[PATCH 09/17] phy: qcom: edp: Add Nord AUX channel and VCO divider configuration tables

[Nabige Aala <nabige.aala@oss.qualcomm.com>]

From: Ritesh Kumar <ritesh.kumar@oss.qualcomm.com>

Nord requires different AUX channel and VCO divider settings compared
to existing SoCs.  Add edp_phy_aux_cfg_nord and edp_phy_vco_div_cfg_nord
with values sourced from HPG Tables 2-1-a and 2-1-b respectively.

Signed-off-by: Ritesh Kumar <ritesh.kumar@oss.qualcomm.com>
Signed-off-by: Nabige Aala <nabige.aala@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 373f13b3d6d5..ee0d7f1a90fe 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -1508,6 +1508,25 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
+/*
+ * nord AUX config (eDP mode).
+ * From HPG Table 2-1-a: edp_phy_aux_bist.csv
+ * Index:  0     1     2     3     4     5     6     7     8     9    10    11    12
+ */
+static const u8 edp_phy_aux_cfg_nord[DP_AUX_CFG_SIZE] = {
+	0x00, 0x13, 0xa4, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03, 0x02, 0x02, 0x04,
+};
+
+/*
+ * nord VCO_DIV config for eDP mode.
+ * From HPG Table 2-1-b AUX Clock Settings (eDP mode) - Nominal/Turbo column.
+ * Indices: [0]=1620, [1]=2700, [2]=5400, [3]=8100
+ */
+static const u8 edp_phy_vco_div_cfg_nord[4] = {
+	0x00, 0x00, 0x02, 0x01,
+};
+
+
 static const struct of_device_id qcom_edp_phy_match_table[] = {
 	{ .compatible = "qcom,glymur-dp-phy", .data = &glymur_phy_cfg, },
 	{ .compatible = "qcom,sa8775p-edp-phy", .data = &sa8775p_dp_phy_cfg, },

-- 
2.34.1