changed, 69 insertions(+), 20 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 2755ee57c6a1..a5d6c4c1e929 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -792,27 +792,76 @@ static const struct snd_soc_dai_ops fsl_asrc_dai_ops = {
SNDRV_PCM_FMTBIT_S16_LE | \
SNDRV_PCM_FMTBIT_S24_3LE)
-static struct snd_soc_dai_driver fsl_asrc_dai = {
- .playback = {
- .stream_name = "ASRC-Playback",
- .channels_min = 1,
- .channels_max = 10,
- .rate_min = 5512,
- .rate_max = 192000,
- .rates = SNDRV_PCM_RATE_KNOT,
- .formats = FSL_ASRC_FORMATS |
- SNDRV_PCM_FMTBIT_S8,
+static struct snd_soc_dai_driver fsl_asrc_dai[] = {
+ {
+ .name = "asrc-0",
+ .playback = {
+ .stream_name = "ASRC-Playback",
+ .channels_min = 1,
+ .channels_max = 10,
+ .rate_min = 5512,
+ .rate_max = 192000,
+ .rates = SNDRV_PCM_RATE_KNOT,
+ .formats = FSL_ASRC_FORMATS |
+ SNDRV_PCM_FMTBIT_S8,
+ },
+ .capture = {
+ .stream_name = "ASRC-Capture",
+ .channels_min = 1,
+ .channels_max = 10,
+ .rate_min = 5512,
+ .rate_max = 192000,
+ .rates = SNDRV_PCM_RATE_KNOT,
+ .formats = FSL_ASRC_FORMATS,
+ },
+ .ops = &fsl_asrc_dai_ops,
+ },
+ {
+ .name = "asrc-1",
+ .playback = {
+ .stream_name = "ASRC1-Playback",
+ .channels_min = 1,
+ .channels_max = 10,
+ .rate_min = 5512,
+ .rate_max = 192000,
+ .rates = SNDRV_PCM_RATE_KNOT,
+ .formats = FSL_ASRC_FORMATS |
+ SNDRV_PCM_FMTBIT_S8,
+ },
+ .capture = {
+ .stream_name = "ASRC1-Capture",
+ .channels_min = 1,
+ .channels_max = 10,
+ .rate_min = 5512,
+ .rate_max = 192000,
+ .rates = SNDRV_PCM_RATE_KNOT,
+ .formats = FSL_ASRC_FORMATS,
+ },
+ .ops = &fsl_asrc_dai_ops,
},
- .capture = {
- .stream_name = "ASRC-Capture",
- .channels_min = 1,
- .channels_max = 10,
- .rate_min = 5512,
- .rate_max = 192000,
- .rates = SNDRV_PCM_RATE_KNOT,
- .formats = FSL_ASRC_FORMATS,
+ {
+ .name = "asrc-2",
+ .playback = {
+ .stream_name = "ASRC2-Playback",
+ .channels_min = 1,
+ .channels_max = 10,
+ .rate_min = 5512,
+ .rate_max = 192000,
+ .rates = SNDRV_PCM_RATE_KNOT,
+ .formats = FSL_ASRC_FORMATS |
+ SNDRV_PCM_FMTBIT_S8,
+ },
+ .capture = {
+ .stream_name = "ASRC2-Capture",
+ .channels_min = 1,
+ .channels_max = 10,
+ .rate_min = 5512,
+ .rate_max = 192000,
+ .rates = SNDRV_PCM_RATE_KNOT,
+ .formats = FSL_ASRC_FORMATS,
+ },
+ .ops = &fsl_asrc_dai_ops,
},
- .ops = &fsl_asrc_dai_ops,
};
static bool fsl_asrc_readable_reg(struct device *dev, unsigned int reg)
@@ -1393,7 +1442,7 @@ static int fsl_asrc_probe(struct platform_device *pdev)
goto err_pm_get_sync;
ret = devm_snd_soc_register_component(&pdev->dev, &fsl_asrc_component,
- &fsl_asrc_dai, 1);
+ fsl_asrc_dai, ARRAY_SIZE(fsl_asrc_dai));
if (ret) {
dev_err(&pdev->dev, "failed to register ASoC DAI\n");
goto err_pm_get_sync;
--
2.34.1
next prev parent reply other threads:[~2026-08-04 9:56 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-04 10:02 [PATCH v3 0/5] ASoC: fsl_asrc/fsl_easrc: expose per-pair/context DAIs and fix DMA race shengjiu.wang
2026-08-04 10:02 ` [PATCH v3 1/5] ASoC: dt-bindings: fsl,imx-asrc: update port binding to support multiple paths shengjiu.wang
2026-08-04 14:39 ` Frank Li
2026-08-05 6:57 ` Shengjiu Wang
2026-08-05 17:06 ` Frank Li
2026-08-06 5:27 ` Shengjiu Wang
2026-08-06 16:40 ` Frank Li
2026-08-04 10:02 ` [PATCH v3 2/5] ASoC: dt-bindings: fsl,easrc: add ports binding for multiple conversion paths shengjiu.wang
2026-08-04 14:40 ` Frank Li
2026-08-04 10:02 ` [PATCH v3 3/5] ASoC: fsl_asrc/fsl_easrc: move DMA params into pair/context struct shengjiu.wang
2026-08-04 10:15 ` sashiko-bot
2026-08-04 10:02 ` shengjiu.wang [this message]
2026-08-04 10:20 ` [PATCH v3 4/5] ASoC: fsl_asrc: expose individual DAIs per conversion path sashiko-bot
2026-08-04 10:02 ` [PATCH v3 5/5] ASoC: fsl_easrc: " shengjiu.wang
2026-08-04 10:12 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260804100218.49587-5-shengjiu.wang@oss.nxp.com \
--to=shengjiu.wang@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@gmail.com \
--cc=shengjiu.wang@nxp.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox