[PATCH v3 2/8] arm64: dts: qcom: shikra: Add QAIF CPU node for audio

[Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>]

Add the QAIF CPU endpoint in shikra.dtsi so board files can connect LPASS
front-end links to backend codecs.

Describe the MMIO region, interrupt, IOMMU mapping and required clocks for
the QAIF block. Keep the node disabled at SoC level; board dts files enable
and consume it in subsequent patches.

Co-developed-by: Harendra Gautam <harendra.gautam@oss.qualcomm.com>
Signed-off-by: Harendra Gautam <harendra.gautam@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/shikra.dtsi | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index 999b478e1640..7633d274e090 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -16,6 +16,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -3595,6 +3596,40 @@ cti@9900000 {
 			label = "cti_apss_2";
 		};
 
+		qaif_cpu: audio@a000000 {
+			compatible = "qcom,shikra-qaif-cpu";
+			reg = <0x0 0x0a000000 0x0 0x20000>;
+
+			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			clocks = <&gcc GCC_LPASS_CONFIG_CLK>,
+				 <&gcc GCC_LPASS_CORE_AXIM_CLK>,
+				 <&audiocorecc AUDIO_CORE_CC_AUD_DMA_CLK>,
+				 <&audiocorecc AUDIO_CORE_CC_AUD_DMA_MEM_CLK>,
+				 <&audiocorecc AUDIO_CORE_CC_BUS_CLK>,
+				 <&audiocorecc AUDIO_CORE_CC_AIF_IF0_IBIT_CLK>,
+				 <&audiocorecc AUDIO_CORE_CC_AIF_IF1_IBIT_CLK>,
+				 <&audiocorecc AUDIO_CORE_CC_AIF_IF2_IBIT_CLK>,
+				 <&audiocorecc AUDIO_CORE_CC_AIF_IF3_IBIT_CLK>;
+			clock-names = "lpass_config",
+				      "lpass_core_axim",
+				      "aud_dma",
+				      "aud_dma_mem",
+				      "bus",
+				      "aif_if0_ibit",
+				      "aif_if1_ibit",
+				      "aif_if2_ibit",
+				      "aif_if3_ibit";
+
+			iommus = <&apps_smmu 0x1c0 0x0>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		audiocorecc: clock-controller@a0a0000 {
 			compatible = "qcom,shikra-audiocorecc";
 			reg = <0x0 0x0a0a0000 0x0 0x10000>;

-- 
2.34.1