From: sashiko-bot@kernel.org
To: "Shawn Guo" <shengchao.guo@oss.qualcomm.com>
Cc: robh@kernel.org, devicetree@vger.kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: nord: Add bwmon node for Nord
Date: Tue, 22 Sep 2026 08:13:42 +0000 [thread overview]
Message-ID: <20260922081342.9BEB71F000FF@smtp.kernel.org> (raw)
In-Reply-To: <20260922080416.484280-1-shengchao.guo@oss.qualcomm.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] dts: qcom: missing status disabled on incomplete bwmon nodes
--
commit 2b4a55863dba14f87c025537e56ccb0a5f410f20
Author: Pushpendra Singh <pussin@qti.qualcomm.com>
arm64: dts: qcom: nord: Add bwmon node for Nord
Add BWMON nodes and associated OPP tables to enable dynamic DDR/LLCC
frequency scaling.
> diff --git a/arch/arm64/boot/dts/qcom/nord.dtsi b/arch/arm64/boot/dts/qcom/nord.dtsi
> index e0496fd40c308..9925e770dfa46 100644
> --- a/arch/arm64/boot/dts/qcom/nord.dtsi
> +++ b/arch/arm64/boot/dts/qcom/nord.dtsi
[ ... ]
> @@ -1460,6 +1460,73 @@ uart13: serial@a98000 {
> };
> };
>
> + bwmon_cluster2: pmu@1014400 {
> + reg = <0x0 0x01014400 0x0 0x600>;
> + interrupts = <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>;
> + operating-points-v2 = <&bwmon_cluster_opp_table>;
> + };
[Severity: Low]
Should this bwmon_cluster2 node include a status = "disabled" property?
Because this base node in arch/arm64/boot/dts/qcom/nord.dtsi is introduced
without a compatible property, it is enabled by default. Any board including
nord.dtsi without fully configuring this node will instantiate an incomplete
platform device and trigger dtbs_check schema validation errors.
> +
> + bwmon_cluster1: pmu@1015400 {
> + reg = <0x0 0x01015400 0x0 0x600>;
> + interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
> + operating-points-v2 = <&bwmon_cluster_opp_table>;
> + };
[Severity: Low]
Does this bwmon_cluster1 node also need to be disabled by default for the
same reason?
> +
> + bwmon_cluster0: pmu@1016400 {
> + reg = <0x0 0x01016400 0x0 0x600>;
> + interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
> +
> + operating-points-v2 = <&bwmon_cluster_opp_table>;
[Severity: Low]
And similarly for this bwmon_cluster0 node, should it have status = "disabled"
to prevent incomplete instantiation when the variant-specific compatible
string is missing?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260922080416.484280-1-shengchao.guo@oss.qualcomm.com?part=1
next prev parent reply other threads:[~2026-09-22 8:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-22 8:04 [PATCH] arm64: dts: qcom: nord: Add bwmon node for Nord Shawn Guo
2026-09-22 8:13 ` sashiko-bot [this message]
2026-09-22 8:26 ` Bartosz Golaszewski
2026-09-22 10:32 ` Konrad Dybcio
2026-09-22 14:56 ` Zhangfei Gao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260922081342.9BEB71F000FF@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=shengchao.guo@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox