* [RFC] PCI: dwc: eswin: proposal for a separate EGC-series driver
@ 2026-11-18 10:57 Donghui Zhao
0 siblings, 0 replies; only message in thread
From: Donghui Zhao @ 2026-11-18 10:57 UTC (permalink / raw)
To: linux-pci, Bjorn Helgaas, Lorenzo Pieralisi,
Krzysztof Wilczyński, Manivannan Sadhasivam
Cc: Rob Herring, devicetree, linux-kernel, zhengyu
Hello PCI maintainers,
ESWIN Computing is preparing support for a new EGC series of SoCs. The
PCIe controllers in these SoCs are still based on the Synopsys DesignWare
core, but the SoC integration around the core differs considerably from
the EIC7700 controller supported by
drivers/pci/controller/dwc/pcie-eswin.c. Reusing the existing driver
would require a large amount of per-SoC conditional code, so we would
prefer to keep the new support in a separate driver.
Before posting the full series, could you confirm the preferred upstream
structure?
a) Add a new host-only driver in
drivers/pci/controller/dwc/pcie-eswin-egc.c, with a separate
CONFIG_PCIE_ESWIN_EGC Kconfig symbol and Makefile entry, while
reusing the common DesignWare host code.
b) Extend pcie-eswin.c with additional of_device_id data and per-SoC
operations, so that a single ESWIN driver covers both controller
generations.
If (a) is acceptable, is pcie-eswin-egc.c the preferred file name? The
differences from EIC7700 are at the SoC-integration level rather than in
the DesignWare core programming; a detailed list will be included in the
cover letter of the full series.
We will follow up with the driver, the DT binding and the MAINTAINERS
update as a complete series once the direction is agreed.
Thanks,
Donghui Zhao
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-11-18 10:57 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-18 10:57 [RFC] PCI: dwc: eswin: proposal for a separate EGC-series driver Donghui Zhao
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox