Devicetree
 help / color / mirror / Atom feed
From: Janani Sunil <janani.sunil@analog.com>
To: "Nuno Sá" <nuno.sa@analog.com>,
	"Michael Hennerich" <Michael.Hennerich@analog.com>,
	"Jonathan Cameron" <jic23@kernel.org>,
	"David Lechner" <dlechner@baylibre.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Olivier Moysan" <olivier.moysan@foss.st.com>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Linus Walleij" <linusw@kernel.org>,
	"Bartosz Golaszewski" <brgl@kernel.org>,
	"Jonathan Corbet" <corbet@lwn.net>,
	"Shuah Khan" <skhan@linuxfoundation.org>,
	"Michael Walle" <mwalle@kernel.org>
Cc: linux@analog.com, linux-iio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-doc@vger.kernel.org,
	jananisunil.dev@gmail.com,
	"Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
	"Janani Sunil" <janani.sunil@analog.com>
Subject: [PATCH v2 3/7] iio: adc: adi-axi-adc: Add support for CRC
Date: Thu, 6 Aug 2026 17:41:22 +0200	[thread overview]
Message-ID: <20260806-ad7768-driver-v2-3-027ac5e2a641@analog.com> (raw)
In-Reply-To: <20260806-ad7768-driver-v2-0-027ac5e2a641@analog.com>

Add support for enabling and disabling Cyclic Redundancy Check (CRC)
processing in the AXI ADC backend. CRC provides data integrity verification
for high-speed ADC data streams, ensuring reliable data transfer between
the ADC frontend and backend processing systems.

Signed-off-by: Janani Sunil <janani.sunil@analog.com>
---
 drivers/iio/adc/adi-axi-adc.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
index 26b9c75bd4d8..a9e25e09880e 100644
--- a/drivers/iio/adc/adi-axi-adc.c
+++ b/drivers/iio/adc/adi-axi-adc.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
@@ -47,6 +48,9 @@
 #define    ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK	BIT(1)
 
 #define ADI_AXI_ADC_REG_CNTRL_3			0x004c
+/* Bit 8 is common to all AXI ADC cores; bits 7-0 are per-HDL-project. */
+#define    ADI_AXI_ADC_CNTRL_3_CRC_EN_MASK	BIT(8)
+
 #define   AXI_AD485X_CNTRL_3_OS_EN_MSK		BIT(2)
 #define   AXI_AD485X_CNTRL_3_PACKET_FORMAT_MSK	GENMASK(1, 0)
 #define   AXI_AD485X_PACKET_FORMAT_20BIT	0x0
@@ -567,6 +571,22 @@ static int axi_adc_reg_access(struct iio_backend *back, unsigned int reg,
 	return regmap_write(st->regmap, reg, writeval);
 }
 
+static int axi_adc_crc_enable(struct iio_backend *back)
+{
+	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
+
+	return regmap_set_bits(st->regmap, ADI_AXI_ADC_REG_CNTRL_3,
+			       ADI_AXI_ADC_CNTRL_3_CRC_EN_MASK);
+}
+
+static int axi_adc_crc_disable(struct iio_backend *back)
+{
+	struct adi_axi_adc_state *st = iio_backend_get_priv(back);
+
+	return regmap_clear_bits(st->regmap, ADI_AXI_ADC_REG_CNTRL_3,
+				 ADI_AXI_ADC_CNTRL_3_CRC_EN_MASK);
+}
+
 static const struct regmap_config axi_adc_regmap_config = {
 	.val_bits = 32,
 	.reg_bits = 32,
@@ -615,6 +635,8 @@ static const struct iio_backend_ops adi_axi_adc_ops = {
 	.num_lanes_set = axi_adc_num_lanes_set,
 	.debugfs_reg_access = iio_backend_debugfs_ptr(axi_adc_reg_access),
 	.debugfs_print_chan_status = iio_backend_debugfs_ptr(axi_adc_debugfs_print_chan_status),
+	.crc_enable = axi_adc_crc_enable,
+	.crc_disable = axi_adc_crc_disable,
 };
 
 static const struct iio_backend_info adi_axi_adc_generic = {
@@ -684,6 +706,10 @@ static int adi_axi_adc_probe(struct platform_device *pdev)
 	if (!st)
 		return -ENOMEM;
 
+	ret = devm_mutex_init(dev, &st->lock);
+	if (ret)
+		return ret;
+
 	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);

-- 
2.43.0


  parent reply	other threads:[~2026-08-06 15:42 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-06 15:41 [PATCH v2 0/7] iio: adc: Add AD7768/AD7768-4 ADC driver support Janani Sunil
2026-08-06 15:41 ` [PATCH v2 1/7] dt-bindings: iio: adc: Add AD7768 Janani Sunil
2026-08-06 15:41 ` [PATCH v2 2/7] iio: backend: Add support for CRC Janani Sunil
2026-08-06 15:41 ` Janani Sunil [this message]
2026-08-06 15:41 ` [PATCH v2 4/7] iio: adc: Add AD7768 IIO Driver support Janani Sunil
2026-08-07  0:28   ` Andy Shevchenko
2026-08-06 15:41 ` [PATCH v2 5/7] gpio: regmap: Add runtime PM and read_output_reg_set support Janani Sunil
2026-08-06 21:31   ` Linus Walleij
2026-08-07  0:02   ` Andy Shevchenko
2026-08-06 15:41 ` [PATCH v2 6/7] gpio: ad7768: Add AD7768 GPIO auxiliary driver Janani Sunil
2026-08-06 15:41 ` [PATCH v2 7/7] Documentation: iio: Add AD7768 Documentation Janani Sunil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260806-ad7768-driver-v2-3-027ac5e2a641@analog.com \
    --to=janani.sunil@analog.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=andy@kernel.org \
    --cc=brgl@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jananisunil.dev@gmail.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@analog.com \
    --cc=mwalle@kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=olivier.moysan@foss.st.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=skhan@linuxfoundation.org \
    --cc=u.kleine-koenig@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox