[PATCH v3 0/4] iio: accel: adxl367: add INT2 interrupt pin support

[Antoniu Miclaus <antoniu.miclaus@analog.com>]

The ADXL367 exposes two independent interrupt output pins, INT1 and INT2,
each with its own event mapping register. The driver has always hardcoded
INT1, so a board that routes only INT2 to the host never receives
interrupts. This series lets the driver pick the interrupt map register
based on the interrupt-names device tree property.

v3 addresses review feedback on the driver patch: the interrupt number
returned by fwnode_irq_get_byname() is now used for the request, so the
requested line always matches the routed INTMAP register even if the
interrupts are listed in an unexpected order. A precursor patch converts
the existing regmap_update_bits(..., en ? mask : 0) helpers to
regmap_assign_bits() as suggested during review.

Changes in v3:
- New precursor patch converting the boolean regmap_update_bits() helpers
  to regmap_assign_bits().
- Use the fwnode_irq_get_byname() interrupt number for
  devm_request_threaded_irq() in the INT2 patch.
- Rebased on the latest togreg/testing.

Antoniu Miclaus (4):
  dt-bindings: iio: update unreachable maintainer entries
  dt-bindings: iio: accel: adi,adxl367: add interrupt-names
  iio: accel: adxl367: use regmap_assign_bits()
  iio: accel: adxl367: add support for INT2 interrupt pin

 .../bindings/iio/accel/adi,adxl367.yaml       | 13 ++++-
 .../bindings/iio/adc/adi,ad4130.yaml          |  3 +-
 .../bindings/iio/addac/adi,ad74115.yaml       |  3 +-
 .../bindings/iio/addac/adi,ad74413r.yaml      |  3 +-
 MAINTAINERS                                   |  4 ++
 drivers/iio/accel/adxl367.c                   | 47 +++++++++++++++----
 6 files changed, 60 insertions(+), 13 deletions(-)


base-commit: 350d1fb9204b13c5f95e511e98b8bcb47574d425
-- 
2.43.0