From: Amit Sunil Dhamne via B4 Relay <devnull+amitsd.google.com@kernel.org>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Badhri Jagan Sridharan <badhri@google.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org, RD Babiera <rdbabiera@google.com>,
Kyle Tso <kyletso@google.com>,
Amit Sunil Dhamne <amitsd@google.com>
Subject: [PATCH 2/2] usb: typec: tcpm: Allow configuring tSenderResponse via fwnode
Date: Sun, 04 Oct 2026 02:58:29 +0000 [thread overview]
Message-ID: <20261004-tcpm-sender-response-time-v1-2-3f8b43084acc@google.com> (raw)
In-Reply-To: <20261004-tcpm-sender-response-time-v1-0-3f8b43084acc@google.com>
From: Amit Sunil Dhamne <amitsd@google.com>
The USB PD specification defines a range of values for tSenderResponse.
TCPM currently uses a fixed, relaxed value of 60 ms
(PD_T_SENDER_RESPONSE), which may not suit all platforms.
Allow platforms to specify their own tSenderResponse deadline through
the "sender-response-time-ms" fwnode property. Platforms that do not
set the property keep the existing 60 ms default.
Assisted-by: LLM
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
---
drivers/usb/typec/tcpm/tcpm.c | 35 ++++++++++++++++++++++-------------
1 file changed, 22 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 2d6b14aa2085..9f98c87957b1 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -399,12 +399,14 @@ struct pd_revision_info {
* @sink_wait_cap_time: Deadline (in ms) for tTypeCSinkWaitCap timer
* @ps_src_wait_off_time: Deadline (in ms) for tPSSourceOff timer
* @cc_debounce_time: Deadline (in ms) for tCCDebounce timer
+ * @sender_response_time: Deadline (in ms) for tSenderResponse timer
*/
struct pd_timings {
u32 sink_wait_cap_time;
u32 ps_src_off_time;
u32 cc_debounce_time;
u32 snk_bc12_cmpletion_time;
+ u32 sender_response_time;
};
/* Convert microwatt to watt */
@@ -4316,7 +4318,7 @@ static bool tcpm_send_queued_message(struct tcpm_port *port)
} else if (port->pwr_role == TYPEC_SOURCE) {
tcpm_ams_finish(port);
tcpm_set_state(port, HARD_RESET_SEND,
- PD_T_SENDER_RESPONSE);
+ port->timings.sender_response_time);
} else {
tcpm_ams_finish(port);
}
@@ -5549,7 +5551,7 @@ static void run_state_machine(struct tcpm_port *port)
port->caps_count = 0;
port->pd_capable = true;
tcpm_set_state_cond(port, SRC_SEND_CAPABILITIES_TIMEOUT,
- PD_T_SENDER_RESPONSE);
+ port->timings.sender_response_time);
}
break;
case SRC_SEND_CAPABILITIES_TIMEOUT:
@@ -5896,7 +5898,7 @@ static void run_state_machine(struct tcpm_port *port)
tcpm_set_state(port, SNK_WAIT_CAPABILITIES, 0);
} else {
tcpm_set_state_cond(port, hard_reset_state(port),
- PD_T_SENDER_RESPONSE);
+ port->timings.sender_response_time);
}
break;
case SNK_NEGOTIATE_PPS_CAPABILITIES:
@@ -5921,7 +5923,7 @@ static void run_state_machine(struct tcpm_port *port)
tcpm_set_state(port, SNK_READY, 0);
} else {
tcpm_set_state_cond(port, hard_reset_state(port),
- PD_T_SENDER_RESPONSE);
+ port->timings.sender_response_time);
}
break;
case SNK_TRANSITION_SINK:
@@ -6208,7 +6210,8 @@ static void run_state_machine(struct tcpm_port *port)
port->message_id_prime = 0;
port->rx_msgid_prime = -1;
tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET, TCPC_TX_SOP_PRIME);
- tcpm_set_state_cond(port, ready_state(port), PD_T_SENDER_RESPONSE);
+ tcpm_set_state_cond(port, ready_state(port),
+ port->timings.sender_response_time);
} else {
port->message_id = 0;
port->rx_msgid = -1;
@@ -6218,7 +6221,7 @@ static void run_state_machine(struct tcpm_port *port)
tcpm_set_state_cond(port, hard_reset_state(port), 0);
else
tcpm_set_state_cond(port, hard_reset_state(port),
- PD_T_SENDER_RESPONSE);
+ port->timings.sender_response_time);
}
break;
@@ -6226,7 +6229,7 @@ static void run_state_machine(struct tcpm_port *port)
case DR_SWAP_SEND:
tcpm_pd_send_control(port, PD_CTRL_DR_SWAP, TCPC_TX_SOP);
tcpm_set_state_cond(port, DR_SWAP_SEND_TIMEOUT,
- PD_T_SENDER_RESPONSE);
+ port->timings.sender_response_time);
break;
case DR_SWAP_ACCEPT:
tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP);
@@ -6256,7 +6259,7 @@ static void run_state_machine(struct tcpm_port *port)
tcpm_set_state(port, ERROR_RECOVERY, 0);
break;
}
- tcpm_set_state_cond(port, FR_SWAP_SEND_TIMEOUT, PD_T_SENDER_RESPONSE);
+ tcpm_set_state_cond(port, FR_SWAP_SEND_TIMEOUT, port->timings.sender_response_time);
break;
case FR_SWAP_SEND_TIMEOUT:
tcpm_set_state(port, ERROR_RECOVERY, 0);
@@ -6288,7 +6291,7 @@ static void run_state_machine(struct tcpm_port *port)
case PR_SWAP_SEND:
tcpm_pd_send_control(port, PD_CTRL_PR_SWAP, TCPC_TX_SOP);
tcpm_set_state_cond(port, PR_SWAP_SEND_TIMEOUT,
- PD_T_SENDER_RESPONSE);
+ port->timings.sender_response_time);
break;
case PR_SWAP_SEND_TIMEOUT:
tcpm_swap_complete(port, -ETIMEDOUT);
@@ -6385,7 +6388,7 @@ static void run_state_machine(struct tcpm_port *port)
case VCONN_SWAP_SEND:
tcpm_pd_send_control(port, PD_CTRL_VCONN_SWAP, TCPC_TX_SOP);
tcpm_set_state(port, VCONN_SWAP_SEND_TIMEOUT,
- PD_T_SENDER_RESPONSE);
+ port->timings.sender_response_time);
break;
case VCONN_SWAP_SEND_TIMEOUT:
tcpm_swap_complete(port, -ETIMEDOUT);
@@ -6467,7 +6470,7 @@ static void run_state_machine(struct tcpm_port *port)
case GET_STATUS_SEND:
tcpm_pd_send_control(port, PD_CTRL_GET_STATUS, TCPC_TX_SOP);
tcpm_set_state(port, GET_STATUS_SEND_TIMEOUT,
- PD_T_SENDER_RESPONSE);
+ port->timings.sender_response_time);
break;
case GET_STATUS_SEND_TIMEOUT:
tcpm_set_state(port, ready_state(port), 0);
@@ -6475,14 +6478,14 @@ static void run_state_machine(struct tcpm_port *port)
case GET_PPS_STATUS_SEND:
tcpm_pd_send_control(port, PD_CTRL_GET_PPS_STATUS, TCPC_TX_SOP);
tcpm_set_state(port, GET_PPS_STATUS_SEND_TIMEOUT,
- PD_T_SENDER_RESPONSE);
+ port->timings.sender_response_time);
break;
case GET_PPS_STATUS_SEND_TIMEOUT:
tcpm_set_state(port, ready_state(port), 0);
break;
case GET_SINK_CAP:
tcpm_pd_send_control(port, PD_CTRL_GET_SINK_CAP, TCPC_TX_SOP);
- tcpm_set_state(port, GET_SINK_CAP_TIMEOUT, PD_T_SENDER_RESPONSE);
+ tcpm_set_state(port, GET_SINK_CAP_TIMEOUT, port->timings.sender_response_time);
break;
case GET_SINK_CAP_TIMEOUT:
port->sink_cap_done = true;
@@ -8160,6 +8163,12 @@ static void tcpm_fw_get_timings(struct tcpm_port *port, struct fwnode_handle *fw
ret = fwnode_property_read_u32(fwnode, "sink-bc12-completion-time-ms", &val);
if (!ret)
port->timings.snk_bc12_cmpletion_time = val;
+
+ ret = fwnode_property_read_u32(fwnode, "sender-response-time-ms", &val);
+ if (!ret)
+ port->timings.sender_response_time = val;
+ else
+ port->timings.sender_response_time = PD_T_SENDER_RESPONSE;
}
static void tcpm_fw_get_pd_ident(struct tcpm_port *port)
--
2.56.0.rc1.315.gc6ed9934b7-goog
next prev parent reply other threads:[~2026-10-04 2:58 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-04 2:58 [PATCH 0/2] usb: typec: tcpm: Make tSenderResponse timer configurable Amit Sunil Dhamne via B4 Relay
2026-10-04 2:58 ` [PATCH 1/2] dt-bindings: connector: Add time property for tSenderResponse Amit Sunil Dhamne via B4 Relay
2026-10-04 3:05 ` sashiko-bot
2026-10-04 2:58 ` Amit Sunil Dhamne via B4 Relay [this message]
2026-10-09 11:29 ` [PATCH 2/2] usb: typec: tcpm: Allow configuring tSenderResponse via fwnode Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261004-tcpm-sender-response-time-v1-2-3f8b43084acc@google.com \
--to=devnull+amitsd.google.com@kernel.org \
--cc=amitsd@google.com \
--cc=badhri@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=krzk+dt@kernel.org \
--cc=kyletso@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=rdbabiera@google.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox