[PATCH v2 3/6] arm64: tegra: Add the fuse clock to the Tegra132 GPU

[Sasha Levin <sashal@kernel.org>]

The GPU needs the fuse clock running while it is powered: the GM20B
on Tegra210 often fails to initialize without it, and the GK20A on
Tegra132 is expected to have the same requirement. Describe the fuse
clock so that the GPU driver can keep it enabled.

Assisted-by: LLM
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra132.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 26cd11a8a4a12..30f0d87aa70c2 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -195,8 +195,9 @@ gpu@57000000 {
 			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "stall", "nonstall";
 		clocks = <&tegra_car TEGRA124_CLK_GPU>,
-			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
-		clock-names = "gpu", "pwr";
+			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>,
+			 <&tegra_car TEGRA124_CLK_FUSE>;
+		clock-names = "gpu", "pwr", "fuse";
 		resets = <&tegra_car 184>;
 		reset-names = "gpu";
 		status = "disabled";
-- 
2.53.0