devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: shengjiu.wang@oss.nxp.com
To: lgirdwood@gmail.com, broonie@kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, Frank.Li@nxp.com,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, shawnguo@kernel.org,
	linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
	imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, shengjiu.wang@gmail.com,
	Xiubo.Lee@gmail.com, nicoleotsuka@gmail.com, perex@perex.cz,
	tiwai@suse.com, linuxppc-dev@lists.ozlabs.org
Cc: Shengjiu Wang <shengjiu.wang@nxp.com>
Subject: [PATCH v3 5/5] ASoC: fsl_easrc: expose individual DAIs per conversion path
Date: Tue,  4 Aug 2026 18:02:18 +0800	[thread overview]
Message-ID: <20260804100218.49587-6-shengjiu.wang@oss.nxp.com> (raw)
In-Reply-To: <20260804100218.49587-1-shengjiu.wang@oss.nxp.com>

From: Shengjiu Wang <shengjiu.wang@nxp.com>

The i.MX EASRC hardware supports four independent conversion contexts
(A, B, C, D). The driver previously registered a single DAI with generic
stream names "ASRC-Playback" and "ASRC-Capture", which prevents
multiple independent conversion paths from being used simultaneously.

Replace the single fsl_easrc_dai instance with an array of four DAI
drivers to allow up to four independent conversion paths to be active
at the same time:

  easrc-0 -- ASRC-Playback / ASRC-Capture (backward compatible)
  easrc-1 -- ASRC1-Playback / ASRC1-Capture
  easrc-2 -- ASRC2-Playback / ASRC2-Capture
  easrc-3 -- ASRC3-Playback / ASRC3-Capture

easrc-0 retains the original generic stream names to preserve backward
compatibility with existing machine drivers and board configurations.
Each DAI retains the same channel, rate and format capabilities as the
original, including IEC958 subframe support on the capture side. Update
the devm_snd_soc_register_component() call to register all four DAIs.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/fsl_easrc.c | 112 +++++++++++++++++++++++++++++++-------
 1 file changed, 92 insertions(+), 20 deletions(-)

diff --git a/sound/soc/fsl/fsl_easrc.c b/sound/soc/fsl/fsl_easrc.c
index f1249da0658c..17d85d484358 100644
--- a/sound/soc/fsl/fsl_easrc.c
+++ b/sound/soc/fsl/fsl_easrc.c
@@ -1589,27 +1589,99 @@ static const struct snd_soc_dai_ops fsl_easrc_dai_ops = {
 	.hw_free	= fsl_easrc_hw_free,
 };
 
-static struct snd_soc_dai_driver fsl_easrc_dai = {
-	.playback = {
-		.stream_name = "ASRC-Playback",
-		.channels_min = 1,
-		.channels_max = 32,
-		.rate_min = 8000,
-		.rate_max = 768000,
-		.rates = SNDRV_PCM_RATE_KNOT,
-		.formats = FSL_EASRC_FORMATS,
+static struct snd_soc_dai_driver fsl_easrc_dai[] = {
+	{
+		.name = "easrc-0",
+		.playback = {
+			.stream_name = "ASRC-Playback",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS,
+		},
+		.capture = {
+			.stream_name = "ASRC-Capture",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+		},
+		.ops = &fsl_easrc_dai_ops,
 	},
-	.capture = {
-		.stream_name = "ASRC-Capture",
-		.channels_min = 1,
-		.channels_max = 32,
-		.rate_min = 8000,
-		.rate_max = 768000,
-		.rates = SNDRV_PCM_RATE_KNOT,
-		.formats = FSL_EASRC_FORMATS |
-			   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+	{
+		.name = "easrc-1",
+		.playback = {
+			.stream_name = "ASRC1-Playback",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS,
+		},
+		.capture = {
+			.stream_name = "ASRC1-Capture",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+		},
+		.ops = &fsl_easrc_dai_ops,
+	},
+	{
+		.name = "easrc-2",
+		.playback = {
+			.stream_name = "ASRC2-Playback",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS,
+		},
+		.capture = {
+			.stream_name = "ASRC2-Capture",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+		},
+		.ops = &fsl_easrc_dai_ops,
+	},
+	{
+		.name = "easrc-3",
+		.playback = {
+			.stream_name = "ASRC3-Playback",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS,
+		},
+		.capture = {
+			.stream_name = "ASRC3-Capture",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+		},
+		.ops = &fsl_easrc_dai_ops,
 	},
-	.ops = &fsl_easrc_dai_ops,
 };
 
 static const struct snd_soc_component_driver fsl_easrc_component = {
@@ -2234,7 +2306,7 @@ static int fsl_easrc_probe(struct platform_device *pdev)
 	regcache_cache_only(easrc->regmap, true);
 
 	ret = devm_snd_soc_register_component(dev, &fsl_easrc_component,
-					      &fsl_easrc_dai, 1);
+					      fsl_easrc_dai, ARRAY_SIZE(fsl_easrc_dai));
 	if (ret) {
 		dev_err(dev, "failed to register ASoC DAI\n");
 		goto err_pm_disable;
-- 
2.34.1


  parent reply	other threads:[~2026-08-04  9:56 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-04 10:02 [PATCH v3 0/5] ASoC: fsl_asrc/fsl_easrc: expose per-pair/context DAIs and fix DMA race shengjiu.wang
2026-08-04 10:02 ` [PATCH v3 1/5] ASoC: dt-bindings: fsl,imx-asrc: update port binding to support multiple paths shengjiu.wang
2026-08-04 14:39   ` Frank Li
2026-08-05  6:57     ` Shengjiu Wang
2026-08-05 17:06       ` Frank Li
2026-08-06  5:27         ` Shengjiu Wang
2026-08-06 16:40           ` Frank Li
2026-08-04 10:02 ` [PATCH v3 2/5] ASoC: dt-bindings: fsl,easrc: add ports binding for multiple conversion paths shengjiu.wang
2026-08-04 14:40   ` Frank Li
2026-08-04 10:02 ` [PATCH v3 3/5] ASoC: fsl_asrc/fsl_easrc: move DMA params into pair/context struct shengjiu.wang
2026-08-04 10:15   ` sashiko-bot
2026-08-04 10:02 ` [PATCH v3 4/5] ASoC: fsl_asrc: expose individual DAIs per conversion path shengjiu.wang
2026-08-04 10:20   ` sashiko-bot
2026-08-04 10:02 ` shengjiu.wang [this message]
2026-08-04 10:12   ` [PATCH v3 5/5] ASoC: fsl_easrc: " sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260804100218.49587-6-shengjiu.wang@oss.nxp.com \
    --to=shengjiu.wang@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=perex@perex.cz \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=shengjiu.wang@gmail.com \
    --cc=shengjiu.wang@nxp.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).