[PATCH v8 3/3] arm: dts: altera: add Draeger M48 CPU Module

[Petko Manolov <petko.manolov@konsulko.com>]

M48 is a heterogeneous board made by Draeger that is based on two
independent cpus, that are monitoring each other.  One of them is
imx6, the other is Altera SoCFPGA Cyclone 5.  The latter is booting
independently off qspi.

This one adds the DT for the Altera SoCFPGA part of M48.

Signed-off-by: Petko Manolov <petko.manolov@konsulko.com>
---
 arch/arm/boot/dts/intel/socfpga/Makefile      |  1 +
 .../socfpga/socfpga_cyclone5_draeger_m48.dts  | 91 +++++++++++++++++++
 2 files changed, 92 insertions(+)
 create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_draeger_m48.dts

diff --git a/arch/arm/boot/dts/intel/socfpga/Makefile b/arch/arm/boot/dts/intel/socfpga/Makefile
index 8df0976da01c..cdcea11abdfa 100644
--- a/arch/arm/boot/dts/intel/socfpga/Makefile
+++ b/arch/arm/boot/dts/intel/socfpga/Makefile
@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
 	socfpga_arria10_mercury_aa1_st1_emmc.dtb \
 	socfpga_arria10_mercury_aa1_st1_qspi.dtb \
 	socfpga_arria10_mercury_aa1_st1_sdmmc.dtb \
+	socfpga_cyclone5_draeger_m48.dtb \
 	socfpga_cyclone5_mercury_sa1_pe1_emmc.dtb \
 	socfpga_cyclone5_mercury_sa1_pe1_qspi.dtb \
 	socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dtb \
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_draeger_m48.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_draeger_m48.dts
new file mode 100644
index 000000000000..85daa839c314
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_draeger_m48.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  (C) Copyright 2020 Draeger and Licensors, info@draeger.com
+ */
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Draeger M48 Cyclone V SoC";
+	compatible = "draeger,socfpga-m48", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac0 device tree blob.
+		 */
+		ethernet0 = &gmac0;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	rxc-skew-ps = <1860>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	rxdv-skew-ps = <0>;
+	txc-skew-ps = <900>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	eeprom_mac: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		reg = <0>;
+
+		/* chip select */
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
-- 
2.47.3