[PATCH] arm64: dts: qcom: ipq6018: Drop undocumented 'qcom,ipq6018-wcss-pil'

[PATCH] arm64: dts: qcom: ipq6018: Drop undocumented 'qcom,ipq6018-wcss-pil'

[Rob Herring (Arm)]

The 'qcom,ipq6018-wcss-pil' is not documented nor used by any driver in
the kernel, so remove it.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
Alternatively, remoteproc/qcom,q6v5.txt can be converted and this
compatible added. I have a WIP patch if someone wants to pick that up.
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 49 ---------------------------
 1 file changed, 49 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 0701517275d4..e8870351c34a 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -823,55 +823,6 @@ frame@b128000 {
 			};
 		};
 
-		q6v5_wcss: remoteproc@cd00000 {
-			compatible = "qcom,ipq6018-wcss-pil";
-			reg = <0x0 0x0cd00000 0x0 0x4040>,
-			      <0x0 0x004ab000 0x0 0x20>;
-			reg-names = "qdsp6",
-				    "rmb";
-			interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
-					      <&wcss_smp2p_in 0 0>,
-					      <&wcss_smp2p_in 1 0>,
-					      <&wcss_smp2p_in 2 0>,
-					      <&wcss_smp2p_in 3 0>;
-			interrupt-names = "wdog",
-					  "fatal",
-					  "ready",
-					  "handover",
-					  "stop-ack";
-
-			resets = <&gcc GCC_WCSSAON_RESET>,
-				 <&gcc GCC_WCSS_BCR>,
-				 <&gcc GCC_WCSS_Q6_BCR>;
-
-			reset-names = "wcss_aon_reset",
-				      "wcss_reset",
-				      "wcss_q6_reset";
-
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			clock-names = "prng";
-
-			qcom,halt-regs = <&tcsr 0x18000 0x1b000 0xe000>;
-
-			qcom,smem-states = <&wcss_smp2p_out 0>,
-					   <&wcss_smp2p_out 1>;
-			qcom,smem-state-names = "shutdown",
-						"stop";
-
-			memory-region = <&q6_region>;
-
-			glink-edge {
-				interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>;
-				label = "rtr";
-				qcom,remote-pid = <1>;
-				mboxes = <&apcs_glb 8>;
-
-				qrtr_requests {
-					qcom,glink-channels = "IPCRTR";
-				};
-			};
-		};
-
 		pcie0: pcie@20000000 {
 			compatible = "qcom,pcie-ipq6018";
 			reg = <0x0 0x20000000 0x0 0xf1d>,
-- 
2.53.0