[PATCH v3 6/6] riscv: dts: spacemit: k3: Replace incorrect CLINT node with ACLINT nodes

[Junhui Liu <junhui.liu@pigmoral.tech>]

The K3 implements separate ACLINT MSWI, MTIMER and SSWI devices. The
existing CLINT node at 0xe081c000 incorrectly describes the SSWI
register space in the non-secure window as a legacy CLINT.

The ACLINT register space is mapped at two base addresses: a secure
window at 0xf1810000 and a non-secure window at 0xe0810000. The
secure window exposes all three components, while the non-secure
window only exposes SSWI; the MSWI and MTIMER offsets are reserved
there. Moreover, depending on the eFuse configuration, the non-secure
window may be entirely inaccessible, whereas the secure window is
always available.

Replace the CLINT node with the three ACLINT devices, all using
secure-window addresses: MSWI and MTIMER for machine-level firmware
such as OpenSBI, and SSWI for supervisor software interrupts.

Fixes: 56f37e391a62 ("riscv: dts: spacemit: add initial support for K3 SoC")
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
---
 arch/riscv/boot/dts/spacemit/k3.dtsi | 43 +++++++++++++++++++++++++-----------
 1 file changed, 30 insertions(+), 13 deletions(-)

diff --git a/arch/riscv/boot/dts/spacemit/k3.dtsi b/arch/riscv/boot/dts/spacemit/k3.dtsi
index c3f2dce0969c..74831974435e 100644
--- a/arch/riscv/boot/dts/spacemit/k3.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k3.dtsi
@@ -1261,19 +1261,6 @@ saplic: interrupt-controller@e0804000 {
 			riscv,num-sources = <512>;
 		};
 
-		clint: timer@e081c000 {
-			compatible = "spacemit,k3-clint", "sifive,clint0";
-			reg = <0x0 0xe081c000 0x0 0x4000>;
-			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
-					      <&cpu1_intc 3>, <&cpu1_intc 7>,
-					      <&cpu2_intc 3>, <&cpu2_intc 7>,
-					      <&cpu3_intc 3>, <&cpu3_intc 7>,
-					      <&cpu4_intc 3>, <&cpu4_intc 7>,
-					      <&cpu5_intc 3>, <&cpu5_intc 7>,
-					      <&cpu6_intc 3>, <&cpu6_intc 7>,
-					      <&cpu7_intc 3>, <&cpu7_intc 7>;
-		};
-
 		/* sec_i2c3: 0xf0614000, not available from Linux */
 
 		mimsic: interrupt-controller@f1000000 {
@@ -1305,5 +1292,35 @@ maplic: interrupt-controller@f1800000 {
 			riscv,num-sources = <512>;
 			status = "reserved";
 		};
+
+		aclint_mswi: interrupt-controller@f1810000 {
+			compatible = "spacemit,k3-aclint-mswi";
+			reg = <0x0 0xf1810000 0x0 0x4000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu1_intc 3>,
+					      <&cpu2_intc 3>, <&cpu3_intc 3>,
+					      <&cpu4_intc 3>, <&cpu5_intc 3>,
+					      <&cpu6_intc 3>, <&cpu7_intc 3>;
+		};
+
+		aclint_mtimer: timer@f1814000 {
+			compatible = "spacemit,k3-aclint-mtimer";
+			reg = <0x0 0xf1814000 0x0 0x8000>;
+			reg-names = "mtimecmp";
+			interrupts-extended = <&cpu0_intc 7>, <&cpu1_intc 7>,
+					      <&cpu2_intc 7>, <&cpu3_intc 7>,
+					      <&cpu4_intc 7>, <&cpu5_intc 7>,
+					      <&cpu6_intc 7>, <&cpu7_intc 7>;
+		};
+
+		aclint_sswi: interrupt-controller@f181c000 {
+			compatible = "spacemit,k3-aclint-sswi";
+			reg = <0x0 0xf181c000 0x0 0x4000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupts-extended = <&cpu0_intc 1>, <&cpu1_intc 1>,
+					      <&cpu2_intc 1>, <&cpu3_intc 1>,
+					      <&cpu4_intc 1>, <&cpu5_intc 1>,
+					      <&cpu6_intc 1>, <&cpu7_intc 1>;
+		};
 	};
 };

-- 
2.55.0