Devicetree
 help / color / mirror / Atom feed
From: Sergey Lebedev <lsa.uz@pm.me>
To: Sakari Ailus <sakari.ailus@linux.intel.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Andre Gilerson <andre.gilerson@gmail.com>,
	Dan Scally <dan.scally@ideasonboard.com>
Cc: Hans de Goede <hansg@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	German <germanpapulindez@gmail.com>,
	linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/3] dt-bindings: media: Add Sony IMX681
Date: Wed, 09 Sep 2026 20:37:30 +0000	[thread overview]
Message-ID: <20260909203717.90605-2-lsa.uz@pm.me> (raw)
In-Reply-To: <20260909203717.90605-1-lsa.uz@pm.me>

The Sony IMX681 is a CMOS image sensor used as the user-facing camera on
several Microsoft Surface devices. It operates from analog 2.8 V, digital
1.05 V and interface 1.8 V supplies, is programmable over I2C, and outputs
10-bit Bayer data over a two-lane MIPI CSI-2 D-PHY interface.

Signed-off-by: Sergey Lebedev <lsa.uz@pm.me>
---
 .../bindings/media/i2c/sony,imx681.yaml       | 107 ++++++++++++++++++
 1 file changed, 107 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx681.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx681.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx681.yaml
new file mode 100644
index 000000000..6d2e4ddce
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx681.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx681.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX681 CMOS Image Sensor
+
+maintainers:
+  - Andre Gilerson <andre.gilerson@gmail.com>
+
+description:
+  The Sony IMX681 is a CMOS active pixel image sensor with a square pixel
+  array, used as the user-facing camera on several Microsoft Surface devices.
+  It operates from analog 2.8 V, digital 1.05 V and interface 1.8 V supplies,
+  is programmable over I2C, and outputs 10-bit Bayer data over a two-lane
+  MIPI CSI-2 D-PHY interface.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: sony,imx681
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Input clock (19.2 MHz)
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog power supply (2.8 V)
+
+  dvdd-supply:
+    description: Digital power supply (1.05 V)
+
+  dovdd-supply:
+    description: Interface power supply (1.8 V)
+
+  reset-gpios:
+    description: Sensor reset (XCLR) GPIO, active low
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+              - const: 2
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - avdd-supply
+  - dvdd-supply
+  - dovdd-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@10 {
+            compatible = "sony,imx681";
+            reg = <0x10>;
+            clocks = <&clock_cam>;
+            avdd-supply = <&vcc2v8_cam>;
+            dvdd-supply = <&vcc1v05_cam>;
+            dovdd-supply = <&vcc1v8_cam>;
+            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+            orientation = <0>;
+            rotation = <0>;
+
+            port {
+                imx681_ep: endpoint {
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <969600000>;
+                    remote-endpoint = <&csi_in>;
+                };
+            };
+        };
+    };
+...
-- 
2.53.0



  reply	other threads:[~2026-09-09 20:37 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-09 20:37 [PATCH v3 0/3] media: Add support for the Sony IMX681 Sergey Lebedev
2026-09-09 20:37 ` Sergey Lebedev [this message]
2026-09-11  7:36   ` [PATCH v3 1/3] dt-bindings: media: Add " Krzysztof Kozlowski
2026-09-09 20:37 ` [PATCH v3 2/3] media: i2c: Add Sony IMX681 sensor driver Sergey Lebedev
2026-09-09 20:52   ` sashiko-bot
2026-09-09 21:14   ` Sergey Lebedev
2026-09-11  7:38   ` Krzysztof Kozlowski
2026-09-11  9:24     ` Sergey Lebedev
2026-09-09 20:37 ` [PATCH v3 3/3] media: ipu-bridge: Add Sony IMX681 Sergey Lebedev
2026-09-09 20:46   ` sashiko-bot
2026-09-10 10:36 ` Test for [PATCH v3 0/3] media: Add support for the " German
2026-09-10 11:22   ` Sergey Lebedev
2026-09-10 11:48     ` Test on another machine and userspace for [PATCH v3 0/3] media: Add support for the Sony IMX681 Thanks for clarifying the origin of the errors I am more than happy to provide the tag Tested-by: German <germanpapulindez@gmail.com> German
2026-09-10 11:53     ` Test on another machine and userspace for [PATCH v3 0/3] media: Add support for the Sony IMX681 German
2026-09-11  7:35       ` Krzysztof Kozlowski
2026-09-12 16:16 ` cause of the image error in Gnome Snapshot " German

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260909203717.90605-2-lsa.uz@pm.me \
    --to=lsa.uz@pm.me \
    --cc=andre.gilerson@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=dan.scally@ideasonboard.com \
    --cc=devicetree@vger.kernel.org \
    --cc=germanpapulindez@gmail.com \
    --cc=hansg@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox