Devicetree
 help / color / mirror / Atom feed
* [PATCH v2 0/3] Add read-only SpacemiT K3 eFuse support
@ 2026-11-16  7:54 Jiayu Du
  2026-11-16  7:54 ` [PATCH v2 1/3] dt-bindings: nvmem: Add SpacemiT K3 eFuse controller Jiayu Du
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Jiayu Du @ 2026-11-16  7:54 UTC (permalink / raw)
  To: srini
  Cc: robh, krzk+dt, conor+dt, dlan, troy.mitchell, me, aurelien, pjw,
	palmer, aou, alex, p.zabel, devicetree, linux-riscv, spacemit,
	linux-kernel, Jiayu Du

This series adds read-only NVMEM access to bank 0 and bank 7 of the
SpacemiT K3 eFuse controller. These banks contain temperature calibration
parameters and other configuration data.

Tested on a SpacemiT K3 COM260 Kit: shadow reload completed successfully,
and reads of both banks matched v1. Repeated reads and reads crossing
bank/keepout boundaries returned the expected data.

Changes in v2:
- Trigger a shadow reload before polling FUSE_READY; fail probe on timeout.
- Enable the clock only while accessing hardware and leave the shared
  reset deasserted on teardown.
- Explain why the root key and SSK registers are excluded.
- Use an aligned __le32 cache instead of put_unaligned_le32().
- Drop unnecessary Kconfig dependencies and the bootloader initialization
  requirement.
- Use devm_platform_ioremap_resource() and align the register definitions.
- Enable the eFuse node by default in k3.dtsi.
- Add Conor's Acked-by to the binding patch.

v1: https://lore.kernel.org/all/20261106060525.346873-1-duge1256@gmail.com/

Jiayu Du (3):
  dt-bindings: nvmem: Add SpacemiT K3 eFuse controller
  nvmem: Add read-only SpacemiT K3 eFuse support
  riscv: dts: spacemit: Add K3 eFuse and temperature trim cells

 .../bindings/nvmem/spacemit,k3-efuse.yaml     |  63 ++++++
 MAINTAINERS                                   |   6 +
 arch/riscv/boot/dts/spacemit/k3.dtsi          |  23 ++
 drivers/nvmem/Kconfig                         |  11 +
 drivers/nvmem/Makefile                        |   1 +
 drivers/nvmem/spacemit-k3-efuse.c             | 199 ++++++++++++++++++
 6 files changed, 303 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/nvmem/spacemit,k3-efuse.yaml
 create mode 100644 drivers/nvmem/spacemit-k3-efuse.c


base-commit: d6bcfc94eb4da6e089c5473970cd96727292fd97
-- 
2.43.0


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2026-11-16  7:55 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-16  7:54 [PATCH v2 0/3] Add read-only SpacemiT K3 eFuse support Jiayu Du
2026-11-16  7:54 ` [PATCH v2 1/3] dt-bindings: nvmem: Add SpacemiT K3 eFuse controller Jiayu Du
2026-11-16  7:54 ` [PATCH v2 2/3] nvmem: Add read-only SpacemiT K3 eFuse support Jiayu Du
2026-11-16  7:54 ` [PATCH v2 3/3] riscv: dts: spacemit: Add K3 eFuse and temperature trim cells Jiayu Du

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox