From: Luka Panio <lukapanio@gmail.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Henrik Rydberg <rydberg@bitmath.org>,
Douglas Anderson <dianders@chromium.org>,
linux-input@vger.kernel.org, devicetree@vger.kernel.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
Luka Panio <lukapanio@gmail.com>
Subject: [PATCH 0/7] Input: edt-ft5x06 - add SPI transport and FocalTech FT8722 support
Date: Sat, 17 Oct 2026 16:07:48 +0200 [thread overview]
Message-ID: <20261017140827.290666-1-lukapanio@gmail.com> (raw)
The FocalTech FT8722 is a touch and display driver (TDDI) found in the
Nexphone (QCM6490). Its touch controller speaks the usual FocalTech
register protocol handled by edt-ft5x06, but it is connected over SPI,
has no flash and runs its firmware from RAM, and shares its power and
reset with the display panel.
This series:
- splits the bus independent core of edt-ft5x06 from the I2C driver
(patch 1) and moves the controller bring-up into a helper (patch 2),
- adds an optional per-chip boot hook, used to download the firmware
after every reset (patch 3), and a per-chip touch data register
(patch 4),
- documents the FT8722 touch controller as focaltech,ft8722-ts, keeping
it distinct from the display side of the chip (patch 5),
- adds an SPI transport with the FT8722 firmware loader (patch 6),
- lets the driver follow a DRM panel, like i2c-hid does, so the touch
controller is powered down and re-initialised together with the panel
(patch 7).
Tested on the Nexphone by Nex Computers. A board DTS using it will
follow separately.
Luka Panio (7):
Input: edt-ft5x06 - split the bus independent core from the I2C driver
Input: edt-ft5x06 - move the controller bring-up into a helper
Input: edt-ft5x06 - add an optional controller boot hook
Input: edt-ft5x06 - allow a chip specific touch data register
dt-bindings: input: touchscreen: edt-ft5x06: Add FocalTech FT8722
Input: edt-ft5x06 - add SPI transport and FT8722 support
Input: edt-ft5x06 - support following a DRM panel
.../input/touchscreen/edt-ft5x06.yaml | 37 ++
drivers/input/touchscreen/Kconfig | 15 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/edt-ft5x06-spi.c | 475 ++++++++++++++
drivers/input/touchscreen/edt-ft5x06.c | 585 ++++++++++++------
drivers/input/touchscreen/edt-ft5x06.h | 33 +
6 files changed, 957 insertions(+), 189 deletions(-)
create mode 100644 drivers/input/touchscreen/edt-ft5x06-spi.c
create mode 100644 drivers/input/touchscreen/edt-ft5x06.h
base-commit: d419d682257d813f6cb7a28e42b35d0edf4ad038
--
2.55.0
next reply other threads:[~2026-10-17 14:08 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-17 14:07 Luka Panio [this message]
2026-10-17 14:07 ` [PATCH 1/7] Input: edt-ft5x06 - split the bus independent core from the I2C driver Luka Panio
2026-10-17 14:07 ` [PATCH 2/7] Input: edt-ft5x06 - move the controller bring-up into a helper Luka Panio
2026-10-17 14:16 ` sashiko-bot
2026-10-17 14:07 ` [PATCH 3/7] Input: edt-ft5x06 - add an optional controller boot hook Luka Panio
2026-10-17 14:07 ` [PATCH 4/7] Input: edt-ft5x06 - allow a chip specific touch data register Luka Panio
2026-10-17 14:07 ` [PATCH 5/7] dt-bindings: input: touchscreen: edt-ft5x06: Add FocalTech FT8722 Luka Panio
2026-10-17 14:07 ` [PATCH 6/7] Input: edt-ft5x06 - add SPI transport and FT8722 support Luka Panio
2026-10-17 14:29 ` sashiko-bot
2026-10-17 14:07 ` [PATCH 7/7] Input: edt-ft5x06 - support following a DRM panel Luka Panio
2026-10-17 14:30 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261017140827.290666-1-lukapanio@gmail.com \
--to=lukapanio@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=dmitry.torokhov@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzk+dt@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=rydberg@bitmath.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox