From: Louis Adamian <adamianlouis@gmail.com>
To: "Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Louis Adamian" <adamianlouis@gmail.com>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/5] dt-bindings: iio: pressure: Add MS5637
Date: Thu, 20 Aug 2026 10:12:18 -0400 [thread overview]
Message-ID: <20260820141224.23730-4-adamianlouis@gmail.com> (raw)
In-Reply-To: <20260820141224.23730-1-adamianlouis@gmail.com>
Create meas,ms5637 devicetree binding and move existing devices from
trivial-devices.yaml. Explicit compatible strings are added for the
different sub-variants because each requires different constants for the
second-order temperature compensation formulas. Previously, the driver
exposed the generic compatibles for the ms5637, MS5803, MS5805
and MS5837 families and applied the MS5637-02BA compensation to all of
them. To preserve the DT ABI the existing compatibles are retained and
mapped to the -02BA variant of each family (ms5637-02ba, ms5803-02ba,
ms5837-02ba).
Signed-off-by: Louis Adamian <adamianlouis@gmail.com>
---
.../bindings/iio/pressure/meas,ms5637.yaml | 93 +++++++++++++++++++
.../devicetree/bindings/trivial-devices.yaml | 10 --
2 files changed, 93 insertions(+), 10 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/pressure/meas,ms5637.yaml
diff --git a/Documentation/devicetree/bindings/iio/pressure/meas,ms5637.yaml b/Documentation/devicetree/bindings/iio/pressure/meas,ms5637.yaml
new file mode 100644
index 000000000000..befd81d1907b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/meas,ms5637.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/meas,ms5637.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Measurement Specialties ms5637 and similar pressure sensors
+
+maintainers:
+ - Louis Adamian <adamianlouis@gmail.com>
+
+description:
+ Measurement Specialties pressure and temperature sensors. The MS5803
+ family supports both I2C and SPI interfaces. All other variants are I2C only.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - meas,ms5637-02ba
+ - meas,ms5637-30ba
+ - meas,ms5803-01ba
+ - meas,ms5803-02ba
+ - meas,ms5803-05ba
+ - meas,ms5803-14ba
+ - meas,ms5803-30ba
+ - meas,ms5805
+ - meas,ms5837-02ba
+ - meas,ms5837-30ba
+ - meas,ms8607-temppressure
+ # These generic compatible strings do not identify the sub-variants of
+ # the part. They are retained so that existing device trees continue
+ # to bind, and each is treated as the -02BA variant of its family.
+ - enum:
+ - meas,ms5637
+ - meas,ms5803
+ - meas,ms5837
+ deprecated: true
+
+ reg:
+ maxItems: 1
+
+ vdd-supply:
+ description: Regulator that provides power to the sensor
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - meas,ms5803
+ - meas,ms5803-01ba
+ - meas,ms5803-02ba
+ - meas,ms5803-05ba
+ - meas,ms5803-14ba
+ - meas,ms5803-30ba
+ then:
+ $ref: /schemas/spi/spi-peripheral-props.yaml#
+ properties:
+ spi-max-frequency:
+ maximum: 20000000
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pressure@76 {
+ compatible = "meas,ms5637-02ba";
+ reg = <0x76>;
+ vdd-supply = <&vcc_3v3>;
+ };
+ };
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pressure@0 {
+ compatible = "meas,ms5803-14ba";
+ reg = <0>;
+ vdd-supply = <&vcc_3v3>;
+ spi-max-frequency = <20000000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 435c4baab436..2671040e8802 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -240,18 +240,8 @@ properties:
- meas,htu21
# Measurement Specialities I2C temperature and humidity sensor
- meas,htu31
- # Measurement Specialities I2C pressure and temperature sensor
- - meas,ms5637
- # Measurement Specialities I2C pressure and temperature sensor
- - meas,ms5803
- # Measurement Specialities I2C pressure and temperature sensor
- - meas,ms5805
- # Measurement Specialities I2C pressure and temperature sensor
- - meas,ms5837
# Measurement Specialities temp and humidity part of ms8607 device
- meas,ms8607-humidity
- # Measurement Specialities temp and pressure part of ms8607 device
- - meas,ms8607-temppressure
# Measurement Specialties temperature sensor
- meas,tsys01
# MEMSIC magnetometer
--
2.55.0
next parent reply other threads:[~2026-08-20 14:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260820141224.23730-1-adamianlouis@gmail.com>
2026-08-20 14:12 ` Louis Adamian [this message]
2026-08-20 14:21 ` [PATCH v3 3/5] dt-bindings: iio: pressure: Add MS5637 sashiko-bot
2026-08-20 18:13 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260820141224.23730-4-adamianlouis@gmail.com \
--to=adamianlouis@gmail.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).