From: Zi-Yu Chen <zychennvt@gmail.com>
To: rafael@kernel.org, daniel.lezcano@kernel.org
Cc: ychuang3@nuvoton.com, schung@nuvoton.com, p.zabel@pengutronix.de,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
rui.zhang@intel.com, lukasz.luba@arm.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
Zi-Yu Chen <zychennvt@gmail.com>
Subject: [PATCH 1/4] dt-bindings: reset: nuvoton,ma35d1-reset: Add #thermal-sensor-cells
Date: Tue, 17 Nov 2026 14:04:58 +0800 [thread overview]
Message-ID: <20261117060501.2611071-2-zychennvt@gmail.com> (raw)
In-Reply-To: <20261117060501.2611071-1-zychennvt@gmail.com>
The system management (SYS) block of the MA35D1 SoC also hosts the
on-chip temperature sensor. The sensor is controlled through a single
SYS register and has no resources of its own.
Allow the SYS node to act as a thermal sensor provider instead of
adding a child node that would only exist to instantiate a driver.
Reference the common thermal-sensor schema and update the title to
reflect that the node describes the whole SYS block. This makes
#thermal-sensor-cells a required property, which is fine as the sensor
is always present in the SoC and no driver depends on the property.
Signed-off-by: Zi-Yu Chen <zychennvt@gmail.com>
---
.../bindings/reset/nuvoton,ma35d1-reset.yaml | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
index 3ce7dcecd87a..a0cb0f98c1b1 100644
--- a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/reset/nuvoton,ma35d1-reset.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Nuvoton MA35D1 Reset Controller
+title: Nuvoton MA35D1 System Management (SYS) Block
maintainers:
- Chi-Fang Li <cfli0@nuvoton.com>
@@ -12,7 +12,10 @@ maintainers:
description:
The system reset controller can be used to reset various peripheral
- controllers in MA35D1 SoC.
+ controllers in MA35D1 SoC. It also hosts the on-chip temperature sensor.
+
+allOf:
+ - $ref: /schemas/thermal/thermal-sensor.yaml#
properties:
compatible:
@@ -26,12 +29,15 @@ properties:
'#reset-cells':
const: 1
+ '#thermal-sensor-cells':
+ const: 0
+
required:
- compatible
- reg
- '#reset-cells'
-additionalProperties: false
+unevaluatedProperties: false
examples:
# system reset controller node:
@@ -41,6 +47,7 @@ examples:
compatible = "nuvoton,ma35d1-reset", "syscon";
reg = <0x40460000 0x200>;
#reset-cells = <1>;
+ #thermal-sensor-cells = <0>;
};
...
--
2.34.1
next prev parent reply other threads:[~2026-11-17 6:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 6:04 [PATCH 0/4] Add Nuvoton MA35D1 thermal sensor support Zi-Yu Chen
2026-11-17 6:04 ` Zi-Yu Chen [this message]
2026-11-17 6:04 ` [PATCH 2/4] reset: ma35d1: Register auxiliary device for the temperature sensor Zi-Yu Chen
2026-11-17 6:05 ` [PATCH 3/4] thermal/drivers/ma35d1: Add Nuvoton MA35D1 thermal sensor driver Zi-Yu Chen
2026-11-17 6:23 ` sashiko-bot
2026-11-17 6:05 ` [PATCH 4/4] arm64: dts: nuvoton: ma35d1: Add thermal zone Zi-Yu Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117060501.2611071-2-zychennvt@gmail.com \
--to=zychennvt@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=rui.zhang@intel.com \
--cc=schung@nuvoton.com \
--cc=ychuang3@nuvoton.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox