* [PATCH v3 0/8] Add support for MIPS P8700
@ 2026-11-16 11:55 Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 1/8] dt-bindings: riscv: cpus: add mips,p8700 Aleksa Paunovic via B4 Relay
` (7 more replies)
0 siblings, 8 replies; 12+ messages in thread
From: Aleksa Paunovic via B4 Relay @ 2026-11-16 11:55 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Djordje Todorovic,
Anup Patel, Thomas Gleixner, Radu Rendec, Inochi Amaoto,
Daniel Lezcano
Cc: devicetree, linux-kernel, Paul Walmsley, Palmer Dabbelt,
Conor Dooley, linux-riscv, Vladimir Kondratiev, Paul Walmsley,
Palmer Dabbelt, Joel Stanley, Aleksa Paunovic, Conor Dooley
The MIPS P8700 is a multi-core RISC-V microprocessor system, supporting
both single-cluster and multi-cluster configurations. [1]
This series adds full description of the platform,
including the Boston FPGA board configured with a P8700 bitfile.
The P8700 cores support the RV64GCZba_Zbb (G = IMAFD) Standard ISA,
with a caveat: the A extension is only partially supported, and all ZAAMO
extension instructions are emulated on the SBI level. The device tree
intentionally does not reflect this fact. Vladimir Kondratiev's series
improves performance by directly substituting AMO instructions with LR/SC. [4]
The two patchsets do not depend on one another.
The board itself is the same board as 'img,boston', configured with a different
bitfile [3]. The Boston board has been supported since commit 6e62a888029b
("MIPS: generic: Support MIPS Boston development boards") (thanks to Maciej for finding the ref).
I tested this series both on QEMU and a Boston board
configured with a single P8700 CPU,
after applying the necessary U-Boot changes.
We are planning on upstreaming these as well.
Following the discussion in [2], I decided to drop the 'gf' prefix for all compatibles
and to rework the aclint-mtimer binding.
Links:
[1] https://mips.com/wp-content/uploads/2025/11/P8700-F_Programmers_Reference_Manual-TM.pdf
[2] https://lore.kernel.org/linux-riscv/20261109051050.105623-5-joel@jms.id.au/
[3] https://training.mips.com/cps_mips/Examples/MD00901_Boot-MIPS_Example_Boot_Code_for_MIPS_Cores.pdf
[4] https://lore.kernel.org/all/20261026-lrsc-only-v3-0-ec29c8190fb1@mobileye.com/
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
---
Changes in v3:
- Drop the 'gf' vendor prefix patch. The prefix isn't used anywhere.
- Replace 'gf,mips-p8700-*' compatibles with 'mips,p8700-*'
to match those already present in OpenSBI.
Other compatibles are also renamed for consistency.
Match the directory structure and binding names,
by replacing 'gf' with 'mips' everywhere.
- Add a MAINTAINERS entry.
- Change the `aclint-mtimer` binding, reversing the decision made in v2
and putting 'mtime' first when both 'mtime' and 'mtimecmp' are present.
- Link to v2: https://lore.kernel.org/r/20261103-p8700-dts-v2-0-3ac5d49f2c37@htecgroup.com
Changes in v2:
- Patch 1: Replace "MIPS Technology" with "MIPS Technologies".
- Patch 3: Name the FPGA used and add the versioned bitfile compatible.
- Patch 5: Drop hart indexes from MSWI.
- Patch 6: Swap mtimecmp and mtime, require reg-names both for mtime and mtimecmp on P8700.
- Original patch 7: Dropped.
- Patch 7 (previously 8): Remove additional harts that are not
present in the bitfile I have. Reflect changes made in patches 3, 5 and 6.
Remove riscv,cbom-block-size. Drop undocumented compatibles. Other minor changes.
- Link to v1: https://lore.kernel.org/r/20260914-p8700-dts-v1-0-3267f14ebce1@htecgroup.com
---
Aleksa Paunovic (8):
dt-bindings: riscv: cpus: add mips,p8700
dt-bindings: riscv: Add MIPS Boston board compatible
dt-bindings: interrupt-controller: Add MIPS P8700 APLIC
dt-bindings: interrupt-controller: Add MIPS P8700 ACLINT MSWI
dt-bindings: timer: Add MIPS P8700 ACLINT MTIMER
riscv: dts: mips: Initial support for the P8700 Boston board
MAINTAINERS: Add entry for MIPS RISC-V SoC support
riscv: defconfig: Enable MIPS SoCs
.../bindings/interrupt-controller/riscv,aplic.yaml | 1 +
.../thead,c900-aclint-mswi.yaml | 11 ++
Documentation/devicetree/bindings/riscv/cpus.yaml | 1 +
Documentation/devicetree/bindings/riscv/mips.yaml | 33 +++++
.../bindings/timer/thead,c900-aclint-mtimer.yaml | 37 ++++++
MAINTAINERS | 7 ++
arch/riscv/Kconfig.socs | 6 +
arch/riscv/boot/dts/Makefile | 1 +
arch/riscv/boot/dts/mips/Makefile | 2 +
arch/riscv/boot/dts/mips/p8700-boston.dts | 135 +++++++++++++++++++++
arch/riscv/boot/dts/mips/p8700.dtsi | 82 +++++++++++++
arch/riscv/configs/defconfig | 1 +
12 files changed, 317 insertions(+)
---
base-commit: fd73f4a6659897191fa0d40695fe370925dd3780
change-id: 20260325-p8700-dts-41788f014227
Best regards,
--
Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v3 1/8] dt-bindings: riscv: cpus: add mips,p8700
2026-11-16 11:55 [PATCH v3 0/8] Add support for MIPS P8700 Aleksa Paunovic via B4 Relay
@ 2026-11-16 11:55 ` Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 2/8] dt-bindings: riscv: Add MIPS Boston board compatible Aleksa Paunovic via B4 Relay
` (6 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Aleksa Paunovic via B4 Relay @ 2026-11-16 11:55 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Djordje Todorovic,
Anup Patel, Thomas Gleixner, Radu Rendec, Inochi Amaoto,
Daniel Lezcano
Cc: devicetree, linux-kernel, Paul Walmsley, Palmer Dabbelt,
Conor Dooley, linux-riscv, Vladimir Kondratiev, Paul Walmsley,
Palmer Dabbelt, Joel Stanley, Aleksa Paunovic, Conor Dooley
From: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Document the MIPS P8700 compatible.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
---
Documentation/devicetree/bindings/riscv/cpus.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
index 0da219ae6769767a9b7f41f179a3559ae7160d69..3e7016687fb67c53856310f97f4ba587ba6b89e0 100644
--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -48,6 +48,7 @@ properties:
- amd,mbv64
- andestech,ax45mp
- canaan,k210
+ - mips,p8700
- nuclei,ux900
- sifive,bullet0
- sifive,e5
--
2.43.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 2/8] dt-bindings: riscv: Add MIPS Boston board compatible
2026-11-16 11:55 [PATCH v3 0/8] Add support for MIPS P8700 Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 1/8] dt-bindings: riscv: cpus: add mips,p8700 Aleksa Paunovic via B4 Relay
@ 2026-11-16 11:55 ` Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 3/8] dt-bindings: interrupt-controller: Add MIPS P8700 APLIC Aleksa Paunovic via B4 Relay
` (5 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Aleksa Paunovic via B4 Relay @ 2026-11-16 11:55 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Djordje Todorovic,
Anup Patel, Thomas Gleixner, Radu Rendec, Inochi Amaoto,
Daniel Lezcano
Cc: devicetree, linux-kernel, Paul Walmsley, Palmer Dabbelt,
Conor Dooley, linux-riscv, Vladimir Kondratiev, Paul Walmsley,
Palmer Dabbelt, Joel Stanley, Aleksa Paunovic, Conor Dooley
From: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Document the MIPS Boston board compatible with a P8700 bitfile.
Co-developed-by: Djordje Todorovic <djordje.todorovic@htecgroup.com>
Signed-off-by: Djordje Todorovic <djordje.todorovic@htecgroup.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
---
Documentation/devicetree/bindings/riscv/mips.yaml | 33 +++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/Documentation/devicetree/bindings/riscv/mips.yaml b/Documentation/devicetree/bindings/riscv/mips.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..bb251a7b1bcc762876fb94f0b636415774024183
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/mips.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/mips.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS SoC-based boards
+
+maintainers:
+ - Djordje Todorovic <djordje.todorovic@htecgroup.com>
+ - Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
+
+description:
+ MIPS SoC-based boards
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: |
+ Boston FPGA development board with a MIPS P8700 bitfile
+
+ The Boston board carries a Xilinx XC7V2000T FPGA and fixed
+ peripherals: a Xilinx AXI PCIe root port, an Intel EG20T PCH,
+ a UART and an ASCII LCD.
+ items:
+ - const: mips,p8700-boston-rtl-5057225-202410011144
+ - const: mips,p8700-boston
+
+additionalProperties: true
+
+...
--
2.43.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 3/8] dt-bindings: interrupt-controller: Add MIPS P8700 APLIC
2026-11-16 11:55 [PATCH v3 0/8] Add support for MIPS P8700 Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 1/8] dt-bindings: riscv: cpus: add mips,p8700 Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 2/8] dt-bindings: riscv: Add MIPS Boston board compatible Aleksa Paunovic via B4 Relay
@ 2026-11-16 11:55 ` Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 4/8] dt-bindings: interrupt-controller: Add MIPS P8700 ACLINT MSWI Aleksa Paunovic via B4 Relay
` (4 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Aleksa Paunovic via B4 Relay @ 2026-11-16 11:55 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Djordje Todorovic,
Anup Patel, Thomas Gleixner, Radu Rendec, Inochi Amaoto,
Daniel Lezcano
Cc: devicetree, linux-kernel, Paul Walmsley, Palmer Dabbelt,
Conor Dooley, linux-riscv, Vladimir Kondratiev, Paul Walmsley,
Palmer Dabbelt, Joel Stanley, Aleksa Paunovic, Conor Dooley
From: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Document the aplic compatible for the MIPS P8700.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
---
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
index 0718071444d29fbfa36283fc9666e8cecd6f77e7..2ab60031ac5d2379a361dfa2bb334796472cf039 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
@@ -27,6 +27,7 @@ properties:
compatible:
items:
- enum:
+ - mips,p8700-aplic
- qemu,aplic
- spacemit,k3-aplic
- const: riscv,aplic
--
2.43.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 4/8] dt-bindings: interrupt-controller: Add MIPS P8700 ACLINT MSWI
2026-11-16 11:55 [PATCH v3 0/8] Add support for MIPS P8700 Aleksa Paunovic via B4 Relay
` (2 preceding siblings ...)
2026-11-16 11:55 ` [PATCH v3 3/8] dt-bindings: interrupt-controller: Add MIPS P8700 APLIC Aleksa Paunovic via B4 Relay
@ 2026-11-16 11:55 ` Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 5/8] dt-bindings: timer: Add MIPS P8700 ACLINT MTIMER Aleksa Paunovic via B4 Relay
` (3 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Aleksa Paunovic via B4 Relay @ 2026-11-16 11:55 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Djordje Todorovic,
Anup Patel, Thomas Gleixner, Radu Rendec, Inochi Amaoto,
Daniel Lezcano
Cc: devicetree, linux-kernel, Paul Walmsley, Palmer Dabbelt,
Conor Dooley, linux-riscv, Vladimir Kondratiev, Paul Walmsley,
Palmer Dabbelt, Joel Stanley, Aleksa Paunovic, Conor Dooley
From: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Document the aclint mswi compatible for the MIPS P8700.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
---
.../bindings/interrupt-controller/thead,c900-aclint-mswi.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml
index 62fd220e126e650e3800d8eee2a749fdbbde6108..3255ea666e1560ccca239264786fa49d444e8101 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml
@@ -21,6 +21,7 @@ properties:
- enum:
- anlogic,dr1v90-aclint-mswi
- const: nuclei,ux900-aclint-mswi
+ - const: mips,p8700-aclint-mswi
reg:
maxItems: 1
@@ -46,4 +47,14 @@ examples:
<&cpu4intc 3>;
reg = <0x94000000 0x00010000>;
};
+
+ - |
+ mswi@16150000 {
+ compatible = "mips,p8700-aclint-mswi";
+ reg = <0x16150000 0x4000>;
+ interrupts-extended = <&cpu1intc 3>,
+ <&cpu2intc 3>,
+ <&cpu3intc 3>,
+ <&cpu4intc 3>;
+ };
...
--
2.43.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 5/8] dt-bindings: timer: Add MIPS P8700 ACLINT MTIMER
2026-11-16 11:55 [PATCH v3 0/8] Add support for MIPS P8700 Aleksa Paunovic via B4 Relay
` (3 preceding siblings ...)
2026-11-16 11:55 ` [PATCH v3 4/8] dt-bindings: interrupt-controller: Add MIPS P8700 ACLINT MSWI Aleksa Paunovic via B4 Relay
@ 2026-11-16 11:55 ` Aleksa Paunovic via B4 Relay
2026-11-16 12:13 ` sashiko-bot
2026-11-16 17:30 ` Conor Dooley
2026-11-16 11:55 ` [PATCH v3 6/8] riscv: dts: mips: Initial support for the P8700 Boston board Aleksa Paunovic via B4 Relay
` (2 subsequent siblings)
7 siblings, 2 replies; 12+ messages in thread
From: Aleksa Paunovic via B4 Relay @ 2026-11-16 11:55 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Djordje Todorovic,
Anup Patel, Thomas Gleixner, Radu Rendec, Inochi Amaoto,
Daniel Lezcano
Cc: devicetree, linux-kernel, Paul Walmsley, Palmer Dabbelt,
Conor Dooley, linux-riscv, Vladimir Kondratiev, Paul Walmsley,
Palmer Dabbelt, Joel Stanley, Aleksa Paunovic
From: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Document the MIPS P8700 ACLINT MTIMER.
Extend support for both mtimecmp and mtime registers
within the ACLINT MTIMER, identified via reg-names.
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
---
.../bindings/timer/thead,c900-aclint-mtimer.yaml | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml b/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
index cf7c82e980f674afcf59fc726742dc4f49c1a820..a5ebe04ade9ed61c8beac5017aab94ab12afa9ea 100644
--- a/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
+++ b/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
@@ -21,13 +21,19 @@ properties:
- enum:
- anlogic,dr1v90-aclint-mtimer
- const: nuclei,ux900-aclint-mtimer
+ - const: mips,p8700-aclint-mtimer
reg:
+ minItems: 1
items:
+ - description: MTIME Registers, or MTIMECMP Registers if only one
+ region is present
- description: MTIMECMP Registers
reg-names:
+ minItems: 1
items:
+ - enum: [ mtime, mtimecmp ]
- const: mtimecmp
interrupts-extended:
@@ -42,6 +48,26 @@ required:
- reg-names
- interrupts-extended
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mips,p8700-aclint-mtimer
+ then:
+ properties:
+ reg:
+ minItems: 2
+ reg-names:
+ minItems: 2
+ else:
+ properties:
+ reg:
+ maxItems: 1
+ reg-names:
+ items:
+ - const: mtimecmp
+
examples:
- |
timer@ac000000 {
@@ -53,4 +79,15 @@ examples:
reg = <0xac000000 0x00010000>;
reg-names = "mtimecmp";
};
+
+ - |
+ timer@16108050 {
+ compatible = "mips,p8700-aclint-mtimer";
+ reg = <0x16108050 0x8>, <0x16154000 0x7ff8>;
+ reg-names = "mtime", "mtimecmp";
+ interrupts-extended = <&cpu1intc 7>,
+ <&cpu2intc 7>,
+ <&cpu3intc 7>,
+ <&cpu4intc 7>;
+ };
...
--
2.43.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 6/8] riscv: dts: mips: Initial support for the P8700 Boston board
2026-11-16 11:55 [PATCH v3 0/8] Add support for MIPS P8700 Aleksa Paunovic via B4 Relay
` (4 preceding siblings ...)
2026-11-16 11:55 ` [PATCH v3 5/8] dt-bindings: timer: Add MIPS P8700 ACLINT MTIMER Aleksa Paunovic via B4 Relay
@ 2026-11-16 11:55 ` Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 7/8] MAINTAINERS: Add entry for MIPS RISC-V SoC support Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 8/8] riscv: defconfig: Enable MIPS SoCs Aleksa Paunovic via B4 Relay
7 siblings, 0 replies; 12+ messages in thread
From: Aleksa Paunovic via B4 Relay @ 2026-11-16 11:55 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Djordje Todorovic,
Anup Patel, Thomas Gleixner, Radu Rendec, Inochi Amaoto,
Daniel Lezcano
Cc: devicetree, linux-kernel, Paul Walmsley, Palmer Dabbelt,
Conor Dooley, linux-riscv, Vladimir Kondratiev, Paul Walmsley,
Palmer Dabbelt, Joel Stanley, Aleksa Paunovic
From: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Add initial device tree for the MIPS P8700 and the device tree
for the Boston FPGA development board with a MIPS P8700 bitfile.
Add related Makefile and KCONFIG changes.
Co-developed-by: Djordje Todorovic <djordje.todorovic@htecgroup.com>
Signed-off-by: Djordje Todorovic <djordje.todorovic@htecgroup.com>
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
---
arch/riscv/Kconfig.socs | 6 ++
arch/riscv/boot/dts/Makefile | 1 +
arch/riscv/boot/dts/mips/Makefile | 2 +
arch/riscv/boot/dts/mips/p8700-boston.dts | 135 ++++++++++++++++++++++++++++++
arch/riscv/boot/dts/mips/p8700.dtsi | 82 ++++++++++++++++++
5 files changed, 226 insertions(+)
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 429e0758930687c742c4dd09603e71e90dc096a2..2562b74f85969b52a7e22679322951f5fd8884a9 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -26,6 +26,12 @@ config ARCH_MICROCHIP
help
This enables support for Microchip SoC platforms.
+config ARCH_MIPS
+ bool "MIPS SoCs"
+ help
+ This enables support for MIPS SoC platform hardware,
+ including the P8700.
+
config ARCH_RENESAS
bool "Renesas RISC-V SoCs"
help
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index 69d8751fb17c803f0efb8003e111ee24144c222b..6669ddd10f1ec3a2b0323cd0b460d48ae56edd2e 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -5,6 +5,7 @@ subdir-y += anlogic
subdir-y += canaan
subdir-y += eswin
subdir-y += microchip
+subdir-y += mips
subdir-y += renesas
subdir-y += sifive
subdir-y += sophgo
diff --git a/arch/riscv/boot/dts/mips/Makefile b/arch/riscv/boot/dts/mips/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..a1f3a8ed427342042a3ec176d3cb41c8dbb8926a
--- /dev/null
+++ b/arch/riscv/boot/dts/mips/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MIPS) += p8700-boston.dtb
diff --git a/arch/riscv/boot/dts/mips/p8700-boston.dts b/arch/riscv/boot/dts/mips/p8700-boston.dts
new file mode 100644
index 0000000000000000000000000000000000000000..4383ef7cec152a6d43aaf24fea9fdf266ee288d8
--- /dev/null
+++ b/arch/riscv/boot/dts/mips/p8700-boston.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2025 MIPS
+ *
+ * Boston FPGA development board with a MIPS P8700 bitfile.
+ */
+
+/dts-v1/;
+
+#include "p8700.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/* Clock frequency (in Hz) of the FPGA bitfile */
+#define BITFILE_FREQ 25000000
+
+/ {
+ model = "MIPS P8700 Boston";
+ compatible = "mips,p8700-boston-rtl-5057225-202410011144",
+ "mips,p8700-boston";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ timebase-frequency = <BITFILE_FREQ>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ pci2: pci@14000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x14000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&aplic_s0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x16000000
+ 0x16000000 0 0x100000>;
+
+ bus-range = <0x00 0xff>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci2_intc 1>,
+ <0 0 0 2 &pci2_intc 2>,
+ <0 0 0 3 &pci2_intc 3>,
+ <0 0 0 4 &pci2_intc 4>;
+
+ pci2_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ pci2_root@0,0 {
+ compatible = "pci10ee,7021";
+ reg = <0x00000000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ eg20t_bridge@1,0,0 {
+ compatible = "pci8086,8800";
+ reg = <0x00010000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ eg20t_mac@2,0,1 {
+ compatible = "pci8086,8802";
+ reg = <0x00020100 0 0 0 0>;
+ phy-reset-gpios = <&eg20t_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ eg20t_gpio: eg20t_gpio@2,0,2 {
+ compatible = "pci8086,8803";
+ reg = <0x00020200 0 0 0 0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eg20t_i2c@2,12,2 {
+ compatible = "pci8086,8817";
+ reg = <0x00026200 0 0 0 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ compatible = "st,m41t81s";
+ reg = <0x68>;
+ };
+ };
+ };
+ };
+ };
+
+ uart0: serial@17ffe000 {
+ compatible = "ns16550a";
+ reg = <0x17ffe000 0x1000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+
+ interrupt-parent = <&aplic_s0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+ clock-frequency = <BITFILE_FREQ>;
+ };
+
+ lcd: lcd@17fff000 {
+ compatible = "img,boston-lcd";
+ reg = <0x17fff000 0x8>;
+ };
+
+ flash@18000000 {
+ compatible = "cfi-flash";
+ reg = <0x18000000 0x8000000>;
+ bank-width = <2>;
+ };
+};
diff --git a/arch/riscv/boot/dts/mips/p8700.dtsi b/arch/riscv/boot/dts/mips/p8700.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..94536e7e6e87998486f919a2962ee1da4d2c596b
--- /dev/null
+++ b/arch/riscv/boot/dts/mips/p8700.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2025 MIPS
+ */
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,p8700", "riscv";
+ reg = <0x0>;
+ mmu-type = "riscv,sv39";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+ "zicntr", "zicsr", "zifencei",
+ "zihpm", "zba", "zbb",
+ "xmipsexectl";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mtimer0: timer@16108050 {
+ compatible = "mips,p8700-aclint-mtimer";
+ reg = <0x16108050 0x8>,
+ <0x16154000 0x7ff8>;
+ reg-names = "mtime", "mtimecmp";
+ interrupts-extended = <&cpu0_intc 7>;
+ };
+
+ aplic_m0: interrupt-controller@16140000 {
+ compatible = "mips,p8700-aplic", "riscv,aplic";
+ reg = <0x16140000 0x8000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts-extended = <&cpu0_intc 11>;
+ riscv,num-sources = <53>;
+ riscv,children = <&aplic_s0>;
+ riscv,delegation = <&aplic_s0 1 53>;
+ };
+
+ mswi0: mswi@16150000 {
+ compatible = "mips,p8700-aclint-mswi";
+ reg = <0x16150000 0x4000>;
+ interrupts-extended = <&cpu0_intc 3>;
+ };
+
+ aplic_s0: interrupt-controller@16160000 {
+ compatible = "mips,p8700-aplic", "riscv,aplic";
+ reg = <0x16160000 0x8000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts-extended = <&cpu0_intc 9>;
+ riscv,num-sources = <53>;
+ };
+
+ sswi0: interrupt-controller@1616c000 {
+ compatible = "mips,p8700-aclint-sswi";
+ reg = <0x1616c000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <0>;
+ interrupts-extended = <&cpu0_intc 1>;
+ riscv,hart-indexes = <0x0>;
+ };
+ };
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 7/8] MAINTAINERS: Add entry for MIPS RISC-V SoC support
2026-11-16 11:55 [PATCH v3 0/8] Add support for MIPS P8700 Aleksa Paunovic via B4 Relay
` (5 preceding siblings ...)
2026-11-16 11:55 ` [PATCH v3 6/8] riscv: dts: mips: Initial support for the P8700 Boston board Aleksa Paunovic via B4 Relay
@ 2026-11-16 11:55 ` Aleksa Paunovic via B4 Relay
2026-11-16 17:40 ` Conor Dooley
2026-11-16 11:55 ` [PATCH v3 8/8] riscv: defconfig: Enable MIPS SoCs Aleksa Paunovic via B4 Relay
7 siblings, 1 reply; 12+ messages in thread
From: Aleksa Paunovic via B4 Relay @ 2026-11-16 11:55 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Djordje Todorovic,
Anup Patel, Thomas Gleixner, Radu Rendec, Inochi Amaoto,
Daniel Lezcano
Cc: devicetree, linux-kernel, Paul Walmsley, Palmer Dabbelt,
Conor Dooley, linux-riscv, Vladimir Kondratiev, Paul Walmsley,
Palmer Dabbelt, Joel Stanley, Aleksa Paunovic
From: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Add a MAINTAINERS entry covering the MIPS RISC-V devicetree sources
and the board binding.
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index c2414447892c24d58595059ca27b18775919ac12..a00f1a801be3c532c33918e673c7977d9de91823 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -23542,6 +23542,13 @@ F: drivers/spi/spi-mpfs.c
F: drivers/usb/musb/mpfs.c
F: include/soc/microchip/mpfs.h
+RISC-V MIPS SoC SUPPORT
+M: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
+L: linux-riscv@lists.infradead.org
+S: Supported
+F: Documentation/devicetree/bindings/riscv/mips.yaml
+F: arch/riscv/boot/dts/mips/
+
RISC-V MISC SOC SUPPORT
M: Conor Dooley <conor@kernel.org>
L: linux-riscv@lists.infradead.org
--
2.43.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 8/8] riscv: defconfig: Enable MIPS SoCs
2026-11-16 11:55 [PATCH v3 0/8] Add support for MIPS P8700 Aleksa Paunovic via B4 Relay
` (6 preceding siblings ...)
2026-11-16 11:55 ` [PATCH v3 7/8] MAINTAINERS: Add entry for MIPS RISC-V SoC support Aleksa Paunovic via B4 Relay
@ 2026-11-16 11:55 ` Aleksa Paunovic via B4 Relay
7 siblings, 0 replies; 12+ messages in thread
From: Aleksa Paunovic via B4 Relay @ 2026-11-16 11:55 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Djordje Todorovic,
Anup Patel, Thomas Gleixner, Radu Rendec, Inochi Amaoto,
Daniel Lezcano
Cc: devicetree, linux-kernel, Paul Walmsley, Palmer Dabbelt,
Conor Dooley, linux-riscv, Vladimir Kondratiev, Paul Walmsley,
Palmer Dabbelt, Joel Stanley, Aleksa Paunovic, Conor Dooley
From: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Build the MIPS P8700 Boston dtb by default.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
---
arch/riscv/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 04ae305d5511bb0760247f50d4b69b1e3a00527b..1b0b5346603934058d8348ddb3aa9d7616af999c 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -26,6 +26,7 @@ CONFIG_ARCH_ANDES=y
CONFIG_ARCH_ANLOGIC=y
CONFIG_ARCH_ESWIN=y
CONFIG_ARCH_MICROCHIP=y
+CONFIG_ARCH_MIPS=y
CONFIG_ARCH_SIFIVE=y
CONFIG_ARCH_SOPHGO=y
CONFIG_ARCH_SPACEMIT=y
--
2.43.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v3 5/8] dt-bindings: timer: Add MIPS P8700 ACLINT MTIMER
2026-11-16 11:55 ` [PATCH v3 5/8] dt-bindings: timer: Add MIPS P8700 ACLINT MTIMER Aleksa Paunovic via B4 Relay
@ 2026-11-16 12:13 ` sashiko-bot
2026-11-16 17:30 ` Conor Dooley
1 sibling, 0 replies; 12+ messages in thread
From: sashiko-bot @ 2026-11-16 12:13 UTC (permalink / raw)
To: Aleksa Paunovic; +Cc: devicetree, robh, conor+dt
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Low] dt-bindings: timer: unwieldy conditionals and broken reg-names
in c900 mtimer
--
commit c813dc9b1038dccb749c89c6352de2cfcd1ce9b4
Author: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
dt-bindings: timer: Add MIPS P8700 ACLINT MTIMER
This commit adds the mips,p8700-aclint-mtimer compatible and support for
both mtime and mtimecmp register regions to thead,c900-aclint-mtimer.yaml.
> diff --git a/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml b/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
> index cf7c82e980f67..a5ebe04ade9ed 100644
> --- a/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
> +++ b/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
> @@ -21,13 +21,19 @@ properties:
> - enum:
> - anlogic,dr1v90-aclint-mtimer
> - const: nuclei,ux900-aclint-mtimer
> + - const: mips,p8700-aclint-mtimer
>
> reg:
> + minItems: 1
> items:
> + - description: MTIME Registers, or MTIMECMP Registers if only one
> + region is present
> - description: MTIMECMP Registers
>
> reg-names:
> + minItems: 1
> items:
> + - enum: [ mtime, mtimecmp ]
> - const: mtimecmp
>
> interrupts-extended:
> @@ -42,6 +48,26 @@ required:
> - reg-names
> - interrupts-extended
>
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: mips,p8700-aclint-mtimer
> + then:
> + properties:
> + reg:
> + minItems: 2
> + reg-names:
> + minItems: 2
> + else:
> + properties:
> + reg:
> + maxItems: 1
> + reg-names:
> + items:
> + - const: mtimecmp
[Severity: Low]
Should mips,p8700-aclint-mtimer be split into its own binding schema rather
than overloading reg and reg-names in thead,c900-aclint-mtimer.yaml?
The existing compatibles in this binding only have a single mtimecmp region
and no memory-mapped mtime region, as noted in commit b91cf01cf3e6
("dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp
regs"). Combining the two-region MIPS layout with the single-region layout
forces item 0 of reg and reg-names to mean either mtime or mtimecmp and
requires an allOf if/then/else block to redefine both properties per
compatible.
In addition, the conditional reg-names constraints here are incomplete: the
then branch only sets minItems: 2 without constraining the first item to
const: mtime, which lets an invalid reg-names = "mtimecmp", "mtimecmp" pass
validation via the top-level enum, while the else branch overrides the
2-item list with a 1-item list without setting maxItems: 1.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261116-p8700-dts-v3-0-ec5d4b7de39f@htecgroup.com?part=5
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v3 5/8] dt-bindings: timer: Add MIPS P8700 ACLINT MTIMER
2026-11-16 11:55 ` [PATCH v3 5/8] dt-bindings: timer: Add MIPS P8700 ACLINT MTIMER Aleksa Paunovic via B4 Relay
2026-11-16 12:13 ` sashiko-bot
@ 2026-11-16 17:30 ` Conor Dooley
1 sibling, 0 replies; 12+ messages in thread
From: Conor Dooley @ 2026-11-16 17:30 UTC (permalink / raw)
To: aleksa.paunovic
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Djordje Todorovic,
Anup Patel, Thomas Gleixner, Radu Rendec, Inochi Amaoto,
Daniel Lezcano, devicetree, linux-kernel, linux-riscv,
Vladimir Kondratiev, Paul Walmsley, Palmer Dabbelt, Joel Stanley
[-- Attachment #1: Type: text/plain, Size: 2950 bytes --]
On Mon, Nov 16, 2026 at 12:55:12PM +0100, Aleksa Paunovic via B4 Relay wrote:
> From: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
>
> Document the MIPS P8700 ACLINT MTIMER.
> Extend support for both mtimecmp and mtime registers
> within the ACLINT MTIMER, identified via reg-names.
>
> Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Perhaps worth mentioning that we are doing this this way because opensbi
expects this behaviour, as does u-boot, for the riscv,aclint-mtimer
compatible and we wish to align this device with it.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable
(If I end up applying this, I will amend the commit message)
Cheers,
Conor.
> ---
> .../bindings/timer/thead,c900-aclint-mtimer.yaml | 37 ++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml b/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
> index cf7c82e980f674afcf59fc726742dc4f49c1a820..a5ebe04ade9ed61c8beac5017aab94ab12afa9ea 100644
> --- a/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
> +++ b/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml
> @@ -21,13 +21,19 @@ properties:
> - enum:
> - anlogic,dr1v90-aclint-mtimer
> - const: nuclei,ux900-aclint-mtimer
> + - const: mips,p8700-aclint-mtimer
>
> reg:
> + minItems: 1
> items:
> + - description: MTIME Registers, or MTIMECMP Registers if only one
> + region is present
> - description: MTIMECMP Registers
>
> reg-names:
> + minItems: 1
> items:
> + - enum: [ mtime, mtimecmp ]
> - const: mtimecmp
>
> interrupts-extended:
> @@ -42,6 +48,26 @@ required:
> - reg-names
> - interrupts-extended
>
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: mips,p8700-aclint-mtimer
> + then:
> + properties:
> + reg:
> + minItems: 2
> + reg-names:
> + minItems: 2
> + else:
> + properties:
> + reg:
> + maxItems: 1
> + reg-names:
> + items:
> + - const: mtimecmp
> +
> examples:
> - |
> timer@ac000000 {
> @@ -53,4 +79,15 @@ examples:
> reg = <0xac000000 0x00010000>;
> reg-names = "mtimecmp";
> };
> +
> + - |
> + timer@16108050 {
> + compatible = "mips,p8700-aclint-mtimer";
> + reg = <0x16108050 0x8>, <0x16154000 0x7ff8>;
> + reg-names = "mtime", "mtimecmp";
> + interrupts-extended = <&cpu1intc 7>,
> + <&cpu2intc 7>,
> + <&cpu3intc 7>,
> + <&cpu4intc 7>;
> + };
> ...
>
> --
> 2.43.0
>
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v3 7/8] MAINTAINERS: Add entry for MIPS RISC-V SoC support
2026-11-16 11:55 ` [PATCH v3 7/8] MAINTAINERS: Add entry for MIPS RISC-V SoC support Aleksa Paunovic via B4 Relay
@ 2026-11-16 17:40 ` Conor Dooley
0 siblings, 0 replies; 12+ messages in thread
From: Conor Dooley @ 2026-11-16 17:40 UTC (permalink / raw)
To: aleksa.paunovic
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Djordje Todorovic,
Anup Patel, Thomas Gleixner, Radu Rendec, Inochi Amaoto,
Daniel Lezcano, devicetree, linux-kernel, linux-riscv,
Vladimir Kondratiev, Paul Walmsley, Palmer Dabbelt, Joel Stanley
[-- Attachment #1: Type: text/plain, Size: 2183 bytes --]
On Mon, Nov 16, 2026 at 12:55:14PM +0100, Aleksa Paunovic via B4 Relay wrote:
> From: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
>
> Add a MAINTAINERS entry covering the MIPS RISC-V devicetree sources
> and the board binding.
>
> Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
> ---
> MAINTAINERS | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index c2414447892c24d58595059ca27b18775919ac12..a00f1a801be3c532c33918e673c7977d9de91823 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -23542,6 +23542,13 @@ F: drivers/spi/spi-mpfs.c
> F: drivers/usb/musb/mpfs.c
> F: include/soc/microchip/mpfs.h
>
> +RISC-V MIPS SoC SUPPORT
> +M: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
> +L: linux-riscv@lists.infradead.org
> +S: Supported
> +F: Documentation/devicetree/bindings/riscv/mips.yaml
> +F: arch/riscv/boot/dts/mips/
Right, so still no git tree here. How are we going to get this applied?
My comment on the last version was:
| You're missing a MAINTAINERS entry for the platform, since someone is
| going to have to pick up the patches for the arch/riscv/boot/dts/gf and
| that someone is neither Palmer nor Paul.
| See Documentation/process/maintainer-soc.rst for more info.
|
| I'd apply patches as a very last resort, but even then you'd need an entry
| to make sure that you're CCed on patches for the platform because I
| don't care about the platform and would just apply things that look
| correct if there was no reviews provided.
You have added the entry, which is great, but the absence of a git tree
implies you're not actually intending applying the patches? Ideally you,
someone that cares for this platform, would do that - and the lack of a
tree implies that you're expecting someone else (me?) to do it.
Cheers,
Conor.
> +
> RISC-V MISC SOC SUPPORT
> M: Conor Dooley <conor@kernel.org>
> L: linux-riscv@lists.infradead.org
>
> --
> 2.43.0
>
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2026-11-16 17:41 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-16 11:55 [PATCH v3 0/8] Add support for MIPS P8700 Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 1/8] dt-bindings: riscv: cpus: add mips,p8700 Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 2/8] dt-bindings: riscv: Add MIPS Boston board compatible Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 3/8] dt-bindings: interrupt-controller: Add MIPS P8700 APLIC Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 4/8] dt-bindings: interrupt-controller: Add MIPS P8700 ACLINT MSWI Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 5/8] dt-bindings: timer: Add MIPS P8700 ACLINT MTIMER Aleksa Paunovic via B4 Relay
2026-11-16 12:13 ` sashiko-bot
2026-11-16 17:30 ` Conor Dooley
2026-11-16 11:55 ` [PATCH v3 6/8] riscv: dts: mips: Initial support for the P8700 Boston board Aleksa Paunovic via B4 Relay
2026-11-16 11:55 ` [PATCH v3 7/8] MAINTAINERS: Add entry for MIPS RISC-V SoC support Aleksa Paunovic via B4 Relay
2026-11-16 17:40 ` Conor Dooley
2026-11-16 11:55 ` [PATCH v3 8/8] riscv: defconfig: Enable MIPS SoCs Aleksa Paunovic via B4 Relay
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox