Re: [PATCH 1/2] dt-bindings: net: can: bosch,cc770: Convert to DT schema

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 1197 bytes --]

On Fri, Oct 09, 2026 at 06:55:56PM +0800, Quchaosheng wrote:
> From: Chaosheng Qu <quchaosheng000406@163.com>
> 
> Convert the Bosch CC770 and Intel AN82527 controller binding from
> free-form text to DT schema, and reference the common can-controller.yaml
> schema.
> 
> The driver reads one more property than the old text documented:
> "bosch,no-comperator-bypass", which is checked at cc770_platform.c:94.
> It is documented here so that it can be used. Its spelling is kept as
> the driver spells it.
> 
> The interrupt is obtained with platform_get_irq(), so interrupts is
> required. The register window is described with the chip select, the
> address offset and the size, as the original text and the existing
> device trees on the local bus use three cells. The size is usually 0x80.
> 
> unevaluatedProperties is used rather than additionalProperties so that
> properties provided by can-controller.yaml, such as termination-gpios,
> remain usable.
> 
> Assisted-by: LLM
> Signed-off-by: Chaosheng Qu <quchaosheng000406@163.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]