[PATCH 5/6] arm64: dts: qcom: sm8250-hdk: Add the QCA6390 NIC

[ShiTou Hong <redstone.dcity@gmail.com>]

From: redstonee <1516235445@qq.com>

The sm8250-hdk has a QCA6390 WiFi/BT module.

This commit enables the UART port of BT; adds the QCA6390 PMU node,
the wifi node of pcieport0, the missing regulator of PM8009
which is used by QCA6390, the pinctrl of QCA6390 enable pins.

Signed-off-by: ShiTou Hong <dc_redstone@outlook.com>
---
 arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 125 ++++++++++++++++++++++++
 1 file changed, 125 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
index 77273b6c2..eb899c92f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
@@ -32,6 +32,13 @@ vph_pwr: vph-pwr-regulator {
 		regulator-max-microvolt = <3700000>;
 	};
 
+	vreg_3p3: vreg-3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	vreg_s4a_1p8: pm8150-s4 {
 		compatible = "regulator-fixed";
 		regulator-name = "vreg_s4a_1p8";
@@ -87,6 +94,67 @@ hdmi_con: endpoint {
 			};
 		};
 	};
+
+	qca6390-pmu {
+		compatible = "qcom,qca6390-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&qca6390_pins>;
+
+		vddaon-supply = <&vreg_s6a_0p95>;
+		vddpmu-supply = <&vreg_s2f_0p95>;
+		vddrfa0p95-supply = <&vreg_s2f_0p95>;
+		vddrfa1p3-supply = <&vreg_s8c_1p3>;
+		vddrfa1p9-supply = <&vreg_s5a_1p9>;
+		vddpcie1p3-supply = <&vreg_s8c_1p3>;
+		vddpcie1p9-supply = <&vreg_s5a_1p9>;
+		vddio-supply = <&vreg_s4a_1p8>;
+
+		wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -345,6 +413,13 @@ regulators-2 {
 		vdd-l5-l6-supply = <&vreg_bob>;
 		vdd-l7-supply = <&vreg_s4a_1p8>;
 
+		vreg_s2f_0p95: smps2 {
+			regulator-name = "vreg_s2f_0p95";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
 		vreg_l1f_cam_dvdd1_1p1: ldo1 {
 			regulator-name = "vreg_l1f_cam_dvdd1_1p1";
 			regulator-min-microvolt = <1104000>;
@@ -450,6 +525,39 @@ rst-pins {
 			output-high;
 		};
 	};
+
+	qca6390_pins: qca6390-pins {
+		wlan-enable-pins {
+			pins = "gpio20";
+			function = "gpio";
+			drive-strength = <16>;
+			output-low;
+			bias-pull-up;
+		};
+
+		bt-enable-pins {
+			pins = "gpio21";
+			function = "gpio";
+			drive-strength = <16>;
+			output-low;
+			bias-pull-up;
+		};
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6390-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+	};
 };
 
 &uart12 {
@@ -723,6 +831,23 @@ &pcie0_phy {
 	status = "okay";
 };
 
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1101";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pcie2 {
 	status = "okay";
 	vddpe-3v3-supply = <&vreg_3p3>;
-- 
2.47.3