[PATCH v2 1/2] riscv: dts: spacemit: k1: mark boot-critical SoC nodes bootph-pre-ram

[Hung-Chun Tseng <alan.tseng.cs@gmail.com>]

A bootloader SPL that follows the K1 BootROM runs from SRAM before DRAM
is up. It needs the root clocks, the clock and reset controllers, the
console UART, the I2C bus of the PMIC (i2c8, which every K1 board
uses), and the boot media controllers: SD (sdhci0), eMMC and QSPI NOR.
Mark these nodes bootph-pre-ram so an SPL can use the upstream device
tree as is, instead of carrying the tags in per-board overlays.

These are the SoC nodes that the mainline U-Boot SPL for K1 currently
tags in its board -u-boot.dtsi files.

Assisted-by: claude-opus-5-5 dtbs_check
Signed-off-by: Hung-Chun Tseng <alan.tseng.cs@gmail.com>
---
 arch/riscv/boot/dts/spacemit/k1.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index 3fabfd341..5d9550272 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -322,6 +322,7 @@ cluster1_l2_cache: l2-cache1 {
 	clocks {
 		vctcxo_1m: clock-1m {
 			compatible = "fixed-clock";
+			bootph-pre-ram;
 			clock-frequency = <1000000>;
 			clock-output-names = "vctcxo_1m";
 			#clock-cells = <0>;
@@ -329,6 +330,7 @@ vctcxo_1m: clock-1m {
 
 		vctcxo_24m: clock-24m {
 			compatible = "fixed-clock";
+			bootph-pre-ram;
 			clock-frequency = <24000000>;
 			clock-output-names = "vctcxo_24m";
 			#clock-cells = <0>;
@@ -336,6 +338,7 @@ vctcxo_24m: clock-24m {
 
 		vctcxo_3m: clock-3m {
 			compatible = "fixed-clock";
+			bootph-pre-ram;
 			clock-frequency = <3000000>;
 			clock-output-names = "vctcxo_3m";
 			#clock-cells = <0>;
@@ -343,6 +346,7 @@ vctcxo_3m: clock-3m {
 
 		osc_32k: clock-32k {
 			compatible = "fixed-clock";
+			bootph-pre-ram;
 			clock-frequency = <32768>;
 			clock-output-names = "osc_32k";
 			#clock-cells = <0>;
@@ -586,6 +590,7 @@ i2c5: i2c@d4013800 {
 		syscon_apbc: system-controller@d4015000 {
 			compatible = "spacemit,k1-syscon-apbc";
 			reg = <0x0 0xd4015000 0x0 0x1000>;
+			bootph-pre-ram;
 			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
 				 <&vctcxo_24m>;
 			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
@@ -726,6 +731,7 @@ i2c7: i2c@d401d000 {
 		i2c8: i2c@d401d800 {
 			compatible = "spacemit,k1-i2c";
 			reg = <0x0 0xd401d800 0x0 0x38>;
+			bootph-pre-ram;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&syscon_apbc CLK_TWSI8>,
@@ -857,6 +863,7 @@ pwm19: pwm@d4022c00 {
 		syscon_mpmu: system-controller@d4050000 {
 			compatible = "spacemit,k1-syscon-mpmu";
 			reg = <0x0 0xd4050000 0x0 0x209c>;
+			bootph-pre-ram;
 			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
 				 <&vctcxo_24m>;
 			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
@@ -869,6 +876,7 @@ syscon_mpmu: system-controller@d4050000 {
 		pll: clock-controller@d4090000 {
 			compatible = "spacemit,k1-pll";
 			reg = <0x0 0xd4090000 0x0 0x1000>;
+			bootph-pre-ram;
 			clocks = <&vctcxo_24m>;
 			spacemit,mpmu = <&syscon_mpmu>;
 			#clock-cells = <1>;
@@ -877,6 +885,7 @@ pll: clock-controller@d4090000 {
 		syscon_apmu: system-controller@d4282800 {
 			compatible = "spacemit,k1-syscon-apmu";
 			reg = <0x0 0xd4282800 0x0 0x400>;
+			bootph-pre-ram;
 			clocks = <&osc_32k>, <&vctcxo_1m>, <&vctcxo_3m>,
 				 <&vctcxo_24m>;
 			clock-names = "osc", "vctcxo_1m", "vctcxo_3m",
@@ -956,6 +965,7 @@ uart0: serial@d4017000 {
 				compatible = "spacemit,k1-uart",
 					     "intel,xscale-uart";
 				reg = <0x0 0xd4017000 0x0 0x100>;
+				bootph-pre-ram;
 				clocks = <&syscon_apbc CLK_UART0>,
 					 <&syscon_apbc CLK_UART0_BUS>;
 				clock-names = "core", "bus";
@@ -1085,6 +1095,7 @@ qspi: spi@d420c000 {
 				reg = <0x0 0xd420c000 0x0 0x1000>,
 				      <0x0 0xb8000000 0x0 0xc00000>;
 				reg-names = "QuadSPI", "QuadSPI-memory";
+				bootph-pre-ram;
 				clocks = <&syscon_apmu CLK_QSPI_BUS>,
 					 <&syscon_apmu CLK_QSPI>;
 				clock-names = "qspi_en", "qspi";
@@ -1328,6 +1339,7 @@ usb_dwc3: usb@c0a00000 {
 			sdhci0: mmc@d4280000 {
 				compatible = "spacemit,k1-sdhci";
 				reg = <0x0 0xd4280000 0x0 0x200>;
+				bootph-pre-ram;
 				clocks = <&syscon_apmu CLK_SDH_AXI>,
 					 <&syscon_apmu CLK_SDH0>;
 				clock-names = "core", "io";
@@ -1341,6 +1353,7 @@ sdhci0: mmc@d4280000 {
 			emmc: mmc@d4281000 {
 				compatible = "spacemit,k1-sdhci";
 				reg = <0x0 0xd4281000 0x0 0x200>;
+				bootph-pre-ram;
 				clocks = <&syscon_apmu CLK_SDH_AXI>,
 					 <&syscon_apmu CLK_SDH2>;
 				clock-names = "core", "io";
-- 
2.43.0