Devicetree
 help / color / mirror / Atom feed
From: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
To: Srinivas Kandagatla <srini@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>,
	linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Subject: [PATCH v3 7/8] arm64: dts: qcom: shikra-iqs-evk: Enable sound card support
Date: Thu, 17 Sep 2026 10:07:36 +0530	[thread overview]
Message-ID: <20260917-shikra_audio_dts-v3-7-9a49e1ca6370@oss.qualcomm.com> (raw)
In-Reply-To: <20260917-shikra_audio_dts-v3-0-9a49e1ca6370@oss.qualcomm.com>

Enable the IQS EVK audio card using MAX98091 on I2S0 for primary
playback/capture and VA DMIC capture through q6apm backend links.

Add board clock and pinctrl states required for codec IRQ, external
mclk and digital mic routing.

Co-developed-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 144 ++++++++++++++++++++++++++++
 1 file changed, 144 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
index 543d769125ef..54c840a748c8 100644
--- a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
@@ -21,6 +21,105 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	sound {
+		compatible = "qcom,shikra-iqs-sndcard";
+		model = "shikra-iqs-evk";
+
+		pinctrl-0 = <&i2s0_default>, <&ext_mclk2_active>;
+		pinctrl-names = "default";
+
+		audio-routing = "IN34", "Headset Mic",
+				"Headset Mic", "MICBIAS",
+				"DMICL", "Int Mic",
+				"Int Mic", "MICBIAS",
+				"Headphone", "HPL",
+				"Headphone", "HPR",
+				"Speaker", "SPKL",
+				"Speaker", "SPKR",
+				"VA DMIC0", "vdd-micb",
+				"VA DMIC1", "vdd-micb",
+				"VA DMIC2", "vdd-micb",
+				"VA DMIC3", "vdd-micb";
+
+		pri-i2s-playback-dai-link {
+			link-name = "Analog Playback";
+
+			codec {
+				sound-dai = <&max98091>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		pri-i2s-capture-dai-link {
+			link-name = "Analog Capture";
+
+			codec {
+				sound-dai = <&max98091>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dmic-dai-link {
+			link-name = "VA DMIC Capture";
+
+			codec {
+				sound-dai = <&vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	max98091: audio-codec@10 {
+		compatible = "maxim,max98091";
+		reg = <0x10>;
+
+		pinctrl-0 = <&max98091_default>;
+		pinctrl-names = "default";
+
+		interrupts-extended = <&tlmm 28 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&q6prmcc LPASS_CLK_ID_MCLK_2 LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+		clock-names = "mclk";
+		assigned-clocks = <&q6prmcc LPASS_CLK_ID_MCLK_2 LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&q6apmbedai {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		clocks = <&q6prmcc LPASS_CLK_ID_QAIF_IF0_IBIT LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+		clock-names = "bclk";
+	};
 };
 
 &remoteproc_cdsp {
@@ -80,3 +179,48 @@ &usb_2_hsphy {
 
 	status = "okay";
 };
+
+&tlmm {
+	dmic_eldo_en_default: dmic-eldo-default-active-state {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
+	};
+
+	ext_mclk2_active: ext-mclk2-state {
+		pins = "gpio110";
+		function = "ext_mclk";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	i2s0_default: i2s0-default-active-state {
+		pins = "gpio105", "gpio106", "gpio107", "gpio108", "gpio109";
+		function = "i2s0";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	max98091_default: max98091-default-state {
+		pins = "gpio28";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&vamacro {
+	clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+	clock-names = "mclk",
+		      "npl";
+
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>, <&dmic_eldo_en_default>;
+	pinctrl-names = "default";
+
+	qcom,dmic-sample-rate = <4800000>;
+
+	status = "okay";
+};
+

-- 
2.34.1


  parent reply	other threads:[~2026-09-17  4:38 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-17  4:37 [PATCH v3 0/8] arm64: dts: qcom: shikra: Enable audio on EVK boards Mohammad Rafi Shaik
2026-09-17  4:37 ` [PATCH v3 1/8] ASoC: dt-bindings: qcom,apr: Add modem_apps GLINK channel for shikra Mohammad Rafi Shaik
2026-09-17  4:37 ` [PATCH v3 2/8] arm64: dts: qcom: shikra: Add QAIF CPU node for audio Mohammad Rafi Shaik
2026-09-17 15:35   ` Abel Vesa
2026-09-29 10:45     ` Mohammad Rafi Shaik
2026-09-17  4:37 ` [PATCH v3 3/8] arm64: dts: qcom: shikra: Add gpr node Mohammad Rafi Shaik
2026-09-17  4:37 ` [PATCH v3 4/8] arm64: dts: qcom: shikra: Add soundwire and macro nodes Mohammad Rafi Shaik
2026-09-17  4:37 ` [PATCH v3 5/8] arm64: dts: qcom: shikra-cqm-evk: Enable sound card support Mohammad Rafi Shaik
2026-09-17  4:37 ` [PATCH v3 6/8] arm64: dts: qcom: shikra-cqs-evk: " Mohammad Rafi Shaik
2026-09-17  4:37 ` Mohammad Rafi Shaik [this message]
2026-09-17  4:37 ` [PATCH v3 8/8] arm64: defconfig: Enable Qualcomm PM4125 and WSA885X drivers Mohammad Rafi Shaik
2026-09-29  3:15 ` (subset) [PATCH v3 0/8] arm64: dts: qcom: shikra: Enable audio on EVK boards Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260917-shikra_audio_dts-v3-7-9a49e1ca6370@oss.qualcomm.com \
    --to=mohammad.rafi.shaik@oss.qualcomm.com \
    --cc=abelvesa@kernel.org \
    --cc=ajay.nandam@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=srini@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox