From: Jason Yang <jason98166@gmail.com>
To: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Guochun Huang <hero.huang@rock-chips.com>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: Michael Riesch <michael.riesch@collabora.com>,
Sebastian Reichel <sebastian.reichel@collabora.com>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-kernel@vger.kernel.org, Jason Yang <jason98166@gmail.com>
Subject: [PATCH v5 5/8] phy: rockchip-samsung-dcphy: Add a second PHY for the receiver
Date: Fri, 16 Oct 2026 16:56:39 +0800 [thread overview]
Message-ID: <20261016-dcphy-rx-v1-v5-5-e63b49eabe2d@gmail.com> (raw)
In-Reply-To: <20261016-dcphy-rx-v1-v5-0-e63b49eabe2d@gmail.com>
Give the receiver a struct phy of its own, with its own phy_ops and its
own samsung_mipi_phy for the state the two do not share.
of_xlate() takes the direction from the second cell and falls back to
the transmitter for a single-cell provider, so existing device trees
keep working. It now rejects an unknown value in either cell, and a mix
of D-PHY and C-PHY consumers, which the TRM does not support [1].
The receiver's callbacks return -EOPNOTSUPP until its bring-up is added
in the next change.
[1] RK3588 TRM: section 22.1 (overview)
Assisted-by: LLM
Signed-off-by: Jason Yang <jason98166@gmail.com>
---
drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c | 69 +++++++++++++++++++++--
1 file changed, 63 insertions(+), 6 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
index e4293c8d2b29..316d4c4d49c1 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
@@ -296,6 +296,8 @@ struct samsung_mipi_dcphy {
struct reset_control *apb_rst;
struct reset_control *grf_apb_rst;
struct samsung_mipi_phy tx;
+ struct samsung_mipi_phy rx;
+ /* PHY mode, PHY_TYPE_DPHY or PHY_TYPE_CPHY. */
u8 type;
const struct samsung_mipi_dcphy_plat_data *pdata;
@@ -1511,6 +1513,22 @@ static int samsung_mipi_dcphy_exit(struct phy *phy)
return 0;
}
+static int samsung_mipi_dcphy_rx_configure(struct phy *phy,
+ union phy_configure_opts *opts)
+{
+ return -EOPNOTSUPP;
+}
+
+static int samsung_mipi_dcphy_rx_power_on(struct phy *phy)
+{
+ return -EOPNOTSUPP;
+}
+
+static int samsung_mipi_dcphy_rx_power_off(struct phy *phy)
+{
+ return -EOPNOTSUPP;
+}
+
static const struct phy_ops samsung_mipi_dcphy_tx_ops = {
.configure = samsung_mipi_dcphy_tx_configure,
.power_on = samsung_mipi_dcphy_tx_power_on,
@@ -1520,6 +1538,15 @@ static const struct phy_ops samsung_mipi_dcphy_tx_ops = {
.owner = THIS_MODULE,
};
+static const struct phy_ops samsung_mipi_dcphy_rx_ops = {
+ .configure = samsung_mipi_dcphy_rx_configure,
+ .power_on = samsung_mipi_dcphy_rx_power_on,
+ .power_off = samsung_mipi_dcphy_rx_power_off,
+ .init = samsung_mipi_dcphy_init,
+ .exit = samsung_mipi_dcphy_exit,
+ .owner = THIS_MODULE,
+};
+
static const struct regmap_config samsung_mipi_dcphy_regmap_config = {
.name = "dcphy",
.reg_bits = 32,
@@ -1532,19 +1559,42 @@ static struct phy *samsung_mipi_dcphy_xlate(struct device *dev,
const struct of_phandle_args *args)
{
struct samsung_mipi_dcphy *samsung = dev_get_drvdata(dev);
+ /* Device trees without the second cell describe the transmitter. */
+ u32 direction = PHY_DIRECTION_TX;
+ u32 type;
- if (args->args_count != 1) {
+ if (args->args_count < 1 || args->args_count > 2) {
dev_err(dev, "invalid number of arguments\n");
return ERR_PTR(-EINVAL);
}
- if (samsung->type != PHY_NONE && samsung->type != args->args[0])
- dev_warn(dev, "phy type select %d overwriting type %d\n",
- args->args[0], samsung->type);
+ type = args->args[0];
+ if (type != PHY_TYPE_DPHY && type != PHY_TYPE_CPHY) {
+ dev_err(dev, "invalid phy type %u\n", type);
+ return ERR_PTR(-EINVAL);
+ }
- samsung->type = args->args[0];
+ if (args->args_count == 2)
+ direction = args->args[1];
- return samsung->tx.phy;
+ if (direction != PHY_DIRECTION_TX && direction != PHY_DIRECTION_RX) {
+ dev_err(dev, "invalid direction %u\n", direction);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /*
+ * The TRM (section 22.1) does not support the transmitter and the
+ * receiver running in different modes, so the mode belongs to the
+ * block.
+ */
+ if (samsung->type != PHY_NONE && samsung->type != type) {
+ dev_err(dev, "phy type %u conflicts with type %u already selected\n",
+ type, samsung->type);
+ return ERR_PTR(-EINVAL);
+ }
+ samsung->type = type;
+
+ return direction == PHY_DIRECTION_RX ? samsung->rx.phy : samsung->tx.phy;
}
static int samsung_mipi_dcphy_probe(struct platform_device *pdev)
@@ -1620,6 +1670,13 @@ static int samsung_mipi_dcphy_probe(struct platform_device *pdev)
phy_set_drvdata(samsung->tx.phy, samsung);
+ samsung->rx.phy = devm_phy_create(dev, NULL, &samsung_mipi_dcphy_rx_ops);
+ if (IS_ERR(samsung->rx.phy))
+ return dev_err_probe(dev, PTR_ERR(samsung->rx.phy),
+ "Failed to create MIPI DC-PHY receiver\n");
+
+ phy_set_drvdata(samsung->rx.phy, samsung);
+
phy_provider = devm_of_phy_provider_register(dev, samsung_mipi_dcphy_xlate);
if (IS_ERR(phy_provider))
return dev_err_probe(dev, PTR_ERR(phy_provider),
--
2.43.0
next prev parent reply other threads:[~2026-10-16 8:57 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-16 8:56 [PATCH v5 0/8] phy: rockchip-samsung-dcphy: Add the MIPI D-PHY receiver Jason Yang
2026-10-16 8:56 ` [PATCH v5 1/8] dt-bindings: phy: Add PHY_DIRECTION_TX/RX definitions Jason Yang
2026-10-16 10:38 ` Bryan O'Donoghue
2026-10-16 8:56 ` [PATCH v5 2/8] dt-bindings: phy: rockchip,rk3588-mipi-dcphy: Add a cell to select TX or RX Jason Yang
2026-10-16 10:43 ` Bryan O'Donoghue
2026-10-16 14:01 ` Rob Herring
2026-10-16 8:56 ` [PATCH v5 3/8] phy: rockchip-samsung-dcphy: Move block-level setup to runtime resume Jason Yang
2026-10-16 9:09 ` sashiko-bot
2026-10-16 10:46 ` Bryan O'Donoghue
2026-10-16 8:56 ` [PATCH v5 4/8] phy: rockchip-samsung-dcphy: Name the transmitter helpers and ops Jason Yang
2026-10-16 9:07 ` sashiko-bot
2026-10-16 8:56 ` Jason Yang [this message]
2026-10-16 8:56 ` [PATCH v5 6/8] phy: rockchip-samsung-dcphy: Add MIPI D-PHY receiver support Jason Yang
2026-10-16 8:56 ` [PATCH v5 7/8] arm64: dts: rockchip: use two phy cells for the rk3588 mipi dcphys Jason Yang
2026-10-16 8:56 ` [PATCH v5 8/8] arm64: dts: rockchip: add mipi csi-2 receiver nodes for the dcphys on rk3588 Jason Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261016-dcphy-rx-v1-v5-5-e63b49eabe2d@gmail.com \
--to=jason98166@gmail.com \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=hero.huang@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mani@kernel.org \
--cc=michael.riesch@collabora.com \
--cc=neil.armstrong@linaro.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox