Devicetree
 help / color / mirror / Atom feed
From: Marek Vasut <marek.vasut+renesas@mailbox.org>
To: linux-pci@vger.kernel.org
Cc: "Marek Vasut" <marek.vasut+renesas@mailbox.org>,
	"Geert Uytterhoeven" <geert+renesas@glider.be>,
	"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Koichiro Den" <den@valinux.co.jp>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Magnus Damm" <magnus.damm@gmail.com>,
	"Manivannan Sadhasivam" <mani@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org
Subject: [PATCH v3] PCI: rcar-gen4: Add missing PM ops
Date: Mon,  7 Sep 2026 18:35:22 +0200	[thread overview]
Message-ID: <20260907163554.725127-1-marek.vasut+renesas@mailbox.org> (raw)

The R-Car Gen4 PCIe controller is part of a power domain. On R-Car S4
and V4H, this is an always-on power domain which is not shut down in
suspend. On R-Car V4M, this is a dedicated A2PCIPHY power domain,
which is shut down during suspend, and the controller loses state,
which prevents the PCIe from working after resume.

Fix this by adding generic suspend/resume noirq ops for the controller,
which tear the link down on suspend, and restart it on resume. Use the
same PM ops on all of R-Car Gen4 to gracefully suspend and resume the
PCIe link on V4H and S4 too.

Test case which demonstrates the problem on R-Car V4M:
"
$ hexdump -vC /sys/bus/pci/devices/0000:00:00.0/config > /tmp/pre
$ echo s2idle > /sys/power/mem_sleep
$ echo platform > /sys/power/pm_test
$ echo mem > /sys/power/state
$ hexdump -vC /sys/bus/pci/devices/0000:00:00.0/config > /tmp/post
$ diff -Naru /tmp/pre /tmp/post
...
-00000000  12 19 32 00 07 05 10 00  00 00 04 06 00 00 01 00
+00000000  12 19 32 00 07 05 10 00  00 00 00 ff 00 00 80 00
                                          ^^^^^
                                    Class 0604->00ff
"

Fixes: 0d0c551011df ("PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
---
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Koichiro Den <den@valinux.co.jp>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
---
V2: - Add TB from Geert for RC mode
    - Use pm_sleep_ptr()
    - Call HOST suspend/resume ops only in case the controller is in RC mode
V3: - Add RB from Geert
    - Make rcar_gen4_pcie_pm_ops() static
    - Pull the mode from driver data
---
NOTE: Depends on series
      https://lore.kernel.org/linux-pci/20260903205153.283553-1-marek.vasut+renesas@mailbox.org/
---
 drivers/pci/controller/dwc/pcie-rcar-gen4.c | 25 +++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.c b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
index 5690dc32f47e0..8b6a6cab1b83e 100644
--- a/drivers/pci/controller/dwc/pcie-rcar-gen4.c
+++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
@@ -909,6 +909,26 @@ static int rcar_gen4_pcie_ltssm_control(struct rcar_gen4_pcie *rcar, bool enable
 	return 0;
 }
 
+static int rcar_gen4_pcie_suspend_noirq(struct device *dev)
+{
+	struct rcar_gen4_pcie *rcar = dev_get_drvdata(dev);
+
+	if (rcar->drvdata->mode != DW_PCIE_RC_TYPE)
+		return 0;
+
+	return dw_pcie_suspend_noirq(&rcar->dw);
+}
+
+static int rcar_gen4_pcie_resume_noirq(struct device *dev)
+{
+	struct rcar_gen4_pcie *rcar = dev_get_drvdata(dev);
+
+	if (rcar->drvdata->mode != DW_PCIE_RC_TYPE)
+		return 0;
+
+	return dw_pcie_resume_noirq(&rcar->dw);
+}
+
 static struct rcar_gen4_pcie_drvdata drvdata_r8a779f0_pcie = {
 	.ltssm_control = r8a779f0_pcie_ltssm_control,
 	.mode = DW_PCIE_RC_TYPE,
@@ -952,10 +972,15 @@ static const struct of_device_id rcar_gen4_pcie_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, rcar_gen4_pcie_of_match);
 
+static DEFINE_NOIRQ_DEV_PM_OPS(rcar_gen4_pcie_pm_ops,
+			       rcar_gen4_pcie_suspend_noirq,
+			       rcar_gen4_pcie_resume_noirq);
+
 static struct platform_driver rcar_gen4_pcie_driver = {
 	.driver = {
 		.name = "pcie-rcar-gen4",
 		.of_match_table = rcar_gen4_pcie_of_match,
+		.pm = pm_sleep_ptr(&rcar_gen4_pcie_pm_ops),
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
 	.probe = rcar_gen4_pcie_probe,
-- 
2.53.0


             reply	other threads:[~2026-09-07 16:36 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-07 16:35 Marek Vasut [this message]
2026-09-07 16:49 ` [PATCH v3] PCI: rcar-gen4: Add missing PM ops sashiko-bot
2026-09-08  1:05 ` Koichiro Den
2026-09-08 16:29   ` Marek Vasut
2026-09-09  2:17     ` Koichiro Den
2026-09-09  2:22       ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260907163554.725127-1-marek.vasut+renesas@mailbox.org \
    --to=marek.vasut+renesas@mailbox.org \
    --cc=bhelgaas@google.com \
    --cc=conor+dt@kernel.org \
    --cc=den@valinux.co.jp \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=krzk+dt@kernel.org \
    --cc=kwilczynski@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mani@kernel.org \
    --cc=robh@kernel.org \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox