[PATCH v4 0/8] Add StarFive JHB100 syscon modules

[Changhuang Liang <changhuang.liang@starfivetech.com>]

StarFive JHB100 has many syscon modules, as listed below:
- pcieep0_ecsr_syscon	(PCIe endpoint 0 externel syscon)
- pcieep1_ecsr_syscon
- host0_syscon		(Host0 syscon)
- host1_syscon
- husb0_syscon		(Host USB 0 syscon)
- husb1_syscon
- husbd0_syscon		(Host USB device 0 syscon)
- husbd1_syscon
- husbcmn_syscon	(Host USB common syscon)
- gpu0_syscon		(GPU0 syscon)
- gpu1_syscon
- b2h_syscon		(BMC to Host syscon)
- h2b_syscon		(Host to BMC syscon)
- vout_syscon		(Video output syscon)
- pcierp_ecsr_syscon	(PCIe root port externel syscon)
- pcierp_syscon		(PCIe root port syscon)
- usb_syscon
- npu_syscon
- per0_syscon		(Peripheral 0 syscon)
- per1_syscon
- per2_syscon
- per3_syscon
- sys0_syscon		(System 0 syscon)
- sys1_syscon
- sys2_syscon
- strap_syscon
- sfc0_filter_syscon	(SFC0 filter syscon)
- sfc1_filter_syscon
- sfc2_filter_syscon

Some syscon modules contain PLL, reset, and socinfo nodes
This series will add these syscon modules, as well as the
nodes under them.

-PATCH 1:	syscon binging
-PATCH 2/3/4:	syscon sys0/per0/per1 PLL driver
-PATCH 5/6:	syscon PCIe RP reset driver
-PATCH 7:	syscon socinfo driver
-PATCH 8:	syscon device tree

This series depends on the series:
https://lore.kernel.org/all/20260807112923.191627-1-changhuang.liang@starfivetech.com/

changes since v3:

PATCH 1:
- Add a new "starfive,jhb100-sfc-filter-syscon" use for JHB100 SFC

PATCH 2:
- clk use regmap_read_poll_timeout() instead of the _atomic() variant.
- clk switch PLL ops from .enable.disable to .prepare.unprepare so the
  sleeping syscon regmap is no longer accessed under the Common Clock
  Framework spinlock.
- clk use 64-bit math and div64_ul() in jhb100_pll_rate_to_preset()
- clk use mul_u32_u32 and div64_ul() in jhb100_pll_recalc_rate()
- Replace builtin_platform_driver_probe with builtin_platform_driver
  to support deferred probing.

PATCH 5:
- Add bool active_low = data->info && data->info->active_low;
  to simplify the code

PATCH 6:
- Fix typo: discontigous ==> discontiguous
- Fix typo: JHB110 ==> JHB100
- Allow RESET_STARFIVE_JHB100_SYSCON to be compiled as a module

PATCH 7:
- check kasprintf() failure in the socinfo probe path.
- Add #define pr_fmt(fmt) "jhb100-socinfo: " fmt
- include the <linux/slab.h> and <linux/string.h> headers

PATCH 8:
- Fix sys2_syscon reg length (0x4000 - 0x2000); it overlapped
  strap_syscon.
- Add sfc0/1/2_filter_syscon nodes.

v3: https://lore.kernel.org/all/20260521012932.24163-1-changhuang.liang@starfivetech.com/
v2: https://lore.kernel.org/all/20260512083521.3448-1-changhuang.liang@starfivetech.com/
V1: https://lore.kernel.org/all/20260403054945.467700-1-changhuang.liang@starfivetech.com/


Changhuang Liang (8):
  dt-bindings: soc: starfive: Add StarFive JHB100 syscon modules
  clk: starfive: Add system-0 domain PLL clock driver
  clk: starfive: Add peripheral-0 domain PLL clock driver
  clk: starfive: Add Peripheral-1 domain PLL clock driver
  reset: starfive: Introduce active_low
  reset: starfive: Add syscon reset driver support
  soc: starfive: Add socinfo driver for JHB100 SoC
  riscv: dts: starfive: jhb100: Add syscon nodes

 .../soc/starfive/starfive,jhb100-syscon.yaml  | 115 ++++
 MAINTAINERS                                   |  11 +
 arch/riscv/boot/dts/starfive/jhb100.dtsi      | 193 +++++-
 drivers/clk/starfive/Kconfig                  |   8 +
 drivers/clk/starfive/Makefile                 |   1 +
 .../clk/starfive/clk-starfive-jhb100-pll.c    | 593 ++++++++++++++++++
 drivers/reset/starfive/Kconfig                |   9 +
 drivers/reset/starfive/Makefile               |   1 +
 .../reset/starfive/reset-starfive-common.c    |   6 +-
 .../reset/starfive/reset-starfive-common.h    |   6 +
 .../starfive/reset-starfive-jhb100-syscon.c   |  62 ++
 drivers/soc/Kconfig                           |   1 +
 drivers/soc/Makefile                          |   1 +
 drivers/soc/starfive/Kconfig                  |   6 +
 drivers/soc/starfive/Makefile                 |   2 +
 drivers/soc/starfive/socinfo/Kconfig          |  11 +
 drivers/soc/starfive/socinfo/Makefile         |   2 +
 drivers/soc/starfive/socinfo/jhb100-socinfo.c |  90 +++
 .../dt-bindings/clock/starfive,jhb100-crg.h   |  12 +
 .../dt-bindings/reset/starfive,jhb100-crg.h   |   3 +
 20 files changed, 1098 insertions(+), 35 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jhb100-syscon.yaml
 create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-pll.c
 create mode 100644 drivers/reset/starfive/reset-starfive-jhb100-syscon.c
 create mode 100644 drivers/soc/starfive/Kconfig
 create mode 100644 drivers/soc/starfive/Makefile
 create mode 100644 drivers/soc/starfive/socinfo/Kconfig
 create mode 100644 drivers/soc/starfive/socinfo/Makefile
 create mode 100644 drivers/soc/starfive/socinfo/jhb100-socinfo.c

--
2.25.1