Devicetree
 help / color / mirror / Atom feed
From: Svyatoslav Ryhel <clamor95@gmail.com>
To: Neil Armstrong <neil.armstrong@linaro.org>,
	Jessica Zhang <jesszhan0024@gmail.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Thierry Reding <thierry.reding@kernel.org>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Mikko Perttunen <mperttunen@nvidia.com>,
	Svyatoslav Ryhel <clamor95@gmail.com>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: [PATCH v2 7/7] drm/panel: Add LG LH400WV3-SD04 MIPI DBI Type B panel driver
Date: Sun,  4 Oct 2026 19:31:14 +0300	[thread overview]
Message-ID: <20261004163114.181800-8-clamor95@gmail.com> (raw)
In-Reply-To: <20261004163114.181800-1-clamor95@gmail.com>

Add a driver for panel used in LG Optimus 2X P990. Panel is 4" WVGA MIPI
DBI Type B linked to DRM encoder via RGB to DBI bridge.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/gpu/drm/panel/Kconfig             |  13 ++
 drivers/gpu/drm/panel/Makefile            |   1 +
 drivers/gpu/drm/panel/panel-lg-lh400wv3.c | 236 ++++++++++++++++++++++
 3 files changed, 250 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-lg-lh400wv3.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index f9e4441dad1c0..0d3845c9bd477 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -553,6 +553,19 @@ config DRM_PANEL_LG_LG4573
 	  Say Y here if you want to enable support for LG4573 RGB panel.
 	  To compile this driver as a module, choose M here.
 
+config DRM_PANEL_LG_LH400WV3
+	tristate "LG LH400WV3 MIPI DBI Type B panel"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	select DRM_MIPI_DBI
+	select VIDEOMODE_HELPERS
+	help
+	  Say Y here if you want to enable support for the LG LH400WV3 MIPI
+	  DBI Type B panel found in the LG Optimus 2X P990 smartphone.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called panel-lg-lh400wv3.
+
 config DRM_PANEL_LG_SW43408
 	tristate "LG SW43408 panel"
 	depends on GPIOLIB
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 414267a49d922..842a2a973777f 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_DRM_PANEL_LINCOLNTECH_LCD197) += panel-lincolntech-lcd197.o
 obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
 obj-$(CONFIG_DRM_PANEL_LG_LD070WX3) += panel-lg-ld070wx3.o
 obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
+obj-$(CONFIG_DRM_PANEL_LG_LH400WV3) += panel-lg-lh400wv3.o
 obj-$(CONFIG_DRM_PANEL_LG_SW43408) += panel-lg-sw43408.o
 obj-$(CONFIG_DRM_PANEL_LXD_M9189A) += panel-lxd-m9189a.o
 obj-$(CONFIG_DRM_PANEL_MAGNACHIP_D53E6EA8966) += panel-magnachip-d53e6ea8966.o
diff --git a/drivers/gpu/drm/panel/panel-lg-lh400wv3.c b/drivers/gpu/drm/panel/panel-lg-lh400wv3.c
new file mode 100644
index 0000000000000..cb2a09699fc6d
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-lg-lh400wv3.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/array_size.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/media-bus-format.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dbi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+
+static const struct regulator_bulk_data lg_lh400wv3_supplies[] = {
+	{ .supply = "avci" }, { .supply = "iovcc" },
+};
+
+struct lg_lh400wv3 {
+	struct drm_panel panel;
+	struct mipi_dbi *dbi;
+
+	struct regulator_bulk_data *supplies;
+	struct gpio_desc *reset_gpio;
+};
+
+static inline struct lg_lh400wv3 *to_lg_lh400wv3(struct drm_panel *panel)
+{
+	return container_of(panel, struct lg_lh400wv3, panel);
+}
+
+#define panel_dbi_command(priv, cmd, seq...) \
+({ \
+	const u8 d[] = { seq }; \
+	struct drm_panel *panel = &(priv)->panel; \
+	struct device *dev = panel->dev; \
+	int ret; \
+	ret = mipi_dbi_command_stackbuf((priv)->dbi, cmd, d, ARRAY_SIZE(d)); \
+	if (ret) \
+		dev_err_ratelimited(dev, "error %d when sending command %#02x\n", ret, cmd); \
+	ret; \
+})
+
+static int lg_lh400wv3_prepare(struct drm_panel *panel)
+{
+	struct lg_lh400wv3 *priv = to_lg_lh400wv3(panel);
+	struct device *dev = panel->dev;
+	int ret;
+
+	priv->dbi = dev_get_drvdata(dev->parent);
+	if (!priv->dbi)
+		return -ENODEV;
+
+	gpiod_set_value_cansleep(priv->reset_gpio, 1);
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(lg_lh400wv3_supplies), priv->supplies);
+	if (ret) {
+		dev_err(dev, "failed to enable power supplies: %d\n", ret);
+		return ret;
+	}
+
+	usleep_range(1000, 2000);
+
+	gpiod_set_value_cansleep(priv->reset_gpio, 0);
+
+	usleep_range(10000, 11000);
+
+	return 0;
+};
+
+static int lg_lh400wv3_enable(struct drm_panel *panel)
+{
+	struct lg_lh400wv3 *priv = to_lg_lh400wv3(panel);
+
+	panel_dbi_command(priv, MIPI_DCS_EXIT_INVERT_MODE);
+	panel_dbi_command(priv, MIPI_DCS_SET_TEAR_ON);
+
+	panel_dbi_command(priv, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_24BIT |
+			  MIPI_DCS_PIXEL_FMT_24BIT << 4);
+
+	panel_dbi_command(priv, 0xb2, 0x00, 0xc8);
+	panel_dbi_command(priv, 0xb3, 0x00);
+	panel_dbi_command(priv, 0xb4, 0x04);
+	panel_dbi_command(priv, 0xb5, 0x42, 0x10, 0x10, 0x00, 0x20);
+	panel_dbi_command(priv, 0xb6, 0x0b, 0x0f, 0x3c, 0x13, 0x13, 0xe8);
+	panel_dbi_command(priv, 0xb7, 0x4c, 0x06, 0x0c, 0x00, 0x00);
+
+	panel_dbi_command(priv, 0xc0, 0x01, 0x11);
+	panel_dbi_command(priv, 0xc3, 0x07, 0x03, 0x04, 0x04, 0x04);
+	panel_dbi_command(priv, 0xc4, 0x12, 0x24, 0x18, 0x18, 0x02, 0x49);
+	panel_dbi_command(priv, 0xc5, 0x65);
+	panel_dbi_command(priv, 0xc6, 0x41, 0x63);
+
+	panel_dbi_command(priv, 0xd0, 0x00, 0x46, 0x74, 0x32, 0x1d, 0x03, 0x51, 0x15, 0x04);
+	panel_dbi_command(priv, 0xd1, 0x00, 0x46, 0x74, 0x32, 0x1d, 0x03, 0x51, 0x15, 0x04);
+	panel_dbi_command(priv, 0xd2, 0x00, 0x46, 0x74, 0x32, 0x1f, 0x03, 0x51, 0x15, 0x04);
+	panel_dbi_command(priv, 0xd3, 0x00, 0x46, 0x74, 0x32, 0x1f, 0x03, 0x51, 0x15, 0x04);
+	panel_dbi_command(priv, 0xd4, 0x01, 0x46, 0x74, 0x25, 0x00, 0x03, 0x51, 0x15, 0x04);
+	panel_dbi_command(priv, 0xd5, 0x01, 0x46, 0x74, 0x25, 0x00, 0x03, 0x51, 0x15, 0x04);
+
+	panel_dbi_command(priv, MIPI_DCS_SET_COLUMN_ADDRESS, 0x00, 0x00, 0x01, 0xdf);
+	panel_dbi_command(priv, MIPI_DCS_SET_PAGE_ADDRESS, 0x00, 0x00, 0x03, 0x1f);
+
+	panel_dbi_command(priv, MIPI_DCS_EXIT_SLEEP_MODE);
+	msleep(120);
+
+	panel_dbi_command(priv, MIPI_DCS_WRITE_MEMORY_START);
+	panel_dbi_command(priv, MIPI_DCS_SET_DISPLAY_ON);
+
+	return 0;
+}
+
+static int lg_lh400wv3_disable(struct drm_panel *panel)
+{
+	struct lg_lh400wv3 *priv = to_lg_lh400wv3(panel);
+
+	panel_dbi_command(priv, MIPI_DCS_SET_DISPLAY_OFF);
+	panel_dbi_command(priv, MIPI_DCS_ENTER_SLEEP_MODE);
+	msleep(150);
+
+	panel_dbi_command(priv, 0xc1, 0x01);
+	usleep_range(10000, 11000);
+
+	return 0;
+};
+
+static int lg_lh400wv3_unprepare(struct drm_panel *panel)
+{
+	struct lg_lh400wv3 *priv = to_lg_lh400wv3(panel);
+
+	gpiod_set_value_cansleep(priv->reset_gpio, 1);
+	regulator_bulk_disable(ARRAY_SIZE(lg_lh400wv3_supplies), priv->supplies);
+
+	msleep(50);
+
+	return 0;
+}
+
+static const struct drm_display_mode lg_lh400wv3_mode = {
+	.clock = (480 + 10 + 10 + 10) * (800 + 4 + 4 + 4) * 60 / 1000,
+	.hdisplay = 480,
+	.hsync_start = 480 + 10,
+	.hsync_end = 480 + 10 + 10,
+	.htotal = 480 + 10 + 10 + 10,
+	.vdisplay = 800,
+	.vsync_start = 800 + 4,
+	.vsync_end = 800 + 4 + 4,
+	.vtotal = 800 + 4 + 4 + 4,
+	.width_mm = 86,
+	.height_mm = 52,
+	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static int lg_lh400wv3_get_modes(struct drm_panel *panel,
+				 struct drm_connector *connector)
+{
+	u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+
+	drm_display_info_set_bus_formats(&connector->display_info,
+					 &bus_format, 1);
+
+	connector->display_info.bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE |
+					    DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE |
+					    DRM_BUS_FLAG_DE_HIGH |
+					    DRM_BUS_FLAG_DATA_LSB_TO_MSB;
+
+	return drm_connector_helper_get_modes_fixed(connector, &lg_lh400wv3_mode);
+}
+
+static const struct drm_panel_funcs lg_lh400wv3_panel_funcs = {
+	.prepare = lg_lh400wv3_prepare,
+	.enable = lg_lh400wv3_enable,
+	.disable = lg_lh400wv3_disable,
+	.unprepare = lg_lh400wv3_unprepare,
+	.get_modes = lg_lh400wv3_get_modes,
+};
+
+static int lg_lh400wv3_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct lg_lh400wv3 *priv;
+	int ret;
+
+	priv = devm_drm_panel_alloc(dev, struct lg_lh400wv3, panel,
+				    &lg_lh400wv3_panel_funcs, DRM_MODE_CONNECTOR_DPI);
+	if (IS_ERR(priv))
+		return PTR_ERR(priv);
+
+	ret = devm_regulator_bulk_get_const(dev, ARRAY_SIZE(lg_lh400wv3_supplies),
+					    lg_lh400wv3_supplies, &priv->supplies);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get supplies\n");
+
+	priv->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(priv->reset_gpio),
+				     "Failed to get reset gpio\n");
+
+	ret = drm_panel_of_backlight(&priv->panel);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+	ret = devm_drm_panel_add(dev, &priv->panel);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to add panel\n");
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+}
+
+static const struct of_device_id lg_lh400wv3_of_match[] = {
+	{ .compatible = "lg,lh400wv3-sd04" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, lg_lh400wv3_of_match);
+
+static struct platform_driver lg_lh400wv3_driver = {
+	.driver = {
+		.name = "panel-lg-lh400wv3",
+		.of_match_table = lg_lh400wv3_of_match,
+	},
+	.probe = lg_lh400wv3_probe,
+};
+module_platform_driver(lg_lh400wv3_driver);
+
+MODULE_AUTHOR("Svyatoslav Ryhel <clamor95@gmail.com>");
+MODULE_DESCRIPTION("LG LH400WV3-SD04 MIPI DBI Type B panel driver");
+MODULE_LICENSE("GPL");
-- 
2.53.0


      parent reply	other threads:[~2026-10-04 16:31 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-04 16:31 [PATCH v2 0/7] drm/tegra: Add support for Tegra20/Tegra30 8-bit CPU interface Svyatoslav Ryhel
2026-10-04 16:31 ` [PATCH v2 1/7] drm/tegra: dc: Expand available registers layouts Svyatoslav Ryhel
2026-10-04 16:31 ` [PATCH v2 2/7] drm/tegra: rgb: Parameterize configuration based on bus flags Svyatoslav Ryhel
2026-10-04 16:41   ` sashiko-bot
2026-10-04 16:31 ` [PATCH v2 3/7] dt-bindings: display: tegra: Document 8-bit CPU parallel interface Svyatoslav Ryhel
2026-10-04 16:41   ` sashiko-bot
2026-10-05 13:30   ` Rob Herring (Arm)
2026-10-04 16:31 ` [PATCH v2 4/7] drm/tegra: Add support for 8-bit CPU interface Svyatoslav Ryhel
2026-10-04 16:44   ` sashiko-bot
2026-10-05 14:29   ` kernel test robot
2026-10-06  3:42   ` kernel test robot
2026-10-04 16:31 ` [PATCH v2 5/7] dt-bindings: display: panel: Document Hitachi TX10D07VM0BAA and LG LH400WV3 panels Svyatoslav Ryhel
2026-10-04 16:31 ` [PATCH v2 6/7] drm/panel: Add Hitachi TX10D07VM0BAA MIPI DBI Type B panel driver Svyatoslav Ryhel
2026-10-04 16:31 ` Svyatoslav Ryhel [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261004163114.181800-8-clamor95@gmail.com \
    --to=clamor95@gmail.com \
    --cc=airlied@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jesszhan0024@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mperttunen@nvidia.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=thierry.reding@kernel.org \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox