From: Mehmet Fide <mehmet.fide@gmail.com>
To: Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>
Cc: Frank Li <Frank.Li@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Stefan Agner <stefan@agner.ch>,
Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Francesco Dolcini <francesco@dolcini.it>,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Mehmet Fide <mehmet.fide@screeningeagle.com>
Subject: [PATCH v3 0/4] ARM: dts: vf: Iris carrier board for the Colibri VF50 and VF61
Date: Thu, 13 Aug 2026 16:05:56 +0200 [thread overview]
Message-ID: <20260813140600.1824949-1-mehmet.fide@gmail.com> (raw)
From: Mehmet Fide <mehmet.fide@screeningeagle.com>
This adds a device tree for the Toradex Iris carrier board carrying the
Vybrid Colibri modules, plus two small preparatory patches for the
module-level dtsi that the i.MX Colibri variants already had.
Everything was tested on a Colibri VF50 on an Iris V1.1 running 6.18:
Ethernet, USB host and OTG, all three UARTs, i2c with the carrier RTC,
SPI, the microSD slot and the RS232 transceiver hogs.
Changes in v3, following Krzysztof's review:
- fold the Iris compatibles into the existing -on-eval enum entries
instead of adding standalone entries
- use hyphens in the newly introduced compatibles
(toradex,vf500-colibri-vf50-on-iris, toradex,vf610-colibri-vf61-on-iris)
- drop the fixed 5V regulator that only fed the VBUS regulator
- sent as a fresh thread instead of in reply to v2
Changes in v2:
- add the dt-bindings patch for the new compatibles
- describe the USB host VBUS regulator instead of hogging USBH_PEN
Mehmet Fide (4):
ARM: dts: vf-colibri: apply the EXT_IO pin group
ARM: dts: vf-colibri: name the SODIMM gpio lines
dt-bindings: arm: fsl: add the Colibri VF50 and VF61 on Iris
ARM: dts: vf: add Iris carrier board support for Colibri VF50 and VF61
.../devicetree/bindings/arm/fsl.yaml | 12 +-
arch/arm/boot/dts/nxp/vf/Makefile | 2 +
arch/arm/boot/dts/nxp/vf/vf-colibri-iris.dtsi | 117 ++++++++++++++
arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi | 153 ++++++++++++++++++
.../boot/dts/nxp/vf/vf500-colibri-iris.dts | 14 ++
.../boot/dts/nxp/vf/vf610-colibri-iris.dts | 14 ++
6 files changed, 308 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/nxp/vf/vf-colibri-iris.dtsi
create mode 100644 arch/arm/boot/dts/nxp/vf/vf500-colibri-iris.dts
create mode 100644 arch/arm/boot/dts/nxp/vf/vf610-colibri-iris.dts
base-commit: 3d6d817622b0a9721e3cc404df3469171582be13
--
2.54.0
next reply other threads:[~2026-08-13 14:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-13 14:05 Mehmet Fide [this message]
2026-08-13 14:05 ` [PATCH v3 1/4] ARM: dts: vf-colibri: apply the EXT_IO pin group Mehmet Fide
2026-08-13 14:05 ` [PATCH v3 2/4] ARM: dts: vf-colibri: name the SODIMM gpio lines Mehmet Fide
2026-08-13 15:20 ` Frank Li
2026-08-13 14:05 ` [PATCH v3 3/4] dt-bindings: arm: fsl: add the Colibri VF50 and VF61 on Iris Mehmet Fide
2026-08-13 14:13 ` sashiko-bot
2026-08-13 14:06 ` [PATCH v3 4/4] ARM: dts: vf: add Iris carrier board support for Colibri VF50 and VF61 Mehmet Fide
2026-08-13 14:16 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260813140600.1824949-1-mehmet.fide@gmail.com \
--to=mehmet.fide@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=francesco@dolcini.it \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mehmet.fide@screeningeagle.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox