[PATCH v3 7/9] arm64: dts: qcom: pm660l: add analog audio codec

[Richard Acayan <mailingradian@gmail.com>]

The PM660L analog audio codec (PMIC revision 4) controls the headphone
jack, and optionally the earpiece and speaker, at the vendor's decision.
Add the analog audio codec.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 arch/arm64/boot/dts/qcom/pm660l.dtsi | 37 ++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
index 3f8b9eafe164..608c1c2120c9 100644
--- a/arch/arm64/boot/dts/qcom/pm660l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -87,6 +87,43 @@ pm660l_wled: leds@d800 {
 			status = "disabled";
 		};
 
+		pm660l_codec: audio-codec@f000 {
+			compatible = "qcom,pm660l-wcd-analog-codec",
+				     "qcom,pm8953-wcd-analog-codec";
+			reg = <0xf000>;
+			interrupts = <0x3 0xf0 0x0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xf0 0x1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xf0 0x2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xf0 0x3 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xf0 0x4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xf0 0x5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xf0 0x6 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xf0 0x7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xf1 0x0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xf1 0x1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xf1 0x2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xf1 0x3 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xf1 0x4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xf1 0x5 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "cdc_spk_cnp_int",
+					  "cdc_spk_clip_int",
+					  "cdc_spk_ocp_int",
+					  "mbhc_ins_rem_det1",
+					  "mbhc_but_rel_det",
+					  "mbhc_but_press_det",
+					  "mbhc_ins_rem_det",
+					  "mbhc_switch_int",
+					  "cdc_ear_ocp_int",
+					  "cdc_hphr_ocp_int",
+					  "cdc_hphl_ocp_det",
+					  "cdc_ear_cnp_int",
+					  "cdc_hphr_cnp_int",
+					  "cdc_hphl_cnp_int";
+			sound-name-prefix = "Analog";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
 		pm660l_spmi_regulators: regulators {
 			compatible = "qcom,pm660l-regulators";
 		};
-- 
2.56.0