[PATCH v2 4/6] arm64: tegra: Add the fuse clock to the Tegra186 GPU

[Sasha Levin <sashal@kernel.org>]

The GPU needs the fuse clock running while it is powered: Tegra194
already describes it for its GV11B, and the GM20B on Tegra210 often
fails to initialize without it, so the GP10B on Tegra186 is expected
to need it as well. Describe the fuse clock so that the GPU driver
can keep it enabled.

Assisted-by: LLM
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 705af0373a090..7d2dd0713de5c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -1883,8 +1883,9 @@ gpu@17000000 {
 		interrupt-names = "stall", "nonstall";
 
 		clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
-			 <&bpmp TEGRA186_CLK_GPU>;
-		clock-names = "gpu", "pwr";
+			 <&bpmp TEGRA186_CLK_GPU>,
+			 <&bpmp TEGRA186_CLK_FUSE>;
+		clock-names = "gpu", "pwr", "fuse";
 		resets = <&bpmp TEGRA186_RESET_GPU>;
 		reset-names = "gpu";
 		status = "disabled";
-- 
2.53.0