From: Janani Sunil <janani.sunil@analog.com>
To: "Nuno Sá" <nuno.sa@analog.com>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Olivier Moysan" <olivier.moysan@foss.st.com>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Linus Walleij" <linusw@kernel.org>,
"Bartosz Golaszewski" <brgl@kernel.org>,
"Jonathan Corbet" <corbet@lwn.net>,
"Shuah Khan" <skhan@linuxfoundation.org>,
"Michael Walle" <mwalle@kernel.org>
Cc: linux@analog.com, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-doc@vger.kernel.org,
jananisunil.dev@gmail.com,
"Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
"Janani Sunil" <janani.sunil@analog.com>
Subject: [PATCH v4 07/14] iio: adc: ad7768: Add calibration controls
Date: Fri, 21 Aug 2026 16:07:00 +0200 [thread overview]
Message-ID: <20260821-ad7768-driver-v4-7-bb8fbd06d4eb@analog.com> (raw)
In-Reply-To: <20260821-ad7768-driver-v4-0-bb8fbd06d4eb@analog.com>
Expose the per-channel offset and gain calibration registers through the
IIO calibbias and calibscale attributes.
Signed-off-by: Janani Sunil <janani.sunil@analog.com>
---
drivers/iio/adc/ad7768.c | 119 ++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 108 insertions(+), 11 deletions(-)
diff --git a/drivers/iio/adc/ad7768.c b/drivers/iio/adc/ad7768.c
index 08d8e97d58fc..289f3fa3142e 100644
--- a/drivers/iio/adc/ad7768.c
+++ b/drivers/iio/adc/ad7768.c
@@ -25,6 +25,7 @@
#include <linux/reset.h>
#include <linux/spi/spi.h>
#include <linux/types.h>
+#include <linux/unaligned.h>
#include <linux/units.h>
#include <linux/iio/backend.h>
@@ -116,6 +117,7 @@
#define MAX_FREQ_PER_MODE 6
#define AD7768_MAX_CHANNEL 8
#define AD7768_NUM_CHANNEL_MODES 2
+#define AD7768_CALIB_REG_MSK GENMASK(23, 0)
#define AD7768_WIDEBAND_SETTLING_SAMPLES 68
#define AD7768_SINC5_SETTLING_SAMPLES 7
@@ -236,6 +238,18 @@ static u8 ad7768_all_standby_mask(const struct ad7768_state *st)
return GENMASK(st->chip_info->num_channels - 1, 0);
}
+static unsigned int ad7768_offset_reg(const struct ad7768_state *st,
+ unsigned int ch)
+{
+ return AD7768_REG_OFFSET(st->chip_info->chan_map[ch]);
+}
+
+static unsigned int ad7768_gain_reg(const struct ad7768_state *st,
+ unsigned int ch)
+{
+ return AD7768_REG_GAIN(st->chip_info->chan_map[ch]);
+}
+
static u8 ad7768_precharge_buf1_mask(const struct ad7768_state *st, u16 val)
{
return val & GENMASK(st->chip_info->prebuf_split - 1, 0);
@@ -355,6 +369,48 @@ static const struct regmap_config ad7768_4_regmap_config = {
.readable_reg = ad7768_4_readable_reg,
};
+static unsigned int ad7768_get_calib_reg_base(struct ad7768_state *st,
+ const struct iio_chan_spec *chan,
+ bool is_gain)
+{
+ if (is_gain)
+ return ad7768_gain_reg(st, chan->address);
+
+ return ad7768_offset_reg(st, chan->address);
+}
+
+static int ad7768_read_calib_value(struct ad7768_state *st,
+ unsigned int base_reg, unsigned int *val)
+{
+ u8 data[3];
+ int ret;
+
+ guard(mutex)(&st->lock);
+
+ ret = regmap_bulk_read(st->regmap, base_reg, data, ARRAY_SIZE(data));
+ if (ret)
+ return ret;
+
+ *val = get_unaligned_be24(data);
+
+ return 0;
+}
+
+static int ad7768_write_calib_value(struct ad7768_state *st,
+ unsigned int base_reg, unsigned int val)
+{
+ u8 data[3];
+
+ if (val > AD7768_CALIB_REG_MSK)
+ return -EINVAL;
+
+ put_unaligned_be24(val, data);
+
+ guard(mutex)(&st->lock);
+
+ return regmap_bulk_write(st->regmap, base_reg, data, ARRAY_SIZE(data));
+}
+
static int ad7768_reg_access(struct iio_dev *indio_dev,
unsigned int reg,
unsigned int writeval,
@@ -701,6 +757,8 @@ static int ad7768_read_raw(struct iio_dev *indio_dev,
int *val, int *val2, long info)
{
struct ad7768_state *st = iio_priv(indio_dev);
+ unsigned int base_reg;
+ unsigned int calib;
int ret;
PM_RUNTIME_ACQUIRE_AUTOSUSPEND(regmap_get_device(st->regmap), pm);
@@ -708,22 +766,44 @@ static int ad7768_read_raw(struct iio_dev *indio_dev,
if (ret)
return ret;
- if (info != IIO_CHAN_INFO_SAMP_FREQ)
- return -EINVAL;
+ switch (info) {
+ case IIO_CHAN_INFO_SAMP_FREQ: {
+ guard(mutex)(&st->lock);
+ *val = st->ch_freq[chan->channel];
+ return IIO_VAL_INT;
+ }
+ case IIO_CHAN_INFO_CALIBBIAS:
+ base_reg = ad7768_get_calib_reg_base(st, chan, false);
+ ret = ad7768_read_calib_value(st, base_reg, &calib);
+ if (ret)
+ return ret;
- guard(mutex)(&st->lock);
- *val = st->ch_freq[chan->channel];
+ *val = calib;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_CALIBSCALE:
+ base_reg = ad7768_get_calib_reg_base(st, chan, true);
+ ret = ad7768_read_calib_value(st, base_reg, &calib);
+ if (ret)
+ return ret;
- return IIO_VAL_INT;
+ *val = calib;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
}
static int ad7768_write_raw_get_fmt(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, long info)
{
- if (info == IIO_CHAN_INFO_SAMP_FREQ)
+ switch (info) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ case IIO_CHAN_INFO_CALIBBIAS:
+ case IIO_CHAN_INFO_CALIBSCALE:
return IIO_VAL_INT;
-
- return -EINVAL;
+ default:
+ return -EINVAL;
+ }
}
static int ad7768_write_raw(struct iio_dev *indio_dev,
@@ -731,6 +811,7 @@ static int ad7768_write_raw(struct iio_dev *indio_dev,
int val, int val2, long info)
{
struct ad7768_state *st = iio_priv(indio_dev);
+ unsigned int base_reg;
int ret;
IIO_DEV_ACQUIRE_DIRECT_MODE(indio_dev, claim);
@@ -742,10 +823,24 @@ static int ad7768_write_raw(struct iio_dev *indio_dev,
if (ret)
return ret;
- if (info == IIO_CHAN_INFO_SAMP_FREQ)
+ switch (info) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
return ad7768_set_sampling_freq(indio_dev, val, chan->channel);
+ case IIO_CHAN_INFO_CALIBBIAS:
+ if (val < 0 || val > AD7768_CALIB_REG_MSK)
+ return -EINVAL;
- return -EINVAL;
+ base_reg = ad7768_get_calib_reg_base(st, chan, false);
+ return ad7768_write_calib_value(st, base_reg, val);
+ case IIO_CHAN_INFO_CALIBSCALE:
+ if (val < 0 || val > AD7768_CALIB_REG_MSK)
+ return -EINVAL;
+
+ base_reg = ad7768_get_calib_reg_base(st, chan, true);
+ return ad7768_write_calib_value(st, base_reg, val);
+ default:
+ return -EINVAL;
+ }
}
static int ad7768_read_avail(struct iio_dev *indio_dev,
@@ -1036,7 +1131,9 @@ static int ad7768_parse_config(struct iio_dev *indio_dev,
chan[chan_idx] = (struct iio_chan_spec) {
.type = IIO_VOLTAGE,
- .info_mask_separate = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .info_mask_separate = BIT(IIO_CHAN_INFO_CALIBBIAS) |
+ BIT(IIO_CHAN_INFO_CALIBSCALE) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ),
.info_mask_separate_available =
BIT(IIO_CHAN_INFO_SAMP_FREQ),
.indexed = 1,
--
2.43.0
next prev parent reply other threads:[~2026-08-21 14:08 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-21 14:06 [PATCH v4 00/14] iio: adc: Add AD7768/AD7768-4 ADC driver support Janani Sunil
2026-08-21 14:06 ` [PATCH v4 01/14] iio: adc: adi-axi-adc: Initialize state mutex Janani Sunil
2026-08-21 14:06 ` [PATCH v4 02/14] dt-bindings: iio: adc: Add AD7768 Janani Sunil
2026-08-21 15:57 ` David Lechner
2026-08-21 14:06 ` [PATCH v4 03/14] iio: backend: Add support for CRC Janani Sunil
2026-08-21 16:02 ` David Lechner
2026-08-21 14:06 ` [PATCH v4 04/14] iio: adc: adi-axi-adc: " Janani Sunil
2026-08-21 16:03 ` David Lechner
2026-08-21 14:06 ` [PATCH v4 05/14] iio: adc: Add AD7768 and AD7768-4 core support Janani Sunil
2026-08-21 14:06 ` [PATCH v4 06/14] iio: adc: ad7768: Add configurable sampling modes Janani Sunil
2026-08-21 14:07 ` Janani Sunil [this message]
2026-08-21 14:07 ` [PATCH v4 08/14] iio: adc: ad7768: Add per-channel conversion delay Janani Sunil
2026-08-21 14:07 ` [PATCH v4 09/14] iio: adc: ad7768: Add VCM regulator support Janani Sunil
2026-08-21 14:07 ` [PATCH v4 10/14] iio: adc: ad7768: Register GPIO auxiliary device Janani Sunil
2026-08-21 14:07 ` [PATCH v4 11/14] gpio: regmap: Use regmap_test_bits() for single bit reads Janani Sunil
2026-08-21 14:07 ` [PATCH v4 12/14] gpio: regmap: Add optional runtime PM support Janani Sunil
2026-08-21 14:07 ` [PATCH v4 13/14] gpio: ad7768: Add AD7768 GPIO auxiliary driver Janani Sunil
2026-08-21 14:07 ` [PATCH v4 14/14] Documentation: iio: Add AD7768 Documentation Janani Sunil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260821-ad7768-driver-v4-7-bb8fbd06d4eb@analog.com \
--to=janani.sunil@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=andy@kernel.org \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jananisunil.dev@gmail.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@analog.com \
--cc=mwalle@kernel.org \
--cc=nuno.sa@analog.com \
--cc=olivier.moysan@foss.st.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=u.kleine-koenig@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox