From: Zi-Yu Chen <zychennvt@gmail.com>
To: rafael@kernel.org, daniel.lezcano@kernel.org
Cc: ychuang3@nuvoton.com, schung@nuvoton.com, p.zabel@pengutronix.de,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
rui.zhang@intel.com, lukasz.luba@arm.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
Zi-Yu Chen <zychennvt@gmail.com>
Subject: [PATCH 0/4] Add Nuvoton MA35D1 thermal sensor support
Date: Tue, 17 Nov 2026 14:04:57 +0800 [thread overview]
Message-ID: <20261117060501.2611071-1-zychennvt@gmail.com> (raw)
This series adds support for the on-chip temperature sensor of the
Nuvoton MA35D1 SoC.
The sensor has no register region of its own; it is controlled through
a single register in the system management (SYS) block, which is
already described in DT and bound to the MA35D1 reset driver. Rather
than adding a child node that would only exist to instantiate a driver,
the SYS node is made the thermal sensor provider, and the reset driver
creates an auxiliary device that the thermal driver binds to.
Patch 1 documents #thermal-sensor-cells for the SYS node, patch 2 makes
the reset driver create the auxiliary device, patch 3 adds the thermal
driver and patch 4 adds the thermal zone to the SoC dtsi.
Tested on the MA35D1-SOM board.
Zi-Yu Chen (4):
dt-bindings: reset: nuvoton,ma35d1-reset: Add #thermal-sensor-cells
reset: ma35d1: Register auxiliary device for the temperature sensor
thermal/drivers/ma35d1: Add Nuvoton MA35D1 thermal sensor driver
arm64: dts: nuvoton: ma35d1: Add thermal zone
.../bindings/reset/nuvoton,ma35d1-reset.yaml | 13 +-
arch/arm64/boot/dts/nuvoton/ma35d1.dtsi | 16 ++
drivers/reset/Kconfig | 1 +
drivers/reset/reset-ma35d1.c | 11 +-
drivers/thermal/Kconfig | 11 ++
drivers/thermal/Makefile | 1 +
drivers/thermal/ma35d1_thermal.c | 149 ++++++++++++++++++
7 files changed, 198 insertions(+), 4 deletions(-)
create mode 100644 drivers/thermal/ma35d1_thermal.c
--
2.34.1
next reply other threads:[~2026-11-17 6:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 6:04 Zi-Yu Chen [this message]
2026-11-17 6:04 ` [PATCH 1/4] dt-bindings: reset: nuvoton,ma35d1-reset: Add #thermal-sensor-cells Zi-Yu Chen
2026-11-17 6:04 ` [PATCH 2/4] reset: ma35d1: Register auxiliary device for the temperature sensor Zi-Yu Chen
2026-11-17 6:05 ` [PATCH 3/4] thermal/drivers/ma35d1: Add Nuvoton MA35D1 thermal sensor driver Zi-Yu Chen
2026-11-17 6:23 ` sashiko-bot
2026-11-17 6:05 ` [PATCH 4/4] arm64: dts: nuvoton: ma35d1: Add thermal zone Zi-Yu Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117060501.2611071-1-zychennvt@gmail.com \
--to=zychennvt@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=rui.zhang@intel.com \
--cc=schung@nuvoton.com \
--cc=ychuang3@nuvoton.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox