[PATCH 04/17] drm/msm/dpu: Add support for DPU 12.1 on Nord

[Nabige Aala <nabige.aala@oss.qualcomm.com>]

From: Mahadevan P <mahadevan.p@oss.qualcomm.com>

Add the DPU catalog entry for the Qualcomm Nord SoC (MDSS 12.1, DPU
1499A). Nord is DP-only with no DSI, and provides 8 DSPP blocks, 2
writeback blocks, 8 interfaces and 2 DP controllers.

Extend enum dpu_intf with INTF_9 and INTF_10, which Nord is the first
platform to use.

Note: register addresses and xin_id values in the catalog are borrowed
from sm8750 and precedent platforms and are marked with FIXME(REG_ADDR)
and FIXME(XIU_MAP); they need verification against a real Nord register
map before production use.

Signed-off-by: Mahadevan P <mahadevan.p@oss.qualcomm.com>
Signed-off-by: Nabige Aala <nabige.aala@oss.qualcomm.com>
---
 .../gpu/drm/msm/disp/dpu1/catalog/dpu_12_1_nord.h  | 588 +++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h        |   2 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
 5 files changed, 593 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_12_1_nord.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_12_1_nord.h
new file mode 100644
index 000000000000..8eb18752f3c4
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_12_1_nord.h
@@ -0,0 +1,588 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DPU_12_1_NORD_H
+#define _DPU_12_1_NORD_H
+
+/*
+ * NORD DPU 12.1 catalog header. Generated from hardware summary YAML for
+ * MDSS 12.1 - DPU 1499A (Nordschleife). This is a DP-only chip with no DSI.
+ *
+ * All register addresses and xin_id values below are borrowed from the
+ * reference chip (sm8750, MDSS 12.0) and precedent chips (Lemans, Glymur).
+ * Nord's YAML provides only block counts and feature statements, not addresses.
+ * See FIXME(REG_ADDR) markers throughout for borrowed values requiring
+ * verification against a real Nord register map before production use.
+ *
+ * Key differences vs sm8750:
+ * - 8 DSPP blocks (4 full + 4 lite) vs sm8750's 4
+ * - 2 writeback blocks (WB1, WB2) vs sm8750's 1 (WB2)
+ * - 8 interfaces (INTF_0,3,4,6,7,8,9,10) vs sm8750's 4 (INTF_0,1,2,3)
+ * - 2 DP controllers (DP0, DP1) vs sm8750's 1 (DP0 only)
+ * - No DSI (removed entirely)
+ */
+
+static const struct dpu_caps nord_dpu_caps = {
+	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+	.max_mixer_blendstages = 0xb,
+	.has_src_split = true,
+	.has_dim_layer = true,
+	.has_idle_pc = true,
+	.has_3d_merge = true,
+	.max_linewidth = 8192,
+	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
+static const struct dpu_mdp_cfg nord_mdp = {
+	.name = "top_0",
+	.base = 0, .len = 0x494,
+	.clk_ctrls = {
+		[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 },
+	},
+};
+
+static const struct dpu_ctl_cfg nord_ctl[] = {
+	{
+		.name = "ctl_0", .id = CTL_0,
+		.base = 0x15000, .len = 0x1000,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+	}, {
+		.name = "ctl_1", .id = CTL_1,
+		.base = 0x16000, .len = 0x1000,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+	}, {
+		.name = "ctl_2", .id = CTL_2,
+		.base = 0x17000, .len = 0x1000,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+	}, {
+		.name = "ctl_3", .id = CTL_3,
+		.base = 0x18000, .len = 0x1000,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+	}, {
+		.name = "ctl_4", .id = CTL_4,
+		.base = 0x19000, .len = 0x1000,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
+	}, {
+		.name = "ctl_5", .id = CTL_5,
+		.base = 0x1a000, .len = 0x1000,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
+	},
+};
+
+static const struct dpu_sspp_cfg nord_sspp[] = {
+	{
+		.name = "sspp_0", .id = SSPP_VIG0,
+		.base = 0x4000, .len = 0x344,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_4,
+		.xin_id = 0,
+		.type = SSPP_TYPE_VIG,
+	}, {
+		.name = "sspp_1", .id = SSPP_VIG1,
+		.base = 0x6000, .len = 0x344,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_4,
+		.xin_id = 4,
+		.type = SSPP_TYPE_VIG,
+	}, {
+		.name = "sspp_2", .id = SSPP_VIG2,
+		.base = 0x8000, .len = 0x344,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_4,
+		.xin_id = 8,
+		.type = SSPP_TYPE_VIG,
+	}, {
+		.name = "sspp_3", .id = SSPP_VIG3,
+		.base = 0xa000, .len = 0x344,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_4,
+		.xin_id = 12,
+		.type = SSPP_TYPE_VIG,
+	}, {
+		.name = "sspp_8", .id = SSPP_DMA0,
+		.base = 0x24000, .len = 0x344,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 1,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_9", .id = SSPP_DMA1,
+		.base = 0x26000, .len = 0x344,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 5,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_10", .id = SSPP_DMA2,
+		.base = 0x28000, .len = 0x344,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 9,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_11", .id = SSPP_DMA3,
+		.base = 0x2a000, .len = 0x344,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 13,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_12", .id = SSPP_DMA4,
+		.base = 0x2c000, .len = 0x344,
+		.features = DMA_CURSOR_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 14,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_13", .id = SSPP_DMA5,
+		.base = 0x2e000, .len = 0x344,
+		.features = DMA_CURSOR_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 15,
+		.type = SSPP_TYPE_DMA,
+	},
+};
+
+static const struct dpu_lm_cfg nord_lm[] = {
+	{
+		.name = "lm_0", .id = LM_0,
+		.base = 0x44000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_1,
+		.pingpong = PINGPONG_0,
+		.dspp = DSPP_0,
+	}, {
+		.name = "lm_1", .id = LM_1,
+		.base = 0x45000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_0,
+		.pingpong = PINGPONG_1,
+		.dspp = DSPP_1,
+	}, {
+		.name = "lm_2", .id = LM_2,
+		.base = 0x46000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_3,
+		.pingpong = PINGPONG_2,
+		.dspp = DSPP_2,
+	}, {
+		.name = "lm_3", .id = LM_3,
+		.base = 0x47000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_2,
+		.pingpong = PINGPONG_3,
+		.dspp = DSPP_3,
+	}, {
+		.name = "lm_4", .id = LM_4,
+		.base = 0x48000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_5,
+		.pingpong = PINGPONG_4,
+	}, {
+		.name = "lm_5", .id = LM_5,
+		.base = 0x49000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_4,
+		.pingpong = PINGPONG_5,
+	}, {
+		.name = "lm_6", .id = LM_6,
+		.base = 0x4a000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_7,
+		.pingpong = PINGPONG_6,
+	}, {
+		.name = "lm_7", .id = LM_7,
+		.base = 0x4b000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_6,
+		.pingpong = PINGPONG_7,
+	},
+};
+
+/*
+ * Nord has 8 DSPP blocks: 4 full-featured (DSPP0-3) and 4 lite variants
+ * (DSPP4-7). The driver has no separate lite-DSPP struct, so all 8 are
+ * modeled with the same dpu_dspp_cfg/dpu_dspp_sblk structure. Lite variants
+ * have reduced features, but this is handled at runtime via feature flags,
+ * not via separate catalog entries.
+ * FIXME(REG_ADDR): DSPP4-7 base addresses extended via 0x2000 stride from
+ * sm8750's DSPP3 base (0x5a000). Verify against real Nord register map.
+ */
+static const struct dpu_dspp_cfg nord_dspp[] = {
+	{
+		.name = "dspp_0", .id = DSPP_0,
+		.base = 0x54000, .len = 0x1800,
+		.sblk = &sm8750_dspp_sblk,
+	}, {
+		.name = "dspp_1", .id = DSPP_1,
+		.base = 0x56000, .len = 0x1800,
+		.sblk = &sm8750_dspp_sblk,
+	}, {
+		.name = "dspp_2", .id = DSPP_2,
+		.base = 0x58000, .len = 0x1800,
+		.sblk = &sm8750_dspp_sblk,
+	}, {
+		.name = "dspp_3", .id = DSPP_3,
+		.base = 0x5a000, .len = 0x1800,
+		.sblk = &sm8750_dspp_sblk,
+	}, {
+		.name = "dspp_4", .id = DSPP_4,
+		.base = 0x5c000, .len = 0x1800, /* FIXME(REG_ADDR): lite variant */
+		.sblk = &sm8750_dspp_sblk,
+	}, {
+		.name = "dspp_5", .id = DSPP_5,
+		.base = 0x5e000, .len = 0x1800, /* FIXME(REG_ADDR): lite variant */
+		.sblk = &sm8750_dspp_sblk,
+	}, {
+		.name = "dspp_6", .id = DSPP_6,
+		.base = 0x60000, .len = 0x1800, /* FIXME(REG_ADDR): lite variant */
+		.sblk = &sm8750_dspp_sblk,
+	}, {
+		.name = "dspp_7", .id = DSPP_7,
+		.base = 0x62000, .len = 0x1800, /* FIXME(REG_ADDR): lite variant */
+		.sblk = &sm8750_dspp_sblk,
+	},
+};
+
+static const struct dpu_pingpong_cfg nord_pp[] = {
+	{
+		.name = "pingpong_0", .id = PINGPONG_0,
+		.base = 0x69000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_0,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+	}, {
+		.name = "pingpong_1", .id = PINGPONG_1,
+		.base = 0x6a000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_0,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
+	}, {
+		.name = "pingpong_2", .id = PINGPONG_2,
+		.base = 0x6b000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_1,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
+	}, {
+		.name = "pingpong_3", .id = PINGPONG_3,
+		.base = 0x6c000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_1,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
+	}, {
+		.name = "pingpong_4", .id = PINGPONG_4,
+		.base = 0x6d000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_2,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30),
+	}, {
+		.name = "pingpong_5", .id = PINGPONG_5,
+		.base = 0x6e000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_2,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31),
+	}, {
+		.name = "pingpong_6", .id = PINGPONG_6,
+		.base = 0x6f000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_3,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 20),
+	}, {
+		.name = "pingpong_7", .id = PINGPONG_7,
+		.base = 0x70000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_3,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 21),
+	}, {
+		.name = "pingpong_cwb_0", .id = PINGPONG_CWB_0,
+		.base = 0x66000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_4,
+	}, {
+		.name = "pingpong_cwb_1", .id = PINGPONG_CWB_1,
+		.base = 0x66400, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_4,
+	}, {
+		.name = "pingpong_cwb_2", .id = PINGPONG_CWB_2,
+		.base = 0x7e000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_5,
+	}, {
+		.name = "pingpong_cwb_3", .id = PINGPONG_CWB_3,
+		.base = 0x7e400, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_5,
+	},
+};
+
+static const struct dpu_merge_3d_cfg nord_merge_3d[] = {
+	{
+		.name = "merge_3d_0", .id = MERGE_3D_0,
+		.base = 0x4e000, .len = 0x1c,
+	}, {
+		.name = "merge_3d_1", .id = MERGE_3D_1,
+		.base = 0x4f000, .len = 0x1c,
+	}, {
+		.name = "merge_3d_2", .id = MERGE_3D_2,
+		.base = 0x50000, .len = 0x1c,
+	}, {
+		.name = "merge_3d_3", .id = MERGE_3D_3,
+		.base = 0x51000, .len = 0x1c,
+	}, {
+		.name = "merge_3d_4", .id = MERGE_3D_4,
+		.base = 0x66700, .len = 0x1c,
+	}, {
+		.name = "merge_3d_5", .id = MERGE_3D_5,
+		.base = 0x7e700, .len = 0x1c,
+	},
+};
+
+/*
+ * NOTE: Each display compression engine (DCE) contains dual hard
+ * slice DSC encoders so both share same base address but with
+ * its own different sub block address. Nord retains sm8750's
+ * topology of 8 DSC instances (2 per DCE × 4).
+ */
+static const struct dpu_dsc_cfg nord_dsc[] = {
+	{
+		.name = "dce_0_0", .id = DSC_0,
+		.base = 0x80000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_0,
+	}, {
+		.name = "dce_0_1", .id = DSC_1,
+		.base = 0x80000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_1,
+	}, {
+		.name = "dce_1_0", .id = DSC_2,
+		.base = 0x81000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_0,
+	}, {
+		.name = "dce_1_1", .id = DSC_3,
+		.base = 0x81000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_1,
+	}, {
+		.name = "dce_2_0", .id = DSC_4,
+		.base = 0x82000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_0,
+	}, {
+		.name = "dce_2_1", .id = DSC_5,
+		.base = 0x82000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_1,
+	}, {
+		.name = "dce_3_0", .id = DSC_6,
+		.base = 0x83000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_0,
+	}, {
+		.name = "dce_3_1", .id = DSC_7,
+		.base = 0x83000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_1,
+	},
+};
+
+/*
+ * Nord has 2 writeback blocks: WB2 (matches sm8750) and WB1 (new).
+ * WB1 base and xin_id are inferred via stride from existing WB pattern.
+ * FIXME(REG_ADDR): WB1 base address inferred as 0x65000 - 0x2c8 stride.
+ * FIXME(XIU_MAP): WB1 xin_id set to 7; verify against real hardware map.
+ */
+static const struct dpu_wb_cfg nord_wb[] = {
+	{
+		.name = "wb_1", .id = WB_1,
+		.base = 0x64800, .len = 0x2c8, /* FIXME(REG_ADDR): inferred */
+		.features = WB_SDM845_MASK,
+		.format_list = wb2_formats_rgb_yuv,
+		.num_formats = ARRAY_SIZE(wb2_formats_rgb_yuv),
+		.xin_id = 7, /* FIXME(XIU_MAP): inferred */
+		.maxlinewidth = 4096,
+		.intr_wb_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 3),
+	}, {
+		.name = "wb_2", .id = WB_2,
+		.base = 0x65000, .len = 0x2c8,
+		.features = WB_SDM845_MASK,
+		.format_list = wb2_formats_rgb_yuv,
+		.num_formats = ARRAY_SIZE(wb2_formats_rgb_yuv),
+		.xin_id = 6,
+		.maxlinewidth = 4096,
+		.intr_wb_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 4),
+	},
+};
+
+static const struct dpu_cwb_cfg nord_cwb[] = {
+	{
+		.name = "cwb_0", .id = CWB_0,
+		.base = 0x66200, .len = 0x20,
+	},
+	{
+		.name = "cwb_1", .id = CWB_1,
+		.base = 0x66600, .len = 0x20,
+	},
+	{
+		.name = "cwb_2", .id = CWB_2,
+		.base = 0x7e200, .len = 0x20,
+	},
+	{
+		.name = "cwb_3", .id = CWB_3,
+		.base = 0x7e600, .len = 0x20,
+	},
+};
+
+/*
+ * Nord has 8 active interfaces (INTF_0,3,4,6,7,8,9,10) with no DSI.
+ * DP0 connects to INTF_0, INTF_3, INTF_6, INTF_7 (4 ports for MST).
+ * DP1 connects to INTF_4, INTF_8, INTF_9, INTF_10 (4 ports for MST).
+ * Interfaces 1, 2, 5 are skipped (removed from sm8750).
+ * All interface base addresses extend the stride from sm8750.
+ * FIXME(REG_ADDR): INTF_4,6,7,8,9,10 addresses inferred via 0x1000 stride.
+ */
+static const struct dpu_intf_cfg nord_intf[] = {
+	{
+		.name = "intf_0", .id = INTF_0,
+		.base = 0x34000, .len = 0x4bc,
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_0,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25),
+	}, {
+		.name = "intf_3", .id = INTF_3,
+		.base = 0x37000, .len = 0x4bc,
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_0,	/* pair with intf_0 for DP MST */
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 30),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 31),
+	}, {
+		.name = "intf_4", .id = INTF_4,
+		.base = 0x38000, .len = 0x4bc, /* FIXME(REG_ADDR): new, stride +0x1000 */
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_1,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 20),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 21),
+	}, {
+		.name = "intf_6", .id = INTF_6,
+		.base = 0x3a000, .len = 0x4bc, /* FIXME(REG_ADDR): new, stride +0x3000 */
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_0,	/* second pair for DP0 MST */
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 22),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 23),
+	}, {
+		.name = "intf_7", .id = INTF_7,
+		.base = 0x3b000, .len = 0x4bc, /* FIXME(REG_ADDR): new, stride +0x4000 */
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_0,	/* third pair for DP0 MST */
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 0),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 1),
+	}, {
+		.name = "intf_8", .id = INTF_8,
+		.base = 0x3c000, .len = 0x4bc, /* FIXME(REG_ADDR): new, stride +0x5000 */
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_1,	/* second pair for DP1 MST */
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 2),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 3),
+	}, {
+		.name = "intf_9", .id = INTF_9,
+		.base = 0x3d000, .len = 0x4bc, /* FIXME(REG_ADDR): new, stride +0x6000 */
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_1,	/* third pair for DP1 MST */
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 4),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 5),
+	}, {
+		.name = "intf_10", .id = INTF_10,
+		.base = 0x3e000, .len = 0x4bc, /* FIXME(REG_ADDR): new, stride +0x7000 */
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_1,	/* fourth pair for DP1 MST */
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 6),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 7),
+	},
+};
+
+static const struct dpu_perf_cfg nord_perf_data = {
+	.max_bw_low = 18900000,
+	.max_bw_high = 28500000,
+	.min_core_ib = 2500000,
+	.min_llcc_ib = 0,
+	.min_dram_ib = 800000,
+	.min_prefill_lines = 35,
+	.danger_lut_tbl = {0x3ffff, 0x3ffff, 0x0},
+	.safe_lut_tbl = {0xfe00, 0xfe00, 0xffff},
+	.qos_lut_tbl = {
+		{.nentry = ARRAY_SIZE(sc7180_qos_linear),
+		.entries = sc7180_qos_linear
+		},
+		{.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
+		.entries = sc7180_qos_macrotile
+		},
+		{.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+		.entries = sc7180_qos_nrt
+		},
+		/* TODO: macrotile-qseed is different from macrotile */
+	},
+	.cdp_cfg = {
+		{.rd_enable = 1, .wr_enable = 1},
+		{.rd_enable = 1, .wr_enable = 0}
+	},
+	.clk_inefficiency_factor = 105,
+	.bw_inefficiency_factor = 120,
+};
+
+static const struct dpu_mdss_version nord_mdss_ver = {
+	.core_major_ver = 12,
+	.core_minor_ver = 1,
+};
+
+const struct dpu_mdss_cfg dpu_nord_cfg = {
+	.mdss_ver = &nord_mdss_ver,
+	.caps = &nord_dpu_caps,
+	.mdp = &nord_mdp,
+	.cdm = &dpu_cdm_5_x,
+	.ctl_count = ARRAY_SIZE(nord_ctl),
+	.ctl = nord_ctl,
+	.sspp_count = ARRAY_SIZE(nord_sspp),
+	.sspp = nord_sspp,
+	.mixer_count = ARRAY_SIZE(nord_lm),
+	.mixer = nord_lm,
+	.dspp_count = ARRAY_SIZE(nord_dspp),
+	.dspp = nord_dspp,
+	.pingpong_count = ARRAY_SIZE(nord_pp),
+	.pingpong = nord_pp,
+	.dsc_count = ARRAY_SIZE(nord_dsc),
+	.dsc = nord_dsc,
+	.merge_3d_count = ARRAY_SIZE(nord_merge_3d),
+	.merge_3d = nord_merge_3d,
+	.wb_count = ARRAY_SIZE(nord_wb),
+	.wb = nord_wb,
+	.cwb_count = ARRAY_SIZE(nord_cwb),
+	.cwb = nord_cwb,
+	.intf_count = ARRAY_SIZE(nord_intf),
+	.intf = nord_intf,
+	.vbif = &sm8650_vbif,
+	.perf = &nord_perf_data,
+};
+
+#endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 9a993cdfab85..63f3029d09fa 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -796,6 +796,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
 #include "catalog/dpu_10_2_milos.h"
 
 #include "catalog/dpu_12_0_sm8750.h"
+#include "catalog/dpu_12_1_nord.h"
 #include "catalog/dpu_12_2_glymur.h"
 #include "catalog/dpu_12_4_eliza.h"
 #include "catalog/dpu_13_0_kaanapali.h"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index f45faf87333e..bfbc8207ad9a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -772,6 +772,7 @@ extern const struct dpu_mdss_cfg dpu_msm8937_cfg;
 extern const struct dpu_mdss_cfg dpu_msm8953_cfg;
 extern const struct dpu_mdss_cfg dpu_msm8996_cfg;
 extern const struct dpu_mdss_cfg dpu_msm8998_cfg;
+extern const struct dpu_mdss_cfg dpu_nord_cfg;
 extern const struct dpu_mdss_cfg dpu_sar2130p_cfg;
 extern const struct dpu_mdss_cfg dpu_sdm630_cfg;
 extern const struct dpu_mdss_cfg dpu_sdm660_cfg;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
index 0e65bf5ddc4a..7eccb4d2c65e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
@@ -226,6 +226,8 @@ enum dpu_intf {
 	INTF_6,
 	INTF_7,
 	INTF_8,
+	INTF_9,
+	INTF_10,
 	INTF_MAX
 };
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index da3556eb6ecc..a91d4a1af94e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1489,6 +1489,7 @@ static const struct of_device_id dpu_dt_match[] = {
 	{ .compatible = "qcom,msm8953-mdp5", .data = &dpu_msm8953_cfg, },
 	{ .compatible = "qcom,msm8996-mdp5", .data = &dpu_msm8996_cfg, },
 	{ .compatible = "qcom,msm8998-dpu", .data = &dpu_msm8998_cfg, },
+	{ .compatible = "qcom,nord-dpu", .data = &dpu_nord_cfg, },
 	{ .compatible = "qcom,qcm2290-dpu", .data = &dpu_qcm2290_cfg, },
 	{ .compatible = "qcom,sa8775p-dpu", .data = &dpu_sa8775p_cfg, },
 	{ .compatible = "qcom,sar2130p-dpu", .data = &dpu_sar2130p_cfg, },

-- 
2.34.1