From: sashiko-bot@kernel.org
To: "Sascha Hauer" <s.hauer@pengutronix.de>
Cc: conor+dt@kernel.org, media-ci@linuxtv.org, robh@kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH 4/9] media: synopsys: hdmirx: add async subdevice support
Date: Wed, 23 Sep 2026 13:58:08 +0000 [thread overview]
Message-ID: <20260923135809.622691F000FF@smtp.kernel.org> (raw)
In-Reply-To: <20260923-hdmirx-media-v1-4-ea3d77d4a5f3@pengutronix.de>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] media: missing graph_mutex lock in hdmirx_fwnode_bound() leading to list corruption
--
commit ac73c2eba89ee9517b8e00beeec227f11b4a4eae
Author: Gerald Loacker <gerald.loacker@wolfvision.net>
media: synopsys: hdmirx: add async subdevice support
Add V4L2 async notifier support to enable dynamic binding of connected
subdevices in the video pipeline. The driver parses device-tree endpoints
to discover and register video bridge subdevices.
> diff --git a/drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c b/drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c
> index 11a9b16586a57..0c7cac25bf694 100644
> --- a/drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c
> +++ b/drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c
[ ... ]
> @@ -2649,6 +2653,48 @@ static int hdmirx_register_cec(struct snps_hdmirx_dev *hdmirx_dev,
> return 0;
> }
>
> +static int hdmirx_fwnode_bound(struct v4l2_async_notifier *notifier,
> + struct v4l2_subdev *subdev,
> + struct v4l2_async_connection *asc)
> +{
> + struct snps_hdmirx_dev *hdmirx_dev =
> + container_of(notifier, struct snps_hdmirx_dev, notifier);
> + int source_pad;
> + int ret;
> +
> + source_pad = media_entity_get_fwnode_pad(&subdev->entity,
> + asc->match.fwnode,
> + MEDIA_PAD_FL_SOURCE);
> + if (source_pad < 0) {
> + dev_err(hdmirx_dev->dev, "%s has no source pad for %pfw: %d\n",
> + subdev->name, asc->match.fwnode, source_pad);
> + return source_pad;
> + }
> +
> + ret = media_create_pad_link(&subdev->entity, source_pad,
> + &hdmirx_dev->stream.vdev.entity, 0,
> + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE);
[Severity: High]
Is it safe to call media_create_pad_link() here without holding the
mdev->graph_mutex?
This function modifies shared media graph lists (such as mdev->links).
Since the media device has already been registered in hdmirx_probe(),
concurrent access from userspace is possible. A userspace process calling the
MEDIA_IOC_G_TOPOLOGY ioctl could be traversing the topology lists while this
call modifies them, potentially leading to list corruption.
Should this call be wrapped in mutex_lock(&hdmirx_dev->mdev.graph_mutex)?
> + if (ret) {
> + dev_err(hdmirx_dev->dev, "Failed to create media link: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
[ ... ]
> @@ -2772,9 +2820,38 @@ static int hdmirx_probe(struct platform_device *pdev)
> goto err_unreg_video_dev;
> }
>
> + ep_node = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1);
[Severity: High]
Does registering the async notifier after calling media_device_register()
expose a race condition?
The media_device_register() call (which happens just before this block in
hdmirx_probe()) exposes the topology traversal interface (MEDIA_IOC_G_TOPOLOGY)
to userspace prematurely.
This opens a race window where asynchronous bindings handled by the notifier
can conflict with userspace topology traversal.
Would it be better to call media_device_register() after registering the async
notifier?
> + if (ep_node) {
> + v4l2_async_nf_init(&hdmirx_dev->notifier, &hdmirx_dev->v4l2_dev);
> + hdmirx_dev->notifier.ops = &hdmirx_async_ops;
> +
> + asc = v4l2_async_nf_add_fwnode_remote(&hdmirx_dev->notifier,
> + of_fwnode_handle(ep_node),
> + struct v4l2_async_connection);
> + of_node_put(ep_node);
> +
> + if (IS_ERR(asc)) {
> + ret = PTR_ERR(asc);
> + dev_err_probe(dev, ret, "Failed to add remote fwnode\n");
> + goto err_unreg_media;
> + }
> +
> + ret = v4l2_async_nf_register(&hdmirx_dev->notifier);
> + if (ret) {
> + dev_err_probe(dev, ret, "Failed to register async notifier\n");
> + goto err_cleanup_notifier;
> + }
> + } else {
> + ret = v4l2_device_register_subdev_nodes(&hdmirx_dev->v4l2_dev);
> + if (ret) {
> + dev_err_probe(dev, ret, "Failed to register subdev nodes\n");
> + goto err_unreg_media;
> + }
> + }
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260923-hdmirx-media-v1-0-ea3d77d4a5f3@pengutronix.de?part=4
next prev parent reply other threads:[~2026-09-23 13:58 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-23 13:44 [PATCH 0/9] media: synopsys: hdmirx: support an HDMI bridge in front of the receiver Sascha Hauer
2026-09-23 13:44 ` [PATCH 1/9] media: synopsys: hdmirx: add media device infrastructure Sascha Hauer
2026-09-23 13:44 ` [PATCH 2/9] media: synopsys: hdmirx: add media entity for video capture device Sascha Hauer
2026-09-23 13:44 ` [PATCH 3/9] dt-bindings: media: snps,dw-hdmi-rx: add the source port Sascha Hauer
2026-09-23 16:34 ` Conor Dooley
2026-09-23 13:44 ` [PATCH 4/9] media: synopsys: hdmirx: add async subdevice support Sascha Hauer
2026-09-23 13:58 ` sashiko-bot [this message]
2026-09-23 13:44 ` [PATCH 5/9] media: synopsys: hdmirx: give the signal lock wait a real timeout Sascha Hauer
2026-09-23 13:44 ` [PATCH 6/9] dt-bindings: media: snps,dw-hdmi-rx: make hpd-gpios optional Sascha Hauer
2026-09-23 16:46 ` Conor Dooley
2026-09-24 6:12 ` Sascha Hauer
2026-09-23 13:44 ` [PATCH 7/9] media: synopsys: hdmirx: skip the 5V detect interrupt without a GPIO Sascha Hauer
2026-09-23 13:44 ` [PATCH 8/9] media: v4l2-subdev: notify the bridge when the source power changes Sascha Hauer
2026-09-23 13:44 ` [PATCH 9/9] media: synopsys: hdmirx: get the 5V state from the upstream subdev Sascha Hauer
2026-09-23 14:05 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260923135809.622691F000FF@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=media-ci@linuxtv.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox