* [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR
@ 2026-11-16 21:26 Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 01/16] dt-bindings: interrupt-controller: qcom,pdc: Document Halliday PDC Stanislav Aleksandrov
` (15 more replies)
0 siblings, 16 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov, Krzysztof Kozlowski, Konrad Dybcio
This series introduces initial Devicetree support for the Qualcomm Halliday
(SXR2250P / Snapdragon XR2+ Gen 2) and the Samsung Galaxy XR headset
(board compatible "samsung,xrvst2").
With this DT and the driver series, the headset boots to an initramfs
with a shell over USB NCM.
UFS, cpufreq and the thermal zones work too. PCIe with Wi-Fi and more
will follow.
Dependencies:
- The dts patches need v2 of the Halliday TLMM, clock, interconnect and
cpufreq series:
https://lore.kernel.org/r/20261116-halliday-tlmm-v2-0-b4dd502ca142@gmail.com
https://lore.kernel.org/r/20261116-halliday-clk-v2-0-28208928da36@gmail.com
https://lore.kernel.org/r/20261116-halliday-icc-v2-0-6df8fc0e0620@gmail.com
https://lore.kernel.org/r/20261116-halliday-cpufreq-v2-0-e518cc055457@gmail.com
This work was made together with Claude, ChatGPT and Gemini.
Reviewed and tested on my Galaxy XR.
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
Changes in v2:
- Order the patches by subsystem, with the SoC ones last (Krzysztof)
- Squash the "halliday" codename patch into the board binding
(Krzysztof)
- Add the SoC ID patches, which were a separate series in v1
(Krzysztof):
https://patch.msgid.link/20261108-sxr2250p-socinfo-v1-0-06244862f5c6@gmail.com
- Move the OSM L3 binding to the interconnect series (Krzysztof) and
the cpufreq-hw binding to the cpufreq series, so that each subsystem
gets its patches in one series
- dtsi: Keep the Linaro copyright of sm8550.dtsi, which the layout
comes from (Krzysztof)
- dtsi: Drop the empty chosen node (Krzysztof)
- dtsi: Sort the thermal trips by temperature (Krzysztof)
- dtsi: Put idle-states before domain-idle-states and
arm,psci-suspend-param before the latencies, like glymur.dtsi
(Konrad)
- dtsi: Use 0x0 for zeroes in reg, ranges, dma-ranges and
redistributor-stride (Konrad)
- dtsi: Break the reg-names, interrupt-names, clocks and clock-names
lists into one entry per line (Konrad)
- Cc Ulf Hansson for the rpmpd binding
- Link to v1: https://patch.msgid.link/20261109-halliday-dts-v1-0-289114ab8197@gmail.com
---
Stanislav Aleksandrov (16):
dt-bindings: interrupt-controller: qcom,pdc: Document Halliday PDC
dt-bindings: power: qcom,rpmpd: document the Halliday RPMh Power Domains
dt-bindings: mfd: qcom,tcsr: Add Halliday TCSR
dt-bindings: arm-smmu: Add Halliday SMMU
dt-bindings: usb: qcom,snps-dwc3: Add Halliday
dt-bindings: phy: qcom,usb-snps-femto-v2: Add Halliday HS PHY
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: Add Halliday
dt-bindings: ufs: qcom,sc7180-ufshc: Add Halliday UFS
dt-bindings: crypto: qcom,inline-crypto-engine: Add Halliday
dt-bindings: thermal: qcom-tsens: Document the Halliday Temperature Sensor
dt-bindings: firmware: qcom,scm: Document Halliday SCM
dt-bindings: arm: qcom: Add Samsung Galaxy XR
dt-bindings: arm: qcom,ids: Add SoC ID for SXR2250P
soc: qcom: socinfo: Add SXR2250P SoC ID
arm64: dts: qcom: Add initial Halliday dtsi
arm64: dts: qcom: Add Samsung Galaxy XR
.../devicetree/bindings/arm/qcom-soc.yaml | 4 +-
Documentation/devicetree/bindings/arm/qcom.yaml | 5 +
.../bindings/crypto/qcom,inline-crypto-engine.yaml | 1 +
.../devicetree/bindings/firmware/qcom,scm.yaml | 2 +
.../bindings/interrupt-controller/qcom,pdc.yaml | 1 +
.../devicetree/bindings/iommu/arm,smmu.yaml | 2 +
.../devicetree/bindings/mfd/qcom,tcsr.yaml | 1 +
.../bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml | 4 +
.../bindings/phy/qcom,usb-snps-femto-v2.yaml | 1 +
.../devicetree/bindings/power/qcom,rpmpd.yaml | 4 +
.../devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
.../devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml | 2 +
.../devicetree/bindings/usb/qcom,snps-dwc3.yaml | 3 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/halliday-samsung-xrvst2.dts | 218 +++
arch/arm64/boot/dts/qcom/halliday.dtsi | 1871 ++++++++++++++++++++
drivers/soc/qcom/socinfo.c | 1 +
include/dt-bindings/arm/qcom,ids.h | 1 +
18 files changed, 2121 insertions(+), 2 deletions(-)
---
base-commit: eac8f0411262ea7d156407da4baf260291cbfe32
change-id: 20261108-halliday-dts-e6ed3a2b5cd0
prerequisite-change-id: 20261108-halliday-tlmm-f250374110e0:v2
prerequisite-patch-id: 0f6c7c801393ba2d1ed5fc82a65be6b05f0f6cbe
prerequisite-patch-id: 36f2dcc3de10d5ccba9eee25b73736189559162a
prerequisite-change-id: 20261108-halliday-clk-362190f4f5dd:v2
prerequisite-patch-id: 765d40b7543dba6580852939a5c3d177f12d0a1e
prerequisite-patch-id: f12c958fceb125bcefd8dc9de139f30a371f85a4
prerequisite-patch-id: a6559b14fa1badec8e7752940362d68306523557
prerequisite-patch-id: ef47e531053032f65d3d600e2213c8a78e50f20b
prerequisite-patch-id: c4b2cbea76a00aeb699d706e09a899aa18e510d9
prerequisite-change-id: 20261108-halliday-icc-65a5442be859:v2
prerequisite-patch-id: 94cd5dee75e96876c6a42852cf6d1b52df1c7ace
prerequisite-patch-id: 9ad58176d603ffd84e7f1239c3b646cede4c8a3f
prerequisite-patch-id: a5df517be2541ab439d324dfe23ceb4c71a0e655
prerequisite-change-id: 20261108-halliday-cpufreq-1e9c3581e2b4:v2
prerequisite-patch-id: 95b1ae328d8049ecbe450b0f18df15465619f2af
prerequisite-patch-id: f67013633e74af33f78e3ee4d9de38bb2842fe87
Best regards,
--
Stanislav Aleksandrov <lightofmysoul@gmail.com>
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v2 01/16] dt-bindings: interrupt-controller: qcom,pdc: Document Halliday PDC
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 02/16] dt-bindings: power: qcom,rpmpd: document the Halliday RPMh Power Domains Stanislav Aleksandrov
` (14 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov, Krzysztof Kozlowski
Document the Power Domain Controller on the Qualcomm Halliday SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
index 8401d3b48e0f..cf20041e86c8 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
@@ -28,6 +28,7 @@ properties:
- enum:
- qcom,eliza-pdc
- qcom,glymur-pdc
+ - qcom,halliday-pdc
- qcom,hawi-pdc
- qcom,kaanapali-pdc
- qcom,kuno-pdc
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 02/16] dt-bindings: power: qcom,rpmpd: document the Halliday RPMh Power Domains
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 01/16] dt-bindings: interrupt-controller: qcom,pdc: Document Halliday PDC Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 03/16] dt-bindings: mfd: qcom,tcsr: Add Halliday TCSR Stanislav Aleksandrov
` (13 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov, Krzysztof Kozlowski
Document the RPMh Power Domains on the Qualcomm Halliday SoC
(SXR2250P). Its command DB has the same power domains as SM8450
(CX, EBI, GFX, LCX, LMX, MMCX, MSS, MX and MXC), so use
qcom,sm8450-rpmhpd as the fallback compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
Documentation/devicetree/bindings/power/qcom,rpmpd.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index 8ee1c25a7c9d..663baae9cc64 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -82,6 +82,10 @@ properties:
- enum:
- qcom,maili-rpmhpd
- const: qcom,hawi-rpmhpd
+ - items:
+ - enum:
+ - qcom,halliday-rpmhpd
+ - const: qcom,sm8450-rpmhpd
'#power-domain-cells':
const: 1
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 03/16] dt-bindings: mfd: qcom,tcsr: Add Halliday TCSR
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 01/16] dt-bindings: interrupt-controller: qcom,pdc: Document Halliday PDC Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 02/16] dt-bindings: power: qcom,rpmpd: document the Halliday RPMh Power Domains Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 04/16] dt-bindings: arm-smmu: Add Halliday SMMU Stanislav Aleksandrov
` (12 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov
Document the TCSR block on the Qualcomm Halliday SoC.
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index a021e4dea486..e8a681b5e6ad 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -17,6 +17,7 @@ properties:
compatible:
items:
- enum:
+ - qcom,halliday-tcsr
- qcom,hawi-tcsr
- qcom,maili-tcsr
- qcom,msm8976-tcsr
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 04/16] dt-bindings: arm-smmu: Add Halliday SMMU
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
` (2 preceding siblings ...)
2026-11-16 21:26 ` [PATCH v2 03/16] dt-bindings: mfd: qcom,tcsr: Add Halliday TCSR Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 05/16] dt-bindings: usb: qcom,snps-dwc3: Add Halliday Stanislav Aleksandrov
` (11 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov, Krzysztof Kozlowski
Document the SMMU-500 on the Qualcomm Halliday SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
Documentation/devicetree/bindings/iommu/arm,smmu.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index 6748351c7812..925afa8cca8d 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -37,6 +37,7 @@ properties:
- enum:
- qcom,eliza-smmu-500
- qcom,glymur-smmu-500
+ - qcom,halliday-smmu-500
- qcom,hawi-smmu-500
- qcom,ipq9650-smmu-500
- qcom,kaanapali-smmu-500
@@ -629,6 +630,7 @@ allOf:
- enum:
- qcom,eliza-smmu-500
- qcom,glymur-smmu-500
+ - qcom,halliday-smmu-500
- qcom,hawi-smmu-500
- qcom,ipq9650-smmu-500
- qcom,kaanapali-smmu-500
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 05/16] dt-bindings: usb: qcom,snps-dwc3: Add Halliday
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
` (3 preceding siblings ...)
2026-11-16 21:26 ` [PATCH v2 04/16] dt-bindings: arm-smmu: Add Halliday SMMU Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 06/16] dt-bindings: phy: qcom,usb-snps-femto-v2: Add Halliday HS PHY Stanislav Aleksandrov
` (10 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov
Document the DWC3 USB controller on the Qualcomm Halliday SoC.
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
index b77c02c64d45..7a8b72d2929d 100644
--- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
@@ -27,6 +27,7 @@ properties:
- qcom,eliza-dwc3
- qcom,glymur-dwc3
- qcom,glymur-dwc3-mp
+ - qcom,halliday-dwc3
- qcom,hawi-dwc3
- qcom,ipq4019-dwc3
- qcom,ipq5018-dwc3
@@ -209,6 +210,7 @@ allOf:
compatible:
contains:
enum:
+ - qcom,halliday-dwc3
- qcom,hawi-dwc3
- qcom,ipq5210-dwc3
- qcom,ipq5424-dwc3
@@ -570,6 +572,7 @@ allOf:
contains:
enum:
- qcom,eliza-dwc3
+ - qcom,halliday-dwc3
- qcom,hawi-dwc3
- qcom,ipq4019-dwc3
- qcom,ipq8064-dwc3
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 06/16] dt-bindings: phy: qcom,usb-snps-femto-v2: Add Halliday HS PHY
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
` (4 preceding siblings ...)
2026-11-16 21:26 ` [PATCH v2 05/16] dt-bindings: usb: qcom,snps-dwc3: Add Halliday Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 07/16] dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: Add Halliday Stanislav Aleksandrov
` (9 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov
Document the Synopsys femto USB high-speed PHY on the Qualcomm Halliday
SoC.
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
index 661759b25064..8ff1db4a1d79 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -22,6 +22,7 @@ properties:
- const: qcom,usb-snps-hs-5nm-phy
- items:
- enum:
+ - qcom,halliday-usb-hs-phy
- qcom,qcs8300-usb-hs-phy
- qcom,qdu1000-usb-hs-phy
- qcom,sc7280-usb-hs-phy
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 07/16] dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: Add Halliday
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
` (5 preceding siblings ...)
2026-11-16 21:26 ` [PATCH v2 06/16] dt-bindings: phy: qcom,usb-snps-femto-v2: Add Halliday HS PHY Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 08/16] dt-bindings: ufs: qcom,sc7180-ufshc: Add Halliday UFS Stanislav Aleksandrov
` (8 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov
Document the QMP UFS PHY on the Qualcomm Halliday SoC, which is
compatible with the SM8450 one.
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index 10435a0b5230..a42bba9b550d 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -28,6 +28,10 @@ properties:
- enum:
- qcom,qcs615-qmp-ufs-phy
- const: qcom,sm6115-qmp-ufs-phy
+ - items:
+ - enum:
+ - qcom,halliday-qmp-ufs-phy
+ - const: qcom,sm8450-qmp-ufs-phy
- items:
- enum:
- qcom,x1e80100-qmp-ufs-phy
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 08/16] dt-bindings: ufs: qcom,sc7180-ufshc: Add Halliday UFS
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
` (6 preceding siblings ...)
2026-11-16 21:26 ` [PATCH v2 07/16] dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: Add Halliday Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 09/16] dt-bindings: crypto: qcom,inline-crypto-engine: Add Halliday Stanislav Aleksandrov
` (7 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov
Document the UFS host controller on the Qualcomm Halliday SoC.
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
Documentation/devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml b/Documentation/devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml
index 3c407426d697..5d1784baddd7 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml
@@ -15,6 +15,7 @@ select:
compatible:
contains:
enum:
+ - qcom,halliday-ufshc
- qcom,milos-ufshc
- qcom,msm8998-ufshc
- qcom,qcs8300-ufshc
@@ -40,6 +41,7 @@ properties:
- const: qcom,ufshc
- items:
- enum:
+ - qcom,halliday-ufshc
- qcom,milos-ufshc
- qcom,msm8998-ufshc
- qcom,qcs8300-ufshc
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 09/16] dt-bindings: crypto: qcom,inline-crypto-engine: Add Halliday
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
` (7 preceding siblings ...)
2026-11-16 21:26 ` [PATCH v2 08/16] dt-bindings: ufs: qcom,sc7180-ufshc: Add Halliday UFS Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 10/16] dt-bindings: thermal: qcom-tsens: Document the Halliday Temperature Sensor Stanislav Aleksandrov
` (6 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov
Document the Inline Crypto Engine on the Qualcomm Halliday SoC.
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
index 23bf98c2b9fa..1512fd1d7471 100644
--- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
+++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
@@ -14,6 +14,7 @@ properties:
items:
- enum:
- qcom,eliza-inline-crypto-engine
+ - qcom,halliday-inline-crypto-engine
- qcom,hawi-inline-crypto-engine
- qcom,kaanapali-inline-crypto-engine
- qcom,maili-inline-crypto-engine
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 10/16] dt-bindings: thermal: qcom-tsens: Document the Halliday Temperature Sensor
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
` (8 preceding siblings ...)
2026-11-16 21:26 ` [PATCH v2 09/16] dt-bindings: crypto: qcom,inline-crypto-engine: Add Halliday Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 11/16] dt-bindings: firmware: qcom,scm: Document Halliday SCM Stanislav Aleksandrov
` (5 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov
Document the Temperature Sensor (TSENS) on the Qualcomm Halliday SoC.
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index c78074fbcecf..3b440f395fe8 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -57,6 +57,7 @@ properties:
- enum:
- qcom,eliza-tsens
- qcom,glymur-tsens
+ - qcom,halliday-tsens
- qcom,hawi-tsens
- qcom,kaanapali-tsens
- qcom,maili-tsens
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 11/16] dt-bindings: firmware: qcom,scm: Document Halliday SCM
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
` (9 preceding siblings ...)
2026-11-16 21:26 ` [PATCH v2 10/16] dt-bindings: thermal: qcom-tsens: Document the Halliday Temperature Sensor Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 12/16] dt-bindings: arm: qcom: Add Samsung Galaxy XR Stanislav Aleksandrov
` (4 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov, Krzysztof Kozlowski
Document the SCM on the Qualcomm Halliday SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index 40a267c54b00..fb3da66443ed 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -25,6 +25,7 @@ properties:
- qcom,scm-apq8084
- qcom,scm-eliza
- qcom,scm-glymur
+ - qcom,scm-halliday
- qcom,scm-hawi
- qcom,scm-ipq4019
- qcom,scm-ipq5018
@@ -225,6 +226,7 @@ allOf:
contains:
enum:
- qcom,scm-eliza
+ - qcom,scm-halliday
- qcom,scm-hawi
- qcom,scm-kaanapali
- qcom,scm-maili
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 12/16] dt-bindings: arm: qcom: Add Samsung Galaxy XR
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
` (10 preceding siblings ...)
2026-11-16 21:26 ` [PATCH v2 11/16] dt-bindings: firmware: qcom,scm: Document Halliday SCM Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 13/16] dt-bindings: arm: qcom,ids: Add SoC ID for SXR2250P Stanislav Aleksandrov
` (3 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov, Krzysztof Kozlowski
Document the Samsung Galaxy XR headset, which is based on the Qualcomm
Halliday SoC (SXR2250P), and register the "halliday" codename in the
SoC naming convention schema.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
Documentation/devicetree/bindings/arm/qcom-soc.yaml | 4 ++--
Documentation/devicetree/bindings/arm/qcom.yaml | 5 +++++
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml
index 179aadc86a9f..9d392329d437 100644
--- a/Documentation/devicetree/bindings/arm/qcom-soc.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml
@@ -30,7 +30,7 @@ select:
contains:
oneOf:
- pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1[ep])[0-9]+.*$"
- - pattern: "^qcom,.*(eliza|kaanapali|kuno|glymur|hawi|mahua|maili|milos|nord|shikra).*$"
+ - pattern: "^qcom,.*(eliza|kaanapali|kuno|glymur|halliday|hawi|mahua|maili|milos|nord|shikra).*$"
required:
- compatible
@@ -42,7 +42,7 @@ properties:
- pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1[ep])[0-9]+(pro)?-.*$"
- pattern: "^qcom,sar[0-9]+[a-z]?-.*$"
- pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$"
- - pattern: "^qcom,(eliza|kaanapali|kuno|glymur|hawi|mahua|maili|milos|nord|shikra)-.+$"
+ - pattern: "^qcom,(eliza|kaanapali|kuno|glymur|halliday|hawi|mahua|maili|milos|nord|shikra)-.+$"
# Legacy namings - variations of existing patterns/compatibles are OK,
# but do not add completely new entries to these:
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 7ffa4f69987f..2a77382a9f25 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -106,6 +106,11 @@ properties:
- qcom,glymur-sip-crd
- const: qcom,glymur
+ - items:
+ - enum:
+ - samsung,xrvst2
+ - const: qcom,halliday
+
- items:
- enum:
- 8dev,jalapeno
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 13/16] dt-bindings: arm: qcom,ids: Add SoC ID for SXR2250P
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
` (11 preceding siblings ...)
2026-11-16 21:26 ` [PATCH v2 12/16] dt-bindings: arm: qcom: Add Samsung Galaxy XR Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 14/16] soc: qcom: socinfo: Add SXR2250P SoC ID Stanislav Aleksandrov
` (2 subsequent siblings)
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov, Konrad Dybcio
Add the ID for the Qualcomm SXR2250P (Snapdragon XR2+ Gen 2) SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
include/dt-bindings/arm/qcom,ids.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dt-bindings/arm/qcom,ids.h b/include/dt-bindings/arm/qcom,ids.h
index 135297027580..cbcab632e01c 100644
--- a/include/dt-bindings/arm/qcom,ids.h
+++ b/include/dt-bindings/arm/qcom,ids.h
@@ -288,6 +288,7 @@
#define QCOM_ID_SM7635 636
#define QCOM_ID_SM6650 640
#define QCOM_ID_SM6650P 641
+#define QCOM_ID_SXR2250P 649
#define QCOM_ID_IPQ5321 650
#define QCOM_ID_IPQ5424 651
#define QCOM_ID_QCM6690 657
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 14/16] soc: qcom: socinfo: Add SXR2250P SoC ID
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
` (12 preceding siblings ...)
2026-11-16 21:26 ` [PATCH v2 13/16] dt-bindings: arm: qcom,ids: Add SoC ID for SXR2250P Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 15/16] arm64: dts: qcom: Add initial Halliday dtsi Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 16/16] arm64: dts: qcom: Add Samsung Galaxy XR Stanislav Aleksandrov
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov
Add the SoC ID for the Qualcomm SXR2250P (Snapdragon XR2+ Gen 2).
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
drivers/soc/qcom/socinfo.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index 38efc5db7fa8..c5b61d28fc9d 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -529,6 +529,7 @@ static const struct soc_id soc_id[] = {
{ qcom_board_id(SM7635) },
{ qcom_board_id(SM6650) },
{ qcom_board_id(SM6650P) },
+ { qcom_board_id(SXR2250P) },
{ qcom_board_id(IPQ5321) },
{ qcom_board_id(IPQ5424) },
{ qcom_board_id(QCM6690) },
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 15/16] arm64: dts: qcom: Add initial Halliday dtsi
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
` (13 preceding siblings ...)
2026-11-16 21:26 ` [PATCH v2 14/16] soc: qcom: socinfo: Add SXR2250P SoC ID Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 16/16] arm64: dts: qcom: Add Samsung Galaxy XR Stanislav Aleksandrov
15 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov
Add the device tree for the Qualcomm Halliday SoC
(SXR2250P / Snapdragon XR2+ Gen 2).
It describes the CPUs with their idle states, cpufreq and OPP tables,
the GIC and the PDC, the timers, SCM, SMEM, RPMh with its clocks, power
domains and interconnects, TLMM, GCC, SPMI, the apps SMMU, USB, UFS
with ICE, TSENS with the thermal zones and the PMU.
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
arch/arm64/boot/dts/qcom/halliday.dtsi | 1871 ++++++++++++++++++++++++++++++++
1 file changed, 1871 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/halliday.dtsi b/arch/arm64/boot/dts/qcom/halliday.dtsi
new file mode 100644
index 000000000000..a3207c0c8d4b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/halliday.dtsi
@@ -0,0 +1,1871 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ * Copyright (c) 2026, Stanislav Aleksandrov <lightofmysoul@gmail.com>
+ */
+
+#include <dt-bindings/clock/qcom,halliday-gcc.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,halliday-rpmh.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks {
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78c";
+ reg = <0x0 0x0>;
+ clocks = <&cpufreq_hw 0>;
+ enable-method = "psci";
+ next-level-cache = <&l2_0>;
+ power-domains = <&cpu_pd0>;
+ power-domain-names = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3 MASTER_EPSS_L3_APPS
+ &epss_l3 SLAVE_EPSS_L3_SHARED>;
+ #cooling-cells = <2>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+
+ l2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_0>;
+
+ l3_0: l3-cache {
+ compatible = "cache";
+ cache-level = <3>;
+ cache-unified;
+ };
+ };
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78c";
+ reg = <0x0 0x100>;
+ clocks = <&cpufreq_hw 0>;
+ enable-method = "psci";
+ next-level-cache = <&l2_100>;
+ power-domains = <&cpu_pd1>;
+ power-domain-names = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3 MASTER_EPSS_L3_APPS
+ &epss_l3 SLAVE_EPSS_L3_SHARED>;
+ #cooling-cells = <2>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+
+ l2_100: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_0>;
+ };
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78c";
+ reg = <0x0 0x200>;
+ clocks = <&cpufreq_hw 1>;
+ enable-method = "psci";
+ next-level-cache = <&l2_200>;
+ power-domains = <&cpu_pd2>;
+ power-domain-names = "psci";
+ capacity-dmips-mhz = <1075>;
+ dynamic-power-coefficient = <85>;
+ operating-points-v2 = <&cpu2_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3 MASTER_EPSS_L3_APPS
+ &epss_l3 SLAVE_EPSS_L3_SHARED>;
+ #cooling-cells = <2>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+
+ l2_200: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_0>;
+ };
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78c";
+ reg = <0x0 0x300>;
+ clocks = <&cpufreq_hw 1>;
+ enable-method = "psci";
+ next-level-cache = <&l2_300>;
+ power-domains = <&cpu_pd3>;
+ power-domain-names = "psci";
+ capacity-dmips-mhz = <1075>;
+ dynamic-power-coefficient = <85>;
+ operating-points-v2 = <&cpu2_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3 MASTER_EPSS_L3_APPS
+ &epss_l3 SLAVE_EPSS_L3_SHARED>;
+ #cooling-cells = <2>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+
+ l2_300: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_0>;
+ };
+ };
+
+ cpu4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78c";
+ reg = <0x0 0x400>;
+ clocks = <&cpufreq_hw 1>;
+ enable-method = "psci";
+ next-level-cache = <&l2_400>;
+ power-domains = <&cpu_pd4>;
+ power-domain-names = "psci";
+ capacity-dmips-mhz = <1075>;
+ dynamic-power-coefficient = <85>;
+ operating-points-v2 = <&cpu2_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3 MASTER_EPSS_L3_APPS
+ &epss_l3 SLAVE_EPSS_L3_SHARED>;
+ #cooling-cells = <2>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+
+ l2_400: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_0>;
+ };
+ };
+
+ cpu5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78c";
+ reg = <0x0 0x500>;
+ clocks = <&cpufreq_hw 1>;
+ enable-method = "psci";
+ next-level-cache = <&l2_500>;
+ power-domains = <&cpu_pd5>;
+ power-domain-names = "psci";
+ capacity-dmips-mhz = <1075>;
+ dynamic-power-coefficient = <85>;
+ operating-points-v2 = <&cpu2_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3 MASTER_EPSS_L3_APPS
+ &epss_l3 SLAVE_EPSS_L3_SHARED>;
+ #cooling-cells = <2>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+
+ l2_500: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_0>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+
+ core4 {
+ cpu = <&cpu4>;
+ };
+
+ core5 {
+ cpu = <&cpu5>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ gold_cpu_sleep_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "gold-power-collapse";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <400>;
+ exit-latency-us = <1400>;
+ min-residency-us = <2207>;
+ local-timer-stop;
+ };
+
+ gold_cpu_sleep_1: cpu-sleep-0-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "gold-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <600>;
+ exit-latency-us = <1300>;
+ min-residency-us = <8136>;
+ local-timer-stop;
+ };
+
+ gold_plus_cpu_sleep_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "gold-plus-power-collapse";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <300>;
+ exit-latency-us = <1450>;
+ min-residency-us = <3230>;
+ local-timer-stop;
+ };
+
+ gold_plus_cpu_sleep_1: cpu-sleep-1-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "gold-plus-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <500>;
+ exit-latency-us = <1350>;
+ min-residency-us = <7480>;
+ local-timer-stop;
+ };
+ };
+
+ domain-idle-states {
+ cluster_sleep_0: cluster-sleep-0 {
+ compatible = "domain-idle-state";
+ arm,psci-suspend-param = <0x41000044>;
+ entry-latency-us = <1050>;
+ exit-latency-us = <2500>;
+ min-residency-us = <9309>;
+ };
+
+ cluster_sleep_1: cluster-sleep-1 {
+ compatible = "domain-idle-state";
+ arm,psci-suspend-param = <0x4100c344>;
+ entry-latency-us = <2700>;
+ exit-latency-us = <3500>;
+ min-residency-us = <13959>;
+ };
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-halliday", "qcom,scm";
+ qcom,dload-mode = <&tcsr 0x13000>;
+ interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ };
+ };
+
+ clk_virt: interconnect-0 {
+ compatible = "qcom,halliday-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect-1 {
+ compatible = "qcom,halliday-mc-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ memory@a0000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0xa0000000 0x0 0x0>;
+ };
+
+ cpu0_opp_table: opp-table-cpu0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-691200000 {
+ opp-hz = /bits/ 64 <691200000>;
+ opp-peak-kBps = <(300000 * 16) (547000 * 4) (422400 * 32)>;
+ };
+
+ opp-960000000 {
+ opp-hz = /bits/ 64 <960000000>;
+ opp-peak-kBps = <(466500 * 16) (547000 * 4) (691200 * 32)>;
+ };
+
+ opp-1094400000 {
+ opp-hz = /bits/ 64 <1094400000>;
+ opp-peak-kBps = <(466500 * 16) (547000 * 4) (825600 * 32)>;
+ };
+
+ opp-1228800000 {
+ opp-hz = /bits/ 64 <1228800000>;
+ opp-peak-kBps = <(600000 * 16) (768000 * 4) (1075200 * 32)>;
+ };
+
+ opp-1382400000 {
+ opp-hz = /bits/ 64 <1382400000>;
+ opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1209600 * 32)>;
+ };
+
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1401600 * 32)>;
+ };
+
+ opp-1651200000 {
+ opp-hz = /bits/ 64 <1651200000>;
+ opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1612800 * 32)>;
+ };
+
+ opp-1920000000 {
+ opp-hz = /bits/ 64 <1920000000>;
+ opp-peak-kBps = <(806000 * 16) (3196000 * 4) (1708800 * 32)>;
+ };
+
+ opp-2054400000 {
+ opp-hz = /bits/ 64 <2054400000>;
+ opp-peak-kBps = <(1066000 * 16) (3196000 * 4) (1708800 * 32)>;
+ };
+
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-peak-kBps = <(1066000 * 16) (3196000 * 4) (1708800 * 32)>;
+ };
+
+ opp-2361600000 {
+ opp-hz = /bits/ 64 <2361600000>;
+ opp-peak-kBps = <(1066000 * 16) (3196000 * 4) (1708800 * 32)>;
+ };
+ };
+
+ cpu2_opp_table: opp-table-cpu2 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-691200000 {
+ opp-hz = /bits/ 64 <691200000>;
+ opp-peak-kBps = <(300000 * 16) (547000 * 4) (422400 * 32)>;
+ };
+
+ opp-960000000 {
+ opp-hz = /bits/ 64 <960000000>;
+ opp-peak-kBps = <(466500 * 16) (547000 * 4) (691200 * 32)>;
+ };
+
+ opp-1094400000 {
+ opp-hz = /bits/ 64 <1094400000>;
+ opp-peak-kBps = <(466500 * 16) (547000 * 4) (825600 * 32)>;
+ };
+
+ opp-1228800000 {
+ opp-hz = /bits/ 64 <1228800000>;
+ opp-peak-kBps = <(600000 * 16) (768000 * 4) (1075200 * 32)>;
+ };
+
+ opp-1382400000 {
+ opp-hz = /bits/ 64 <1382400000>;
+ opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1209600 * 32)>;
+ };
+
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1401600 * 32)>;
+ };
+
+ opp-1651200000 {
+ opp-hz = /bits/ 64 <1651200000>;
+ opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1612800 * 32)>;
+ };
+
+ opp-1920000000 {
+ opp-hz = /bits/ 64 <1920000000>;
+ opp-peak-kBps = <(806000 * 16) (3196000 * 4) (1708800 * 32)>;
+ };
+
+ opp-2054400000 {
+ opp-hz = /bits/ 64 <2054400000>;
+ opp-peak-kBps = <(806000 * 16) (3196000 * 4) (1708800 * 32)>;
+ };
+
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-peak-kBps = <(933000 * 16) (3196000 * 4) (1708800 * 32)>;
+ };
+
+ opp-2361600000 {
+ opp-hz = /bits/ 64 <2361600000>;
+ opp-peak-kBps = <(1066000 * 16) (3196000 * 4) (1708800 * 32)>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a78-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+
+ cluster_pd: power-domain-cluster {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&cluster_sleep_0>, <&cluster_sleep_1>;
+ };
+
+ cpu_pd0: power-domain-cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&cluster_pd>;
+ domain-idle-states = <&gold_cpu_sleep_0>, <&gold_cpu_sleep_1>;
+ };
+
+ cpu_pd1: power-domain-cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&cluster_pd>;
+ domain-idle-states = <&gold_cpu_sleep_0>, <&gold_cpu_sleep_1>;
+ };
+
+ cpu_pd2: power-domain-cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&cluster_pd>;
+ domain-idle-states = <&gold_plus_cpu_sleep_0>, <&gold_plus_cpu_sleep_1>;
+ };
+
+ cpu_pd3: power-domain-cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&cluster_pd>;
+ domain-idle-states = <&gold_plus_cpu_sleep_0>, <&gold_plus_cpu_sleep_1>;
+ };
+
+ cpu_pd4: power-domain-cpu4 {
+ #power-domain-cells = <0>;
+ power-domains = <&cluster_pd>;
+ domain-idle-states = <&gold_plus_cpu_sleep_0>, <&gold_plus_cpu_sleep_1>;
+ };
+
+ cpu_pd5: power-domain-cpu5 {
+ #power-domain-cells = <0>;
+ power-domains = <&cluster_pd>;
+ domain-idle-states = <&gold_plus_cpu_sleep_0>, <&gold_plus_cpu_sleep_1>;
+ };
+ };
+
+ reserved_memory: reserved-memory {
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ hyp_qheebsp_mem: hyp-qheebsp-region@80000000 {
+ reg = <0x0 0x80000000 0x0 0x200000>;
+ no-map;
+ };
+
+ hyp_data_mem: hyp-data-region@80200000 {
+ reg = <0x0 0x80200000 0x0 0x400000>;
+ no-map;
+ };
+
+ hyp_rm_hypx_mem: hyp-rm-hypx-region@80600000 {
+ reg = <0x0 0x80600000 0x0 0x200000>;
+ no-map;
+ };
+
+ cpusys_vm_mem: cpusys-vm-region@80800000 {
+ reg = <0x0 0x80800000 0x0 0x400000>;
+ no-map;
+ };
+
+ hyp_heap_mem: hyp-heap-region@80c00000 {
+ reg = <0x0 0x80c00000 0x0 0x200000>;
+ no-map;
+ };
+
+ hyp_tags_mem: hyp-tags-region@80e00000 {
+ reg = <0x0 0x80e00000 0x0 0x3d0000>;
+ no-map;
+ };
+
+ xbl_dt_log_mem: xbl-dt-log-region@81a00000 {
+ reg = <0x0 0x81a00000 0x0 0x40000>;
+ no-map;
+ };
+
+ xbl_ramdump_mem: xbl-ramdump-region@81a40000 {
+ reg = <0x0 0x81a40000 0x0 0x1c0000>;
+ no-map;
+ };
+
+ aop_image_mem: aop-image-region@81c00000 {
+ reg = <0x0 0x81c00000 0x0 0x60000>;
+ no-map;
+ };
+
+ aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
+ compatible = "qcom,cmd-db";
+ reg = <0x0 0x81c60000 0x0 0x20000>;
+ no-map;
+ };
+
+ aop_config_mem: aop-config-region@81c80000 {
+ reg = <0x0 0x81c80000 0x0 0x20000>;
+ no-map;
+ };
+
+ tme_crash_dump_mem: tme-crash-dump-region@81ca0000 {
+ reg = <0x0 0x81ca0000 0x0 0x40000>;
+ no-map;
+ };
+
+ tme_log_mem: tme-log-region@81ce0000 {
+ reg = <0x0 0x81ce0000 0x0 0x4000>;
+ no-map;
+ };
+
+ uefi_log_mem: uefi-log-region@81ce4000 {
+ reg = <0x0 0x81ce4000 0x0 0x10000>;
+ no-map;
+ };
+
+ chipinfo_mem: chipinfo-region@81cf4000 {
+ reg = <0x0 0x81cf4000 0x0 0x1000>;
+ no-map;
+ };
+
+ secdata_apss_mem: secdata-apss-region@81cff000 {
+ reg = <0x0 0x81cff000 0x0 0x1000>;
+ no-map;
+ };
+
+ smem_mem: smem@81d00000 {
+ compatible = "qcom,smem";
+ reg = <0x0 0x81d00000 0x0 0x200000>;
+ hwlocks = <&tcsr_mutex 3>;
+ no-map;
+ };
+
+ global_sync_mem: global-sync-region@82600000 {
+ reg = <0x0 0x82600000 0x0 0x100000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat-region@82700000 {
+ reg = <0x0 0x82700000 0x0 0x100000>;
+ no-map;
+ };
+
+ video_mem: video-region@88d00000 {
+ reg = <0x0 0x88d00000 0x0 0x700000>;
+ no-map;
+ };
+
+ adsp_mem: adsp-region@89400000 {
+ reg = <0x0 0x89400000 0x0 0x2100000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp-region@8b500000 {
+ reg = <0x0 0x8b500000 0x0 0xf00000>;
+ no-map;
+ };
+
+ ipa_fw_mem: ipa-fw-region@8d500000 {
+ reg = <0x0 0x8d500000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: ipa-gsi-region@8d510000 {
+ reg = <0x0 0x8d510000 0x0 0xa000>;
+ no-map;
+ };
+
+ gpu_microcode_mem: gpu-microcode-region@8d51a000 {
+ reg = <0x0 0x8d51a000 0x0 0x2000>;
+ no-map;
+ };
+
+ spss_mem: spss-region@8d600000 {
+ reg = <0x0 0x8d600000 0x0 0x180000>;
+ no-map;
+ };
+
+ spu_tz_shared_mem: spu-tz-shared-region@8d780000 {
+ reg = <0x0 0x8d780000 0x0 0x80000>;
+ no-map;
+ };
+
+ cvp_mem: cvp-region@8d800000 {
+ reg = <0x0 0x8d800000 0x0 0x700000>;
+ no-map;
+ };
+
+ camera_mem: camera-region@8df00000 {
+ reg = <0x0 0x8df00000 0x0 0x800000>;
+ no-map;
+ };
+
+ cpucp_fw_mem: cpucp-fw-region@d8000000 {
+ reg = <0x0 0xd8000000 0x0 0x100000>;
+ no-map;
+ };
+
+ xbl_sc_mem: xbl-sc-region@d8100000 {
+ reg = <0x0 0xd8100000 0x0 0x40000>;
+ no-map;
+ };
+
+ tz_reserved_mem: tz-reserved-region@d8140000 {
+ reg = <0x0 0xd8140000 0x0 0x1c0000>;
+ no-map;
+ };
+
+ qtee_mem: qtee-region@d8300000 {
+ reg = <0x0 0xd8300000 0x0 0x500000>;
+ no-map;
+ };
+
+ ta_mem: ta-region@d8800000 {
+ reg = <0x0 0xd8800000 0x0 0x3000000>;
+ no-map;
+ };
+
+ tz_tags_mem: tz-tags-region@db800000 {
+ reg = <0x0 0xdb800000 0x0 0xf00000>;
+ no-map;
+ };
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,halliday-gcc";
+ reg = <0x0 0x00100000 0x0 0x1f4200>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&ufs_mem_phy 0>,
+ <&ufs_mem_phy 1>,
+ <&ufs_mem_phy 2>,
+ <0>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ config_noc: interconnect@1500000 {
+ compatible = "qcom,halliday-config-noc";
+ reg = <0x0 0x01500000 0x0 0x13080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@1680000 {
+ compatible = "qcom,halliday-system-noc";
+ reg = <0x0 0x01680000 0x0 0x13080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ pcie_anoc: interconnect@16c0000 {
+ compatible = "qcom,halliday-pcie-anoc";
+ reg = <0x0 0x016c0000 0x0 0xc080>;
+ clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+ <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_SF_AXI_CLK>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ compatible = "qcom,halliday-aggre1-noc";
+ reg = <0x0 0x016e0000 0x0 0x9080>;
+ clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre2_noc: interconnect@1700000 {
+ compatible = "qcom,halliday-aggre2-noc";
+ reg = <0x0 0x01700000 0x0 0x15080>;
+ clocks = <&rpmhcc RPMH_IPA_CLK>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mmss_noc: interconnect@1740000 {
+ compatible = "qcom,halliday-mmss-noc";
+ reg = <0x0 0x01740000 0x0 0x1c100>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ ufs_mem_hc: ufshc@1d84000 {
+ compatible = "qcom,halliday-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0x0 0x01d84000 0x0 0x3000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ operating-points-v2 = <&ufs_opp_table>;
+
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+ #reset-cells = <1>;
+
+ interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "ufs-ddr",
+ "cpu-ufs";
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ iommus = <&apps_smmu 0x60 0x0>;
+ dma-coherent;
+
+ lanes-per-direction = <2>;
+ phys = <&ufs_mem_phy>;
+ phy-names = "ufsphy";
+
+ qcom,ice = <&ice>;
+
+ status = "disabled";
+
+ ufs_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000 0 0 75000000 0 0 0 0>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-150000000 {
+ opp-hz = /bits/ 64 <150000000 0 0 150000000 0 0 0 0>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000 0 0 300000000 0 0 0 0>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ ufs_mem_phy: phy@1d87000 {
+ compatible = "qcom,halliday-qmp-ufs-phy", "qcom,sm8450-qmp-ufs-phy";
+ reg = <0x0 0x01d87000 0x0 0x1000>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+ <&gcc GCC_UFS_0_CLKREF_EN>;
+ clock-names = "ref",
+ "ref_aux",
+ "qref";
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ ice: crypto@1d88000 {
+ compatible = "qcom,halliday-inline-crypto-engine",
+ "qcom,inline-crypto-engine";
+ reg = <0x0 0x01d88000 0x0 0x18000>;
+
+ clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>;
+ clock-names = "core",
+ "iface";
+
+ operating-points-v2 = <&ice_opp_table>;
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+
+ ice_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-201500000 {
+ opp-hz = /bits/ 64 <201500000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-403000000 {
+ opp-hz = /bits/ 64 <403000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x0 0x01f40000 0x0 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ tcsr: syscon@1fc0000 {
+ compatible = "qcom,halliday-tcsr", "syscon";
+ reg = <0x0 0x01fc0000 0x0 0x30000>;
+ };
+
+ lpass_ag_noc: interconnect@3c40000 {
+ compatible = "qcom,halliday-lpass-ag-noc";
+ reg = <0x0 0x03c40000 0x0 0x17200>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ usb_1_hsphy: phy@88e3000 {
+ compatible = "qcom,halliday-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0x0 0x088e3000 0x0 0x400>;
+
+ clocks = <&gcc GCC_USB2_0_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_1: usb@a600000 {
+ compatible = "qcom,halliday-dwc3", "qcom,snps-dwc3";
+ reg = <0x0 0x0a600000 0x0 0xfc100>;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ iommus = <&apps_smmu 0x40 0x0>;
+ dma-coherent;
+
+ interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "usb-ddr",
+ "apps-usb";
+
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+
+ status = "disabled";
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,halliday-pdc", "qcom,pdc";
+ reg = <0x0 0x0b220000 0x0 0x30000>,
+ <0x0 0x174000f0 0x0 0x64>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ qcom,pdc-ranges = <0 480 94>,
+ <94 609 31>,
+ <125 63 1>,
+ <126 716 12>;
+ };
+
+ tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,halliday-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c263000 0x0 0x1000>,
+ <0x0 0x0c222000 0x0 0x1000>;
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+ #thermal-sensor-cells = <1>;
+ #qcom,sensors = <16>;
+ };
+
+ tsens1: thermal-sensor@c265000 {
+ compatible = "qcom,halliday-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c265000 0x0 0x1000>,
+ <0x0 0x0c223000 0x0 0x1000>;
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+ #thermal-sensor-cells = <1>;
+ #qcom,sensors = <15>;
+ };
+
+ spmi_bus: spmi@c400000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0 0x0c400000 0x0 0x3000>,
+ <0x0 0x0c500000 0x0 0x400000>,
+ <0x0 0x0c440000 0x0 0x80000>,
+ <0x0 0x0c4c0000 0x0 0x20000>,
+ <0x0 0x0c42d000 0x0 0x4000>;
+ reg-names = "core",
+ "chnls",
+ "obsrvr",
+ "intr",
+ "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ };
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,halliday-tlmm";
+ reg = <0x0 0x0f100000 0x0 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 225>;
+ wakeup-parent = <&pdc>;
+ };
+
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,halliday-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+ reg = <0x0 0x15000000 0x0 0x100000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+ };
+
+ intc: interrupt-controller@17200000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x17200000 0x0 0x10000>,
+ <0x0 0x17260000 0x0 0x100000>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x20000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ timer@17420000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x17420000 0x0 0x1000>;
+ ranges = <0x0 0x0 0x0 0x20000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ frame@17421000 {
+ reg = <0x17421000 0x1000>,
+ <0x17422000 0x1000>;
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ frame@17423000 {
+ reg = <0x17423000 0x1000>;
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+ };
+
+ frame@17425000 {
+ reg = <0x17425000 0x1000>;
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+ };
+
+ frame@17427000 {
+ reg = <0x17427000 0x1000>;
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+ };
+
+ frame@17429000 {
+ reg = <0x17429000 0x1000>;
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+ };
+
+ frame@1742b000 {
+ reg = <0x1742b000 0x1000>;
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+ };
+
+ frame@1742d000 {
+ reg = <0x1742d000 0x1000>;
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@17a00000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x0 0x17a00000 0x0 0x10000>,
+ <0x0 0x17a10000 0x0 0x10000>,
+ <0x0 0x17a20000 0x0 0x10000>;
+ reg-names = "drv-0",
+ "drv-1",
+ "drv-2";
+ label = "apps_rsc";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&cluster_pd>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>,
+ <WAKE_TCS 2>, <CONTROL_TCS 0>;
+
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
+ };
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,halliday-rpmh-clk";
+ #clock-cells = <1>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ };
+
+ rpmhpd: power-controller {
+ compatible = "qcom,halliday-rpmhpd", "qcom,sm8450-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp-16 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_low_svs: opp-64 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_low_svs_l1: opp-80 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+ };
+
+ rpmhpd_opp_svs: opp-128 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l0: opp-144 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+ };
+
+ rpmhpd_opp_svs_l1: opp-192 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_svs_l2: opp-224 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+ };
+
+ rpmhpd_opp_nom: opp-256 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l0: opp-288 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L0>;
+ };
+
+ rpmhpd_opp_nom_l1: opp-320 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp-336 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp-384 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l0: opp-400 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L0>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp-416 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+
+ rpmhpd_opp_turbo_l2: opp-432 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L2>;
+ };
+ };
+ };
+ };
+
+ epss_l3: interconnect@17d90000 {
+ compatible = "qcom,halliday-epss-l3", "qcom,epss-l3";
+ reg = <0x0 0x17d90000 0x0 0x1000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPLL0>;
+ clock-names = "xo",
+ "alternate";
+ #interconnect-cells = <1>;
+ };
+
+ cpufreq_hw: cpufreq@17d91000 {
+ compatible = "qcom,halliday-cpufreq-epss", "qcom,cpufreq-epss";
+ reg = <0x0 0x17d91000 0x0 0x1000>,
+ <0x0 0x17d92000 0x0 0x1000>;
+ reg-names = "freq-domain0",
+ "freq-domain1";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPLL0>;
+ clock-names = "xo",
+ "alternate";
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dcvsh-irq-0",
+ "dcvsh-irq-1";
+ #freq-domain-cells = <1>;
+ #clock-cells = <1>;
+ };
+
+ gem_noc: interconnect@19100000 {
+ compatible = "qcom,halliday-gem-noc";
+ reg = <0x0 0x19100000 0x0 0xa9080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ nsp_noc: interconnect@320c0000 {
+ compatible = "qcom,halliday-nsp-noc";
+ reg = <0x0 0x320c0000 0x0 0x10000>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+ };
+
+ thermal-zones {
+ aoss0-thermal {
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ aoss0-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ aoss0-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ aoss1-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ aoss1-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera0-thermal {
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ camera0-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ camera0-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera1-thermal {
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ camera1-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ camera1-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-0-thermal {
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ cpu0-0-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-1-thermal {
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ cpu0-1-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-0-thermal {
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cpu1-0-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-1-thermal {
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu1-1-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-0-thermal {
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu2-0-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-1-thermal {
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu2-1-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-0-thermal {
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu3-0-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-1-thermal {
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu3-1-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu4-0-thermal {
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpu4-0-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu4-1-thermal {
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ cpu4-1-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-0-thermal {
+ thermal-sensors = <&tsens0 13>;
+
+ trips {
+ cpu5-0-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-1-thermal {
+ thermal-sensors = <&tsens0 14>;
+
+ trips {
+ cpu5-1-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss0_thermal: cpuss0-thermal {
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ cpuss0-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ cpuss0-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss1_thermal: cpuss1-thermal {
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ cpuss1-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ cpuss1-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ ddr-thermal {
+ thermal-sensors = <&tsens0 15>;
+
+ trips {
+ ddr-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ ddr-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss0-thermal {
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ gpuss0-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ gpuss0-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss1-thermal {
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ gpuss1-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ gpuss1-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss2-thermal {
+ thermal-sensors = <&tsens1 9>;
+
+ trips {
+ gpuss2-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ gpuss2-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss3-thermal {
+ thermal-sensors = <&tsens1 10>;
+
+ trips {
+ gpuss3-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ gpuss3-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss4-thermal {
+ thermal-sensors = <&tsens1 11>;
+
+ trips {
+ gpuss4-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ gpuss4-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss5-thermal {
+ thermal-sensors = <&tsens1 12>;
+
+ trips {
+ gpuss5-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ gpuss5-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss6-thermal {
+ thermal-sensors = <&tsens1 13>;
+
+ trips {
+ gpuss6-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ gpuss6-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss7-thermal {
+ thermal-sensors = <&tsens1 14>;
+
+ trips {
+ gpuss7-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ gpuss7-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp0-thermal {
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ nsp0-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ nsp0-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp1-thermal {
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ nsp1-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ nsp1-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp2-thermal {
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ nsp2-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ nsp2-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ video-thermal {
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ video-hot {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+
+ video-critical {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v2 16/16] arm64: dts: qcom: Add Samsung Galaxy XR
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
` (14 preceding siblings ...)
2026-11-16 21:26 ` [PATCH v2 15/16] arm64: dts: qcom: Add initial Halliday dtsi Stanislav Aleksandrov
@ 2026-11-16 21:26 ` Stanislav Aleksandrov
2026-11-16 21:40 ` sashiko-bot
15 siblings, 1 reply; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:26 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: linux-arm-msm, devicetree, linux-kernel, mfd, linux-arm-kernel,
iommu, linux-usb, linux-phy, linux-scsi, linux-crypto, linux-pm,
Stanislav Aleksandrov
Add the device tree for the Samsung Galaxy XR headset, which is based on
the Qualcomm Halliday SoC (SXR2250P).
Supported so far: the PMICs and their regulators, the power and volume
down keys, USB in high-speed peripheral mode and UFS storage.
Signed-off-by: Stanislav Aleksandrov <lightofmysoul@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/halliday-samsung-xrvst2.dts | 218 +++++++++++++++++++++
2 files changed, 219 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 9553e3aaeccb..b6f739b625d7 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -24,6 +24,7 @@ dtb-$(CONFIG_ARCH_QCOM) += glymur-hp-elitebook-x-g2q.dtb
dtb-$(CONFIG_ARCH_QCOM) += glymur-lenovo-yoga-slim7x.dtb
dtb-$(CONFIG_ARCH_QCOM) += glymur-qcb.dtb
dtb-$(CONFIG_ARCH_QCOM) += glymur-sip-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += halliday-samsung-xrvst2.dtb
dtb-$(CONFIG_ARCH_QCOM) += hamoa-advantech-som-db5830.dtb
hamoa-advantech-som-db5830-el2-dtbs := hamoa-advantech-som-db5830.dtb x1-el2.dtbo
diff --git a/arch/arm64/boot/dts/qcom/halliday-samsung-xrvst2.dts b/arch/arm64/boot/dts/qcom/halliday-samsung-xrvst2.dts
new file mode 100644
index 000000000000..6fcc1aaafd59
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/halliday-samsung-xrvst2.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2026, Stanislav Aleksandrov <lightofmysoul@gmail.com>
+ */
+
+/dts-v1/;
+
+#define PMK8550VE_SID 5
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "halliday.dtsi"
+#include "pm7550.dtsi"
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+
+/ {
+ model = "Samsung Galaxy XR";
+ compatible = "samsung,xrvst2", "qcom,halliday";
+ chassis-type = "headset";
+
+ reserved-memory {
+ video_mem: video-region@87c00000 {
+ reg = <0x0 0x87c00000 0x0 0x700000>;
+ no-map;
+ };
+
+ adsp_mem: adsp-region@88300000 {
+ reg = <0x0 0x88300000 0x0 0x3400000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp-region@8b700000 {
+ reg = <0x0 0x8b700000 0x0 0xf00000>;
+ no-map;
+ };
+
+ sec_xbl_ramdump_mem: sec-xbl-ramdump-region@a7d00000 {
+ reg = <0x0 0xa7d00000 0x0 0x300000>;
+ no-map;
+ };
+
+ uh_heap_mem: uh-heap-region@b0200000 {
+ reg = <0x0 0xb0200000 0x0 0x40000>;
+ no-map;
+ };
+
+ uh_guest_mem: uh-guest-region@b1000000 {
+ reg = <0x0 0xb1000000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ splash_mem: splash-region@bfc00000 {
+ reg = <0x0 0xbfc00000 0x0 0x7e90000>;
+ no-map;
+ };
+
+ sec_debug_pool_mem: sec-debug-pool-region@800100000 {
+ reg = <0x8 0x00100000 0x0 0xff000>;
+ no-map;
+ };
+
+ sec_debug_log_mem: sec-debug-log-region@8001ff000 {
+ reg = <0x8 0x001ff000 0x0 0x901000>;
+ no-map;
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm7550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vreg_l1b_0p912: ldo1 {
+ regulator-name = "vreg_l1b_0p912";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b_1p2: ldo3 {
+ regulator-name = "vreg_l3b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_2p504: ldo13 {
+ regulator-name = "vreg_l13b_2p504";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_3p072: ldo15 {
+ regulator-name = "vreg_l15b_3p072";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_l2c_1p2: ldo2 {
+ regulator-name = "vreg_l2c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vreg_l1d_0p88: ldo1 {
+ regulator-name = "vreg_l1d_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vreg_l2f_0p88: ldo2 {
+ regulator-name = "vreg_l2f_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gcc {
+ vdda-refgen-0p9-supply = <&vreg_l2f_0p88>;
+ vdda-refgen-1p2-supply = <&vreg_l2c_1p2>;
+};
+
+&pm8550vs_c {
+ status = "okay";
+};
+
+&pm8550vs_d {
+ status = "okay";
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32764>;
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 224 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l13b_2p504>;
+ vcc-max-microamp = <1300000>;
+ vccq-supply = <&vreg_l3b_1p2>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l2f_0p88>;
+ vdda-pll-supply = <&vreg_l2c_1p2>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
+ qcom,select-utmi-as-pipe-clk;
+
+ status = "okay";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l1d_0p88>;
+ vdda18-supply = <&vreg_l10b_1p8>;
+ vdda33-supply = <&vreg_l15b_3p072>;
+
+ status = "okay";
+};
+
+&xo_board {
+ clock-frequency = <76800000>;
+};
--
2.55.0
^ permalink raw reply related [flat|nested] 19+ messages in thread
* Re: [PATCH v2 16/16] arm64: dts: qcom: Add Samsung Galaxy XR
2026-11-16 21:26 ` [PATCH v2 16/16] arm64: dts: qcom: Add Samsung Galaxy XR Stanislav Aleksandrov
@ 2026-11-16 21:40 ` sashiko-bot
2026-11-16 21:59 ` Stanislav Aleksandrov
0 siblings, 1 reply; 19+ messages in thread
From: sashiko-bot @ 2026-11-16 21:40 UTC (permalink / raw)
To: Stanislav Aleksandrov, Bjorn Andersson, Konrad Dybcio, Abel Vesa,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Robert Marko,
Guru Das Srinagesh, Thomas Gleixner, Radu Rendec, Lee Jones,
Will Deacon, Robin Murphy, Joerg Roedel (AMD), Greg Kroah-Hartman,
Wesley Cheng, Vinod Koul, Neil Armstrong, Manivannan Sadhasivam,
Alim Akhtar, Bart Van Assche, Bean Huo, Stanley Jhu, Herbert Xu,
David S. Miller, Rafael J. Wysocki, Viresh Kumar, Amit Kucheria,
Thara Gopinath, Daniel Lezcano, Zhang Rui, Lukasz Luba,
Georgi Djakov, Sibi Sankar, Ulf Hansson
Cc: devicetree, mfd, linux-usb, linux-phy, linux-scsi, linux-crypto,
olteanv
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Low] arm64: dts: qcom: halliday-samsung-xrvst2: invalid chassis-type
value headset
--
commit a88ca65d1f6d17d4cfe0ce907c523f8698e465a8
Author: Stanislav Aleksandrov <lightofmysoul@gmail.com>
arm64: dts: qcom: Add Samsung Galaxy XR
This commit adds the device tree for the Qualcomm Halliday-based Samsung
Galaxy XR headset, with initial support for PMICs, keys, USB peripheral mode,
and UFS storage.
> diff --git a/arch/arm64/boot/dts/qcom/halliday-samsung-xrvst2.dts b/arch/arm64/boot/dts/qcom/halliday-samsung-xrvst2.dts
> new file mode 100644
> index 0000000000000..6fcc1aaafd59c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/halliday-samsung-xrvst2.dts
> @@ -0,0 +1,218 @@
[ ... ]
> +/ {
> + model = "Samsung Galaxy XR";
> + compatible = "samsung,xrvst2", "qcom,halliday";
> + chassis-type = "headset";
[Severity: Low]
Does chassis-type = "headset" fail dtbs_check validation?
The Devicetree Specification and dtschema (schemas/root-node.yaml) restrict
chassis-type to desktop, laptop, convertible, server, tablet, handset, watch,
embedded, television, and all-in-one. Other Qualcomm headset device trees
either omit chassis-type (sm8650-valve-deckard.dts) or use "embedded"
(sar2130p-qar2130p.dts).
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261116-halliday-dts-v2-0-2c92438c6c46@gmail.com?part=16
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v2 16/16] arm64: dts: qcom: Add Samsung Galaxy XR
2026-11-16 21:40 ` sashiko-bot
@ 2026-11-16 21:59 ` Stanislav Aleksandrov
0 siblings, 0 replies; 19+ messages in thread
From: Stanislav Aleksandrov @ 2026-11-16 21:59 UTC (permalink / raw)
To: sashiko-reviews
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, devicetree, linux-arm-msm
On 16/11/2026 21:40, sashiko-bot@kernel.org wrote:
> Does chassis-type = "headset" fail dtbs_check validation?
"headset" was added to dt-schema recently:
https://github.com/devicetree-org/dt-schema/commit/bcb597bbb0c988b490fdd6ed08d023d6ddc538b9
Stanislav
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2026-11-16 22:00 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-16 21:26 [PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 01/16] dt-bindings: interrupt-controller: qcom,pdc: Document Halliday PDC Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 02/16] dt-bindings: power: qcom,rpmpd: document the Halliday RPMh Power Domains Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 03/16] dt-bindings: mfd: qcom,tcsr: Add Halliday TCSR Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 04/16] dt-bindings: arm-smmu: Add Halliday SMMU Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 05/16] dt-bindings: usb: qcom,snps-dwc3: Add Halliday Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 06/16] dt-bindings: phy: qcom,usb-snps-femto-v2: Add Halliday HS PHY Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 07/16] dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: Add Halliday Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 08/16] dt-bindings: ufs: qcom,sc7180-ufshc: Add Halliday UFS Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 09/16] dt-bindings: crypto: qcom,inline-crypto-engine: Add Halliday Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 10/16] dt-bindings: thermal: qcom-tsens: Document the Halliday Temperature Sensor Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 11/16] dt-bindings: firmware: qcom,scm: Document Halliday SCM Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 12/16] dt-bindings: arm: qcom: Add Samsung Galaxy XR Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 13/16] dt-bindings: arm: qcom,ids: Add SoC ID for SXR2250P Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 14/16] soc: qcom: socinfo: Add SXR2250P SoC ID Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 15/16] arm64: dts: qcom: Add initial Halliday dtsi Stanislav Aleksandrov
2026-11-16 21:26 ` [PATCH v2 16/16] arm64: dts: qcom: Add Samsung Galaxy XR Stanislav Aleksandrov
2026-11-16 21:40 ` sashiko-bot
2026-11-16 21:59 ` Stanislav Aleksandrov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox