From: sashiko-bot@kernel.org
To: "Mukesh Ojha" <mukesh.ojha@oss.qualcomm.com>
Cc: conor+dt@kernel.org, robh@kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 4/4] arm64: dts: qcom: hawi: Add base MTP board
Date: Tue, 22 Sep 2026 20:39:05 +0000 [thread overview]
Message-ID: <20260922203905.6098B1F000FF@smtp.kernel.org> (raw)
In-Reply-To: <20260923-hawi-dt-post-v1-4-e41473b6298b@oss.qualcomm.com>
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [Low] dt: empty endpoint with commented-out remote-endpoint in pmic_glink_dp_out
- [Low] dt: use of deprecated 'gpio' property instead of 'gpios' in fixed regulator
--
commit 4899e77f8239c42c43d695808f8c3db4831e0a93
Author: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
arm64: dts: qcom: hawi: Add base MTP board
This commit adds initial support for the Qualcomm Hawi MTP board. It enables
several base subsystems including PCIe, SD Card, UFS, USB, remoteproc, and
the UART console.
> diff --git a/arch/arm64/boot/dts/qcom/hawi-mtp.dts b/arch/arm64/boot/dts/qcom/hawi-mtp.dts
> new file mode 100644
> index 0000000000000..7709582491f9d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/hawi-mtp.dts
[ ... ]
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
[ ... ]
> + port@2 {
> + reg = <2>;
> +
> + pmic_glink_dp_out: endpoint {
> + //remote-endpoint = <&usb_dp_qmpphy_dp_in>;
> + };
> + };
[Severity: Low]
Is this empty endpoint intentional? The remote-endpoint property is commented
out here in pmic_glink_dp_out, which leaves a dangling endpoint and might
violate OF graph schema requirements.
> + };
> + };
> + };
> +
> + sdcard_vdd_3p0: sdcard-vdd-3p0 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "sdc-vdd123";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <1500>;
> +
> + gpio = <&pmh0104_c_e0_gpios 5 GPIO_ACTIVE_HIGH>;
[Severity: Low]
Should this use the gpios property instead of gpio? The gpio property is
deprecated for fixed regulators, and using it might trigger dtbs_check
schema compliance warnings.
> + enable-active-high;
> +
> + pinctrl-0 = <&sd_card_eldo_en>;
> + pinctrl-names = "default";
> +
> + vin-supply = <&vreg_bob1>;
> + };
> +};
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260923-hawi-dt-post-v1-0-e41473b6298b@oss.qualcomm.com?part=4
next prev parent reply other threads:[~2026-09-22 20:39 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-22 20:18 [PATCH 0/4] arm64: dts: qcom: Introduce Qualcomm Hawi platform device tree Mukesh Ojha
2026-09-22 20:18 ` [PATCH 1/4] dt-bindings: arm: cpus: Add Oryon PartNum 3 CPU compatibles Mukesh Ojha
2026-09-22 20:18 ` [PATCH 2/4] arm64: dts: qcom: hawi: Add header file for IPCC physical client IDs Mukesh Ojha
2026-09-22 20:18 ` [PATCH 3/4] arm64: dts: qcom: Introduce Hawi SoC Mukesh Ojha
2026-09-22 20:38 ` sashiko-bot
2026-09-23 17:36 ` Mukesh Ojha
2026-09-23 10:41 ` Konrad Dybcio
2026-09-23 13:03 ` Mukesh Ojha
2026-09-22 20:18 ` [PATCH 4/4] arm64: dts: qcom: hawi: Add base MTP board Mukesh Ojha
2026-09-22 20:39 ` sashiko-bot [this message]
2026-09-23 13:04 ` Mukesh Ojha
2026-09-23 10:42 ` Konrad Dybcio
2026-09-23 12:59 ` Mukesh Ojha
2026-09-24 1:06 ` (subset) [PATCH 0/4] arm64: dts: qcom: Introduce Qualcomm Hawi platform device tree Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260922203905.6098B1F000FF@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=mukesh.ojha@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox